|
|
Número de pieza | AT-264TR | |
Descripción | Digital Attenuator/ 4 Bit/ Single Control 30 dB/ 0.5 - 2.0 GHz | |
Fabricantes | Tyco Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AT-264TR (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Digital Attenuator, 4 Bit, Single Control, 30 dB, 0.5 - 2.0 GHz
AT-264
AT-264
Digital Attenuator, 4 Bit, Single Control
30 dB, 0.5 - 2.0 GHz
Features
• Single Control CMOS logic for each bit
• Attenuation 2 dB steps to 30 dB
• Low DC Power Consumtion: 50 uW
• Low Cost Plastic TSSOP-16 Package
Description
The M/A-COM AT-264 is a 4 bit, 2 dB step GaAs MMIC
digital attenuator in a low cost TSSOP-16 surface mount plastic
package. The AT-264 is ideally suited for use where high
accuracy, very low power consumption and low intermodula-
tion products are required. Typical applications include radio,
cellular, wireless LANs, GPS equipment and other gain/level
control circuits.
The AT-264 is fabricated using a mature 1 micron GaAs
MESFET process. The process features full chip passivation
for increased performance and reliability.
TSSOP-161
PN 16
25
24
6,0
6,2
PN 1
.025
0,6
20
19
5,1
4,0
.03
03
0,9
0,8
.17
.16
4,0
4,2
1. Dimensions are in inches/mm.
Ordering Information
Part Number
Package
AT-264
AT-264TR
TSSOP 16-Lead Plastic
Tape and Reel1
1. Refer to Application Note M513 for reel size information.
Electrical Specifications: TA = +25°C1
Parameter
Reference Insertion Loss
Attenuation Accuracy
VSWR
Trise, Tfall
Ton, Toff
Transients
Test Conditions
0.5 - 1.0 GHz
0.5 - 2.0 GHz
0.5 - 1.0 GHz
0.5 - 2.0 GHz
1.0 - 1.5 GHz
0.5 - 2.0 GHz
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
in Band
1 dB Compression
IP2
IP3
Input Power
Input Power
Measured Relative to
Input Power2
Measured Relative to
Input Power2
0.5 GHz
0.9 GHz
0.5 GHz
0.5 - 2.0 GHz
0.5 GHz
0.5 - 2.0 GHz
Units Min.
Typ.
Max.
dB 1.6 1.8
dB 1.8 2.0
±(0.15 dB + 5% of Attenuation setting in dB) dB
±(0.3 dB + 5% of Attenuation setting in dB) dB
1.5:1
1.9:1
µS 3
µS 3
mV 75
dBm
25
dBm
25
dBm
65
dBm
71
dBm
43
dBm
47
1. All measurements at 900 MHz in a 50Ω system unless otherwise specified. Loss varies at 0.003 dB/°C.
2. For two-tone Input Power up to +5 dBm.
M/A-COM Division of AMP Incorporated 3 North America: Tel. (800) 366-2266, Fax (800) 618-8883 3 Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087
3 Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
V3.00
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet AT-264TR.PDF ] |
Número de pieza | Descripción | Fabricantes |
AT-264TR | Digital Attenuator/ 4 Bit/ Single Control 30 dB/ 0.5 - 2.0 GHz | Tyco Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |