|
|
PDF ATTL7591AS-TR Data sheet ( Hoja de datos )
| Número de pieza | ATTL7591AS-TR | |
| Descripción | Subscriber Line Interface Circuit Protector | |
| Fabricantes | Agere Systems | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ATTL7591AS-TR (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
Data Sheet
October 1997
L7591 Subscriber Line Interface Circuit Protector
Features
Description
s Shunts lightning pulses to ground
— Positive or negative 30 A, 10 x 1000 µs
— Positive or negative 40 A, 5 x 320 µs
— Positive or negative 80 A, 2 x 10 µs
s Power-cross protection
— 3.5 APEAK, 50 Hz to 60 Hz, 1 s
— 5.0 APEAK, 50 Hz to 60 Hz, 10 ms
s Gate trigger current, 15 mA max
s Up to –80 V capability
s Holding current, 150 mA min
Pin Information
The L7591 Subscriber Line Interface Circuit (SLIC)
Protector is designed to protect line-feed circuitry
from fault-induced lightning and power-cross surge
pulses. If a fault current forces TIP and/or RING to a
more negative voltage than VS, current is conducted
through the trip circuit. When the specified trip cur-
rent level is reached, transistors PNPN1 and/or
PNPN2 will turn on and "crowbar" the majority of the
current to ground. If similar pulses force TIP and/or
RING to a more positive state than ground, diodes
D1 and/or D2 will conduct the pulse to ground. The
L7591 SLIC Protector is available in an 8-pin, plastic
DIP (L7591AB) and in an 8-pin, plastic SONB pack-
age (L7591AS).
Table 1. Pin Description
(Applies to DIP and SONB packages)
Pin Symbol
Name/Function
1 TIP Tip signal from customer.
2 VS Supply voltage to gate
(–20 V to –80 V).
3 — Test Point, do not use.
4 RING Ring signal from customer.
5 PR Protected ring signal to line-feed-
circuitry.
6 GND Device ground/fault current
return.
7 GND Device ground/fault current
return.
8 PT Protected tip signal to line-feed
circuitry.
Note: Pins 1 and 4 must always be connected to the protection
resistors shown in Figures 4 and 5 (Line Feed Circuitry). The
SLIC can be connected either to the protected outputs (pins
5 and 8) or to the inputs (pins 1 and 4).
TIP 1
VS 2
TRIP
CIRCUIT
PNPN1
8 PT
D1
7 GND
TEST
POINT
3
RING 4
TRIP
CIRCUIT
PNPN2
6 GND
D2
5 PR
12-1590 (C)
Figure 1. Functional and Pin Diagram
1 page  
Data Sheet
October 1997
L7591 Subscriber Line Interface Circuit Protector
Applications
TIP 1
RPT
2
–VS
TRIP
CIRCUIT
8
PROTECTED
TIP
7
3
RING
RPR
4
TRIP
CIRCUIT
6
5
RPT and RPR must be properly selected for proper operation and/or response.
Figure 4. Standard Configuration
PROTECTED
RING
12-1632 (C)
IP
1
2
–48 V
TRIP
CIRCUIT
3
4
IP
TRIP
CIRCUIT
Figure 5. Test Circuit
8
VMEAS
7
6
VMEAS
5
12-1596 (C)
TIP
CARBON
BLOCK
RING
CARBON
BLOCK
PTC
PTC
RELAYS
18
6
L7591AB
SLIC
2
PROTECTOR
7
45
BATTERY
FEED*
VS
(–20 V TO –80 V)
*An example device is Lucent Technologies Microelectronics Group’s LB1276 High Balance SLIC.
12-1598 (C)
Figure 6. Fully Protected Electronic TIP-RING Interface (Not all devices needed in all applications)
Lucent Technologies Inc.
5
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet ATTL7591AS-TR.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ATTL7591AS-TR | Subscriber Line Interface Circuit Protector | Agere Systems |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |