Datasheet.kr   

FH12F-16S-0.5SH 데이터시트 PDF




Hirose Electric에서 제조한 전자 부품 FH12F-16S-0.5SH은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 FH12F-16S-0.5SH 자료 제공

부품번호 FH12F-16S-0.5SH 기능
기능 0.5mm and 1mm Pitch Connectors For FPC/FFC
제조업체 Hirose Electric
로고 Hirose Electric 로고


FH12F-16S-0.5SH 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 19 페이지수

미리보기를 사용할 수 없습니다

FH12F-16S-0.5SH 데이터시트, 핀배열, 회로
0.5mm and 1mm Pitch Connectors For FPC/FFC
FH12 Series
Flip-lock
sFeatures
1. Ease of Use and Space Savings
Only one finger or 6.9N (Newtons) of force is required to
lock Hirose’s rotational actuator (flip-lock) as compared
to using 2 fingers and 39.2N to close a FFC/FPC
connector from our competition.
The Flip-Lock design also allows customers to place 2
or more connectors side by side as there is no need to
waste additional board space for a side latch.
2. Strengthened Flip-lock Actuator
The standard Flip-Lock requires only 2.0mm height
above the board. A strengthened lock lever is available
which only requires an additional 0.4mm.
3. Supports Thin FPC (0.18mm)
Hirose does not require double-sided FPC to have any
additional strengthening plate or stiffener and can therefore
support a thickness of as little as 0.18mm +/- 0.05.
4. Hirose Ensures Reliability
Hirose’s patented half tuning fork contacts maintain the
required normal force without relying on the connector
housing. With our competitor’s conventional products
the housing walls support the contact force, which does
not provide for long-term reliability.
5. Prevention of Solder Bridge
Excess solder cavity absorbs excessive solder and
avoids solder bridging.
6. Three different assembly types
FH12 is offered in Top & Bottom Contact and Vertical
Mount and offered in both a 0.5mm contact pitch as well
as a 1.0mm contact pitch (bottom contact only).
sApplications
Notebook computers, printers, PDAs, digital cameras and
other compact devices for interconnecting the main circuit
board with the LCD, HDD or other device.
Rotating One-touch Mechanism
q
w
e
6




FH12F-16S-0.5SH pdf, 반도체, 판매, 대치품
BConnector Operating Instructions, precautions and recommendations
qBottom Contact Type (common for 0.5mm/1mm)
Operation
Precautions
1. FPC/FFC Termination procedure.
Connector installed on the board.
1) Lift up the actuator. Use thumb or index finger.
1) Avoid grasping the actuator with two fingers or lift-
ing the actuator with fingernail.
2) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1 above.
2) Fully insert the FPC/FFC parallel to mounting sur-
face, with the exposed conductive traces facing
down.
Stiffener
FPC/FFC conductive traces
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
3) Due to the structure of the connectors, they do
not have strong resistance to upward pulling;
therefore, support the FPC/FFC when a pulling
force is applied to it.
9

4페이지










FH12F-16S-0.5SH 전자부품, 판매, 대치품
s0.5mm Pitch Bottom Contact Type
0.5
0.2
Mated Cross-sectional Diagram
FPC/FFC Contact Surface 2.1
3.1
1.3
4.6
5.6
Unit:mm
Part Number CL No. Number of Contacts A B C D
FH12-06S-0.5SH 586-0582-5
6
02.5 06.1 07.1 03.57
FH12-10S-0.5SH 586-0522-3
10
04.5 08.1 09.1 05.57
FH12-11S-0.5SH 586-0600-5
11
05.0 08.6 09.6 06.07
FH12-12S-0.5SH 586-0704-0
12
05.5 09.1 10.1 06.57
FH12-13S-0.5SH 586-0549-0
13
06.0 09.6 10.6 07.07
FH12-14S-0.5SH 586-0533-0
14
06.5 10.1 11.1 07.57
FH12-15S-0.5SH 586-0523-6
15
07.0 10.6 11.6 08.07
FH12-16S-0.5SH 586-0531-4
16
07.5 11.1 12.1 08.57
FH12-17S-0.5SH 586-0606-1
17
08.0 11.6 12.6 09.07
FH12-18S-0.5SH 586-0530-1
18
08.5 12.1 13.1 09.57
FH12-19S-0.5SH 586-0534-2
19
09.0 12.6 13.6 10.07
FH12-20S-0.5SH 586-0524-9
20
09.5 13.1 14.1 10.57
FH12-22S-0.5SH 586-0532-7
22
10.5 14.1 15.1 11.57
FH12-24S-0.5SH 586-0521-0
24
11.5 15.1 16.1 12.57
FH12-25S-0.5SH 586-0692-3
25
12.0 15.6 16.6 13.07
FH12-26S-0.5SH 586-0576-2
26
12.5 16.1 17.1 13.57
FH12-28S-0.5SH 586-0612-4
28
13.5 17.1 18.1 14.57
Note 2 FH12-30S-0.5SH 586-0525-1
30
14.5 18.1 19.1 15.57
FH12-32S-0.5SH 586-0681-7
32
15.5 19.1 20.1 16.57
FH12-33S-0.5SH 586-0520-8
33
16.0 19.6 20.6 17.07
FH12-34S-0.5SH 586-0617-8
34
16.5 20.1 21.1 17.57
FH12-36S-0.5SH 586-0526-4
36
17.5 21.1 22.1 18.57
Note 2 FH12-40S-0.5SH 586-0527-7
40
19.5 23.1 24.1 20.57
Note 2 FH12-45S-0.5SH 586-0528-0
45
22.0 25.6 26.6 23.07
Note 2 FH12-50S-0.5SH 586-0529-2
50
24.5 28.1 29.1 25.57
Note 2 FH12-53S-0.5SH 586-0595-7
53
26.0 29.6 30.6 27.07
Note 1 : Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
Note 2 : If there is no problem with the connector height, we recommend the type with the
strengthened Flip-lock actuator (FH12S-*S-0.5SH).
Standard type connector height: 2 mm
Connector height of type with strengthened Flip-lock actuator: 2.4 mm
12

7페이지


구       성 총 19 페이지수
다운로드[ FH12F-16S-0.5SH.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
FH12F-16S-0.5SH

0.5mm and 1mm Pitch Connectors For FPC/FFC

Hirose Electric
Hirose Electric

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵