Datasheet.kr   

FH18-25S-0.3SHW 데이터시트 PDF




Hirose Electric에서 제조한 전자 부품 FH18-25S-0.3SHW은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 FH18-25S-0.3SHW 자료 제공

부품번호 FH18-25S-0.3SHW 기능
기능 Low Profile 0.3mm Pitch Connectors For FPC
제조업체 Hirose Electric
로고 Hirose Electric 로고


FH18-25S-0.3SHW 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 8 페이지수

미리보기를 사용할 수 없습니다

FH18-25S-0.3SHW 데이터시트, 핀배열, 회로
Low Profile 0.3mm Pitch Connectors For FPC
FH18 Series
1.8mm height above
the mounting surface
sFeatures
1. Low profile 0.3mm pitch FPC connectors
In response to continuous miniturization of products, the demand for
smaller contact spacing on connectors is increasing. Flexible printed
circuits(FPC) with contact pitch of 0.3mm are used with increased
frequency. FH18 series connectors fullfill this requirement. In
addition, these connectors occupy less board space and are lighter
than comparable connectors with contacts spaced at 0.5mm.
2. Improved Retention of FPC
Two types of contacts design are combined in the FH18 connector,
zero insertion force(ZIF) and low insertion force(LIF). Inserted FPC is
held in place by the LIF contact, allowing operator to close down the
actuator and engage the ZIF contacts to assure complete connection.
3. Easy to use Flip-Lock Actuator
Flip-lock (rotating type) ZIF mechanism enables good connectivity of
FPC by a simple operation and light force. No board space is required
for flip lock operation as compared to slide lock ZIF connectors.
4. Placement on Board
The leads are on two sides of the connector, spaced on 0.6mm and
are visible for solder joint inspection. Flat top surface of the connector
allows board placement with automated equipment.
5. Variety of Contact Positions
The connectors are available with 17,21,25,27,39,45 and 51 contacts.
LIF terminal contacts
dFiPreCctiinosnertion
FPC
Non – ZIF Contact
Retention of FPC
Connection completed
Actuator closed
sApplications
Notebook computers, printers, PDAs, digital cameras and other
compact devices for interconnecting the main circuit board with the
LCD, PDP (Plasma Display),HDD or other device.
ZIF contact
* LIF : Low insertion Force
* ZIF : Zero insertion Force
47




FH18-25S-0.3SHW pdf, 반도체, 판매, 대치품
( 0.2 )
P=0.6
A
B
( 0.15 )
Contact #1
Position indicator
P=0.6
C
D
**
( 0.12 )
( 1.7 )
Indicates the number
of contacts
0.675
( 1.4 )
E : FPC slot dimension*
1.8(Lead is included)
0
J 0.15 MAX
12
Notes (1) Indicates the distance from J surface.
2 The coplanarity of each lead and metal fitting within 0.1.(coplanarity : The distance between the lowest and highest land)
3 This connector uses LIF(Low Insertion Force) and ZIF(Zero Insertion Force)
contact design. Slight friction will be felt during insertion of FPC in the slot.
Full insertion of FPC is required for secure connection.
Part Number
CL No.
Number of contacts
FH18-17S-0.3SHW
586-0684-5
17
FH18-21S-0.3SHW
586-0669-1
21
FH18-25S-0.3SHW
586-0685-8
25
FH18-27S-0.3SHW
586-0658-5
27
FH18-39S-0.3SHW
586-0646-6
39
FH18-45S-0.3SHW
586-0694-9
45
FH18-51S-0.3SHW
586-0671-3
51
Note : Embossed tape reel packaging (2,500 pieces/reel).
Order by number of reels.
A
07.6
08.8
10.0
10.6
14.2
16.0
17.8
B
04.2
05.4
06.6
07.2
10.8
12.6
14.4
C
04.8
06.0
07.2
07.8
11.4
13.2
15.0
D
06.15
07.35
08.55
09.15
12.75
14.55
16.35
Unit: mm
E
05.4
06.6
07.8
08.4
12.0
13.8
15.6
50

4페이지










FH18-25S-0.3SHW 전자부품, 판매, 대치품
BRecommended Temperature Profile
3 seconds or less HRS test conditions
250
Solder method
:Reflow, IR/hot air
240ç
(Nihon Den-netsu Co., Ltd.’s
Part Number: SENSBY NR-2)
200
200ç
Environment
:Room air
Solder composition :Paste, 63%Sn/37%Pb
150
150ç
160ç
(Senju Metal Industry, Co., Ltd.’s Part
Number: OZ63-201C-50-9)
Test board
:Glass epoxy 70mm∞70mm∞1.6mm thick
100 Land dimensions :0.3mm∞1.25mm
Metal mask
:0.25mm∞1.25mm∞0.15mm thick
50
25ç (60 seconds)
(30 seconds)
60-90 seconds
(20-30 seconds)
0
Start
60 Preheating 120
Soldering 180
Time (seconds)
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
53

7페이지


구       성 총 8 페이지수
다운로드[ FH18-25S-0.3SHW.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
FH18-25S-0.3SHW

Low Profile 0.3mm Pitch Connectors For FPC

Hirose Electric
Hirose Electric

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵