|
|
PDF AT27C1024-12JC Data sheet ( Hoja de datos )
| Número de pieza | AT27C1024-12JC | |
| Descripción | 1-Megabit 64K x 16 OTP EPROM | |
| Fabricantes | ATMEL Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AT27C1024-12JC (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
AT27C1024
Features
• Fast Read Access Time - 45 ns
• Low Power CMOS Operation
– 100 µA max. Standby
– 30 mA max. Active at 5 MHz
• JEDEC Standard Packages
– 40-Lead 600-mil PDIP
– 44-Lead PLCC
– 40-Lead TSOP (10 mm x 14 mm)
• Direct Upgrade from 512K (AT27C516) EPROM
• 5V ± 10% Power Supply
• High Reliability CMOS Technology
– 2000V ESD Protection
– 200 mA Latchup Immunity
• Rapid™ Programming Algorithm - 100 µs/word (typical)
• CMOS and TTL Compatible Inputs and Outputs
• Integrated Product Identification Code
• Commercial and Industrial Temperature Ranges
Description
The AT27C1024 is a low-power, high-performance 1,048,576 bit one-time program-
mable read only memory (OTP EPROM) organized 64K by 16 bits. It requires only
one 5V power supply in normal read mode operation. Any word can be accessed in
less than 45 ns, eliminating the need for speed reducing WAIT states. The by-16
organization make this part ideal for high-performance 16- and 32-bit microprocessor
systems.
(continued)
AT27C1024
1-Megabit
(64K x 16)
OTP EPROM
AT27C1024
Pin Configurations
Pin Name Function
A0 - A15 Addresses
O0 - O15 Outputs
CE Chip Enable
OE Output Enable
PGM
Program Strobe
NC
Note:
No Connect
Both GND pins must be
connected.
PDIP Top View
PLCC Top View
TSOP Top View
Type 1
0019I-A–7/97
1
1 page  
AC Waveforms for Read Operation(1)
Notes: 1. Timing measurement reference level is 1.5V for -45 and -55 devices. Input AC drive levels are VIL = 0.0V and VIH = 3.0V.
Timing measurement reference levels for all other speed grades are VOL = 0.8V and VOH = 2.0V. Input AC drive levels are
VIL = 0.45V and VIH = 2.4V.
2. OE may be delayed up to tCE - tOE after the falling edge of CE without impact on tCE.
3. OE may be delayed up to tACC - tOE after the address is valid without impact on tACC.
4. This parameter is only sampled and is not 100% tested.
5. Output float is defined as the point when data is no longer driven.
Pin Capacitance
(f = 1 MHz T = 25°C)(1)
Typ Max
Units
Conditions
CIN
4 10
pF VIN = 0V
COUT
8 12
pF VOUT = 0V
Note: 1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested.
Input Test Waveforms and Measurement Levels
Output Test Load
For -45 and -55
Devices Only
For -70 and slower
Devices Only
Note:
CL = 100 pF including jig
capacitance except -45 and -55
devices, where CL = 30 pF.
5 AT27C1024
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet AT27C1024-12JC.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AT27C1024-12JC | 1-Megabit 64K x 16 OTP EPROM | ATMEL Corporation |
| AT27C1024-12JI | 1-Megabit 64K x 16 OTP EPROM | ATMEL Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |