|
|
PDF AWT6134 Data sheet ( Hoja de datos )
| Número de pieza | AWT6134 | |
| Descripción | KPCS/CDMA 3.4V/28dBm Linear Power Amplifier Module | |
| Fabricantes | ANADIGICS Inc | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AWT6134 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
FEATURES
• InGaP HBT Technology
• High Efficiency: 39%
• Low Quiescent Current: 48 mA
• Low Leakage Current in Shutdown Mode: <1 µA
• VREF = +2.8 V (+2.7 V min over temp)
• Optimized for a 50 Ω System
• Low Profile Miniature Surface Mount Package:
1.56mm Max
• CDMA 1XRTT Compliant
• CDMA 1xEV-DO Compliant
APPLICATIONS
• Korean PCS CDMA Wireless Handsets
AWT6134
KPCS/CDMA 3.4V/28dBm
Linear Power Amplifier Module
PRELIMINARY DATA SHEET - Rev 1.0
M7 Package
10 Pin 4mm x 4mm
Surface Mount Module
PRODUCT DESCRIPTION
The AWT6134 meets the increasing demands for
higher efficiency and linearity in CDMA 1XRTT
handsets. The PA module is optimized for VREF = +2.8 V,
a requirement for compatibility with the Qualcomm
6000 chipset. The device is manufactured on an
advanced InGaP HBT MMIC technology offering
state-of-the-art reliability, temperature stability, and
ruggedness. Selectable bias modes that optimize
efficiency for different output power levels, and a
shutdown mode with low leakage current, increase
handset talk and standby time. The self-contained
4mm x 4mm surface mount package incorporates
matching networks optimized for output power,
efficiency, and linearity in a 50 Ω system.
GND at slug (pad)
VCC 1
10 VCC
RFIN 2
9 GND
GND 3
8 RFOUT
VMODE 4
Bias Control
7 GND
VREF 5
6 GND
Figure 1: Block Diagram
07/2003
1 page  
AWT6134
Table 5: Electrical Specifications
(TC = +25 °C, VCC = +3.4 V, VREF = +2.9 V, VMODE = +2.9 V, 50 Ω system)
PARAMETER
MIN TYP MAX UNIT
COMMENTS
Gain
Adjacent Channel Power (1)
at ±1.25 kHz offset
Primary Channel BW = 1.23 MHz
Adjacent Channel BW = 30 kHz
Adjacent Channel Power (1)
at ±2.25 MHz offset
Primary Channel BW = 1.23 MHz
Adjacent Channel BW = 30 kHz
23.5
20
-
-
-
-
25 28
23.5 27
-50 -46.5
-52 -46.5
-58 -56
-68 -57
dB
POUT = +28 dBm
POUT = +16 dBm
dBc
POUT = +28 dBm
POUT = +16 dBm
dBc
POUT = +28 dBm
POUT = +16 dBm
Power-Added Efficiency (1)
Quiescent Current (Icq)
Reference Current
Mode Control Current
Leakage Current
Noise in Receive Band
1840 MHz to 1870 MHz
Harmonics
2fo
3fo, 4fo
Input Impedance
37 40
89
-
-
%
POUT = +28 dBm
POUT = +16 dBm
- 56 68 mA VREF = +2.9 V
- 3.5 5 mA through VREF pin, PA "on"
- 0.3 0.5 mA through VMODE pin
-
<1 5
µA
VCC = +4.2 V, VREF = 0 V
VMODE = 0 V
- -135 -133 dBm/Hz POUT = +28 dBm, VMODE = +2.8 V
-
-
-45
-55
-30
-30
dBc
- - 2:1 VSWR
Spurious Output Level
(all spurious outputs)
POUT < +28 dBm
In-band load VSWR < 8:1
- - -65 dBc Out-of-band load VSWR < 8:1
Applies over all voltage and
temperature operating ranges
Load mismatch stress with no
permanent degradation or failure
8:1
-
VCC = +5.0 V, PIN = +5 dBm
- VSWR Applies over full operating
temperature range
Notes:
(1) ACPR and PAE limits apply to middle frequency only.
PRELIMINARY DATA SHEET - Rev 1.0
07/2003
5
5 Page 
NOTES
AWT6134
PRELIMINARY DATA SHEET - Rev 1.0
07/2003
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet AWT6134.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AWT6130 | Cellular Dual Mode AMPS/CDMA 3.5V 29dBm Power Amplifier Module |  ANADIGICS |
| AWT6130 | Cellular Dual Mode AMPS/CDMA 3.5V 29dBm Power Amplifier Module | ANADIGICS |
| AWT6131 | PCS/CDMA 3.5V/29dBm Linear Power Amplifier Module | ANADIGICS |
| AWT6131 | PCS/CDMA 3.5V/29dBm Linear Power Amplifier Module | ANADIGICS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |