Datasheet.kr   

D10 데이터시트 PDF




STMicroelectronics에서 제조한 전자 부품 D10은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 D10 자료 제공

부품번호 D10 기능
기능 Memory Micromodules General Information for D1/ D2 and C Packaging
제조업체 STMicroelectronics
로고 STMicroelectronics 로고


D10 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 13 페이지수

미리보기를 사용할 수 없습니다

D10 데이터시트, 핀배열, 회로
D10, D15, D20, D22, C20, C30
MICROMODULES
Memory Micromodules
General Information for D1, D2 and C Packaging
s Micromodules were developed specifically for
embedding in Smartcards and Memory Cards
s The Micromodule provides:
– Support for the chip
– Electrical contacts
– Suitable embedding interface for gluing the
module to the plastic package
s Physical dimensions and contact positions
compliant to the ISO 7816 standard
s Micromodules delivered as a continuous Super
35 mm tape. (This differs from the standard
35 mm tape in the spacing distance between
the indexing holes.)
DESCRIPTION
Memory Cards consist of two main parts: the
plastic card, and the embedded Micromodule
(which, in turn, carries the silicon chip).
The plastic card is made of PVC, ABS or similar
material, and can be over-printed with graphics,
text, and magnetic strips. The Micromodule is
embedded in a cavity in the plastic card.
The Micromodules are mounted on Super 35 mm
metallized epoxy tape, and are delivered on reels.
These contain all of the chips from a number of
wafers, including those chips that were found to be
non-functioning during testing. Traceability is
ensured by a label fixed on the reel.
potting side
contact side
D15
D10
D20
D22
C30 C20
Table 1. Memory Card and Memory Tag Integrated Circuits
Modul e
Please see the data briefing sheets of these products for example illustrations of these
micromodule s
D10 ST1200, ST1305B, ST1331, ST1333, ST1335, ST1336, ST1353, ST1355
D15 ST14C02, ST1305B, ST1335, ST1336, ST1355
D20 ST14C02, M14C04, M14C16, M14C32
D22 M14C64, M14128, M14256
C30 M35101, M35102
C20 M35101, M35102
December 1999
1/13




D10 pdf, 반도체, 판매, 대치품
MICROMODULES
and one to the reel box. Each label carries the
following information:
– PRODUCT: sales type
– LOT NUMBER: reel number
– POS:
total number of positions
– GOOD:
number of good positions
– FAIL:
number of fail positions
– DATE:
date of sealing
In addition, the antistatic bag and the delivery box
carry a self adhesive plastic “ESD” warning label,
85 x 38 mm in size, indicating “Electrostatic
sensitive devices”.
Each reel is packed in a reel box, made of recycled
cardboard. The size of the reel box depends on its
origin. Several reel boxes are packed in a delivery
box, which is also made of recycled cardboard.
A delivery note is provided, listing the following
information:
– Date of sealing
– Reel numbers
– Total number of positions, with the details of
positions per reel
– Order number and customer name
– Sales type
– Tape type
RECOMMENDED ACCEPTANCE CRITERIA
The product identity should be checked against
the delivery documentation, and the quantity of
good positions on the reel recorded. The product
may be tested in accordance with the appropriate
data sheet, the conditions depending on the
product type, and the ISSUER or USER mode (for
ST13xx products).
For delivery acceptance, ST recommends
sampling the Micromodules from the beginning of
the reel. The sampling AQL should be applied, to
the ISO 2859 standard (test level II, normal test).
Table 5. Size of the Reel Box
Manufacturing Location
Size of Reel Box
Rousset
370 x 390 x 80 mm
Casablanca
373 x 370 x 78 mm
Table 6. AQL Levels
Defect
Total defects - mechanical and electrical
Mechanical defects
Electrical defects
AQL
0.65
0.65
0.65
Any observed discrepancies should be reported in
writing to the ST quality department. Table 6
shows the recommended AQL levels.
The visual and mechanical test specification and
test conditions are described in Table 7.
Defect Acceptance Rate
Each reel contains the stated number of defective
devices, distributed so that no more than 20% of
them are found in a contiguous block on the tape.
ST’s own quality acceptance standard guarantees
that the customer will be informed when the
electrical yield is less than 90%.
The part numbers and re-ordering information will
be set according to ST’s current product coding
policy, as shown on the individual product data
sheets, or as agreed with the customer.
Reels that do not pass inspection should be
returned to ST within 15 working days after
delivery.
Table 7. Visual and Mechanical Specification and Test Conditions
Test Description and Method
Reject Criteria
1 Contact area
Glue or particles, scratches print, sever defects on contact area
damaging the gold layer. Visual test distance 30 cm, naked eye.
2 Chip covering
Thickness and external dimension measurement exceeding total
thickness, or other dimensions not complying to the drawings
31 Die bond strength
Die shear force < 10 N
41 Wire bonding
Wire lift or broken at pull test with < 4 g
Note: 1. Test 3 and 4 are conducted in accordance with MIL-STD-833.
4/13

4페이지










D10 전자부품, 판매, 대치품
MICROMODULES
Figure 2. D10, D20, D22 Tape Join Specification
7/13

7페이지


구       성 총 13 페이지수
다운로드[ D10.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
D10

Memory Micromodules General Information for D1/ D2 and C Packaging

STMicroelectronics
STMicroelectronics
D1000

NPN Transistor - 2SD1000

Renesas
Renesas

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵