Datasheet.kr   

ADC8032A 데이터시트 PDF




ETC에서 제조한 전자 부품 ADC8032A은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 ADC8032A 자료 제공

부품번호 ADC8032A 기능
기능 Analog Composite to SDI Decoder
제조업체 ETC
로고 ETC 로고


ADC8032A 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 30 페이지수

미리보기를 사용할 수 없습니다

ADC8032A 데이터시트, 핀배열, 회로
Ross Video Limited
ADC-8032A
ADC-8032A-S
Analog Composite
to SDI Decoder
User Manual
www.DataSheet4U.com
Ross Part Number: 8032AD-004
Issue: 04




ADC8032A pdf, 반도체, 판매, 대치품
Power Cord and Supply Grounding Requirements
The safe operation of this product requires that a protective earth
connection be provided. This protective earth is provided by the
grounding conductor in the equipment’s supply cord. To reduce the risk
of electrical shock to operator and service personnel, this ground
conductor must be connected to an earthed ground.
This product is equipped with a Class 1 Type power supply, which for safe operation
requires the use of a protective earth connection. To reduce the risk of electrical shock,
use only properly earthed three-conductor type line cords as outlined below:
North American Line Cords 100 - 120 Volts
In North America, use only certified IEC 320-C13, 10A/125V, SVT type line cords.
Conductors are CEE color coded blue (neutral), brown (line) and green/yellow (ground).
North American product orders come equipped with a single 10A/125V SVT type line
cord for each RossGear or GearLite product ordered.
International Line Cords 200 - 240 Volts
This product is designed for use with certified IEC 320-C13, 10A/250V - H03 VV-F3G
1.00mm2 type line cords.
International product orders come equipped with a single certified 10A/250V line cord,
utilizing a molded 3-pin IEC 320-C13 type connector at one end and stripped conductors
at the other. Conductors are CEE color-coded: blue (neutral), brown (line), and
green/yellow (ground). Installation of an appropriately approved A/C wall plug certified
for the country of use by a qualified electrician is required.
Alternatively, other IEC 320 C-13 type power supply cords may be used provided that
they meet all safety requirements necessary for the country in which they are to be used.
EMC Notices
FCC
This equipment has been tested and found to comply with the limits for a class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case users
will be required to correct the interference at their own expense.
CE
This product has been tested and meets the requirements of the European CE marking
directive. A copy of the CE Declaration of Conformity can be provided upon request.
Maintenance/User Serviceable Parts
www.DataSheet4U.com
Routine maintenance to this RossGear or GearLite product is not required. This product
contains no user serviceable parts. If the module does not appear to be working properly,
please contact Technical Support using the numbers listed under the “Contact Us”
section on the last page of this manual. All RossGear GearLite products are covered by a
generous 3-year warranty and will be repaired without charge for materials or labor
within this period. See the “Warranty and Repair Policy” section in this manual for
details.

4페이지










ADC8032A 전자부품, 판매, 대치품
Introduction
In This Chapter
This chapter contains the following information sections:
A Word of Thanks
Overview
Functional Block Diagram
Features
Documentation Terms
A Word of Thanks
Congratulations on choosing the Ross Video ADC-8032A Analog Composite to SDI Decoder. You
have purchased a powerful, versatile, and advanced decoder. The ADC-8032A is part of a full line of
Digital Conversion Products within the RossGear Terminal Equipment family of products, backed by
Ross Video’s experience in engineering and design expertise since 1974.
You will be pleased at how easily your new ADC-8032A fits into your overall working environment.
Equally pleasing is the product quality, reliability and functionality. Thank-you for joining the group
of worldwide satisfied Ross Video customers!
Should you have a question pertaining to the installation operation of your ADC-8032A, please
contact us at the numbers listed in this publication. Our technical support staff is always available for
consultation, training, or service.
www.DataSheet4U.com
Overview
The ADC-8032A Analog Composite to SDI Decoder is a 10-bit broadcast quality decoder with a 12-
bit analog to digital converter. It is specifically designed for broadcast or production situations in
which an analog PAL, PAL-M, PAL-N, or NTSC composite signal must be converted to a component
SDI signal. Four SDI outputs are provided. The ADC-8032A fits into the Ross 8000 series digital
frames, with four cards in the DFR-8104A (1RU), and up to ten cards in the DFR-8110A (2RU).
Please refer to the frame User Manual for specific ventilation and cooling instructions to maintain
optimum operating conditions. This card also fits into Leitch* FR-6800 series frames to provide you
with greater installation versatility. The ADC-8032A is available in two different models:
* Leitch is a trademark of Leitch Technology Corporation
ADC-8032A User Manual (Iss. 04)
Introduction 1-1

7페이지


구       성 총 30 페이지수
다운로드[ ADC8032A.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
ADC8032A

Analog Composite to SDI Decoder

ETC
ETC

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵