Datasheet.kr   

HNC2-2.5S-15 데이터시트 PDF




Hirose Electric에서 제조한 전자 부품 HNC2-2.5S-15은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 HNC2-2.5S-15 자료 제공

부품번호 HNC2-2.5S-15 기능
기능 2.5mm Pitch Connector for Discrete Wire Connection
제조업체 Hirose Electric
로고 Hirose Electric 로고


HNC2-2.5S-15 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 7 페이지수

미리보기를 사용할 수 없습니다

HNC2-2.5S-15 데이터시트, 핀배열, 회로
2.5mm Pitch Connector for Discrete Wire Connection
HNC Series
sFeatures
1. Full Lock Mechanism
The connector is equipped with the full lock mechanism so as not be removed, unless locks are reset on both sides. This mechanism is
activated effectively to prevent cable hooking or mis-insertion.
2. Thin Type Connector
Mounting height when the connector is used at the right angle : 4.5mm
3. Mechanism to Prevent Mis-insertion
This thin type connector is equipped with the mechanism to prevent mis-
insertion.
4. Tin Plating and Gold Plating Variation
Two kinds of tin plating and gold plating types are available, and can be
chosen according to application. The tin plating is also set to a light operating
touch.
Thickness
4.5mm
Mechanism
to prevent
false-insertion
sApplications
Various business equipment, financial terminals
Full lock
mechanism
B139




HNC2-2.5S-15 pdf, 반도체, 판매, 대치품
sStraight Pin Header
[Figure 3]
qBoard Through-hole Diameter: ø1.1++00.1
[Figure 4]
Part Number
CL No.
Number of Contacts A B C
Specific No.
Tin plating
Gold plating
HNC2-2.5P- 2DS(**) 218-0012-4-**
2
12.5 7.8 2.5
Blank
02
HNC2-2.5P- 3DS(**) 218-0023-0-**
3
15 10.4 5
Blank
02
HNC2-2.5P- 4DS(**) 218-0040-0-**
4
17.5 12.9 7.5
Blank
01
HNC2-2.5P- 5DS(**) 218-0028-4-**
5
20 15.4 10
Blank
02
HNC2-2.5P- 6DS(**) 218-0043-8-**
6
22.5 17.9 12.5
Blank
01
HNC2-2.5P- 7DS(**) 218-0031-9-**
7
25 20.4 15
Blank
02
HNC2-2.5P- 8DS(**) 218-0015-2-**
8
27.5 22.8 17.5
Blank
02
HNC2-2.5P-10DS(**) 218-0018-0-**
10
32.5 27.8 22.5
Blank
02
HNC1-2.5P-12DS(**) 218-0009-0-**
12
35.5 32.8 27.5
Blank
02
HNC2-2.5P-15DS(**) 218-0046-6-**
15 45 40.4 35
Blank
Note1: Please order a quantity multiplied by 100 pcs. (Not per bag, but per piece)
Note2: The series name of the 12 contacts connector is HNC1 and the style will be partially changed.
01
Unit: mm
Dimensions
Figure 3
Figure 4
Figure 3
B142

4페이지










HNC2-2.5S-15 전자부품, 판매, 대치품
BPrecautions
1. Recommended Soldering Condition Flow: 250ç for 3 seconds
Manual soldering: 290ç for 2 seconds
2. Cleaning Condition
Refer to Nylon Connector Use Hand book.
3. Connection Condition
Refer to Nylon Connector Use Hand book.
qExtracting Crimping Contact
To extract the crimping contact from the socket housing, observe the following extraction
procedures.
sExtraction Tool Tool Name: DF-C-PO(550-0177-7) can be used.
(1) Extraction Method
As shown below in the figure, slightly pull the cable in the state where the DF1 extraction
tool tip or the 0.5 to 0.7mm board has been inserted in the lance fixed slot, the contact can
be easily removed.
Note: If the lance is pressed excessively, the contact body may be deformed, which could
result in contact failure. Therefore, be careful not to press the lance excessively.
(2) How to Adjust the Lance (Raise)
To re-insert the terminal which is removed from the socket housing, use a sharp edge
blade to raise the lance as shown below in the illustration, and then insert the contact.
Note: Lance regeneration is effective only once.
B145

7페이지


구       성 총 7 페이지수
다운로드[ HNC2-2.5S-15.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
HNC2-2.5S-10

2.5mm Pitch Connector for Discrete Wire Connection

Hirose Electric
Hirose Electric
HNC2-2.5S-15

2.5mm Pitch Connector for Discrete Wire Connection

Hirose Electric
Hirose Electric

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵