|
|
|
부품번호 | EZ1900CS 기능 |
|
|
기능 | REGULATOR BALANCE CONTROLLER | ||
제조업체 | Semtech Corporation | ||
로고 | |||
전체 5 페이지수
REGULATOR
BALANCE CONTROLLER
EZ1900
May 27, 1999
TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com
DESCRIPTION
The EZ1900 is a high performance positive load cur-
rent balancer designed for use in applications utiliz-
ing 2 regulators in parallel to achieve equal current
sharing or identical current for each load. The regula-
tor balance controller allows a flexible motherboard
design to be made to cope with different processor
configurations. The controller reads a logic level up-
grade signal (denoted VCC2DET on the Intel P55C; sim-
ilar on AMD, Cyrix and PowerPC microprocessors) to
control the output voltage of two linear low dropout
voltage regulators to the CPU core and I/O planes. In
single-voltage plane configurations (VCC2DET floating),
both regulators are set to the same output voltage
(usually 3.3 - 3.5V) and are configured in master-
slave mode. For split plane processors (VCC2DET low),
the outputs of the two regulators are switched - the
core voltage will be set to a nominal 2.5V while the
I/O voltage will remain at 3.3V. The actual output
voltages can be adjusted by means of resistors. The
EZ1900 programmable current balancer is available
in the popular SO-8 surface mount package.
PIN CONFIGURATION
Pin # Legend
Description
1 Sel Non-slave mode, voltage select
2 -IN Negative error amplifier input
3 +IN Positive error amplifier input
4 -V Power input, common
5 nc No Connection
6 SOUT Sets VOUT of slave device
7 +V Power input, positive
8 nc No connection
Slave Mode Pin: For non “Computer Select Operation”, the Select
Mode, pin #1, can be left open circuited for continuous slave mode
operation or balance current control. Ground the Select Mode, pin #1,
for non-slave mode operation.
FEATURES
• Current balance controller for regulators in parallel
• Slave and non-slave voltage modes
• Slave or non-slave mode computer selected
• Compatible with 3 or 5 pin low drop regulators
• Remote sense operation
• SO-8 package
APPLICATIONS
• Flexible upgrade from single voltage plane to
split-plane processors
• Intel Pentium® Processor P54CS & P55C
upgrades
• PowerPC™ 603 & 604 upgrades
• AMD5K86™ upgrades
ORDERING INFORMATION
DEVICE(1)
PACKAGE
EZ1900CS
SO-8
Note:
(1) Add suffix ‘TR’ for tape and reel.
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol Maximum Units
Input Voltage Supply
Differential
Amplifier
Slave Output Current
(sink only)
VIN
-IN, +IN
SOUT
ISLAVE
7
7
0 to +V
50
Thermal Resistance
Junction to Ambient
θJA
160
Operating Junction
Temperature Range
TJ
0 to 70
Storage
Temperature Range
TSTG -65 to 125
Lead Temperature
(Soldering) 5 Sec
TLEAD
260
V
V
mA
°C/W
°C
°C
°C
© 1999 SEMTECH CORP.
Pentium Processor is a trademark of Intel Corp. PowerPC is a trademark of IBM Corp. AMD5K86 is a trademark of Advanced Micro Devices.
1
652 MITCHELL ROAD NEWBURY PARK CA 91320
REGULATOR
BALANCE CONTROLLER
May 27, 1999
TYPICAL APPLICATIONS (cont.)
Balanced Current Controller Utilizing EZ1087 Series
EZ1900
Voltage Select
Slave Mode Operation VM = VOUT of Master
VM = VREF (1 + R4/R3) + IADJ R4
Non-Slave Mode, VS = VOUT of Slave
VS = VREF (1 + (R2 + 3Ω) / R1) + IADJ (R2 + 3Ω)
RSENSE Select
RSENSE Select; Typical selection can be
(50mV to 100mV) / (Total IOUT / 2).
Trace resistance of 10mΩ and above can easily accomodate value
required.
Balanced Current Controller Utilizing EZ1580 Series
Voltage Select
Slave Mode Operation VM = VOUT of Master
VM = VREF (1 + R4/R3) + IADJ R4
Non-Slave Mode, VS = VOUT of Slave
VS = VREF (1 + (R2 + 3Ω) / R1) + IADJ (R2 + 3Ω)
© 1999 SEMTECH CORP.
RSENSE Select
RSENSE Select (100mV Min) / (Total IOUT / 2)
The EZ1580 series requires RSENSE voltage to be less than 100mV.
Trace resistance can easily accomodate value required.
4
652 MITCHELL ROAD NEWBURY PARK CA 91320
4페이지 | |||
구 성 | 총 5 페이지수 | ||
다운로드 | [ EZ1900CS.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
EZ1900CS | REGULATOR BALANCE CONTROLLER | Semtech Corporation |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |