Datasheet.kr   

BA6247FP-Y 데이터시트 PDF




ROHM Semiconductor에서 제조한 전자 부품 BA6247FP-Y은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 BA6247FP-Y 자료 제공

부품번호 BA6247FP-Y 기능
기능 Reversible motor driver
제조업체 ROHM Semiconductor
로고 ROHM Semiconductor 로고


BA6247FP-Y 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 6 페이지수

미리보기를 사용할 수 없습니다

BA6247FP-Y 데이터시트, 핀배열, 회로
Motor driver ICs
Reversible motor driver
BA6246N / BA6247 / BA6247N / BA6247FP-Y
The BA6246N, BA6247, BA6247N and BA6247FP-Y are monolithic ICs incorporating two reversible-motor drivers. The
ICs differ in the control logic and output mode.
FFeatures
1) Two reversible-motor drivers in each unit.
2) Built-in thermal shutdown circuit.
3) Output voltage can be set arbitrarily.
4) Available in a compact SIP10pin package
(BA6246N, BA6247N) or a HSIP10pin package with
radiation fins (BA6247).
5) Available in a HSOP25pin surface-mount package
(BA6247FP-Y).
FBlock diagram
498




BA6247FP-Y pdf, 반도체, 판매, 대치품
Motor driver ICs
BA6246N / BA6247 / BA6247N / BA6247FP-Y
FOperation notes
(1) Input conditions
(1) The input threshold voltage is positively correlated
with temperature as expressed by :
VIH
T
)2.8mV / _C
VIL
T
)1.6mV / _C (Typ.)
(2) The input pins of the BA6246N are pulled up through
a resistance of about 15k(see Fig. 1). To secure the
LOW level input, the interface to these pins should have
a current-sink capability of at least 700µA
(5V / 15k2).
(3) The maximum input voltage is 6V. Make sure that the
input will not exceed this value. Also when the voltage
VCC is not applied to the IC, do not apply voltages to the
input pins.
(2) Changes in motor direction
When reversing the rotational direction of a motor, make
sure to go through the brake or open mode in-between
the opposite directions.
The duration of brake mode should be more than the
braking time, which is defined by the time required for the
potential of the LOW level output pin to become less than
the ground potential by the electromotive force gener-
ated when the mode is switched from rotation to brake.
The duration of open mode should be 1 ms or more.
(3) Due to the effects of capacitors C2XC5, the motor
that is not being driven could be momentarily driven dur-
ing mode switching. Check for this problem when design-
ing your application.
(4) It is recommendable to arrange your design so that
voltage rises at VCC1 prior to VCC2 when turning on the
power, and voltage falls at VCC1 after VCC2 when turning
off the power.
(5) Thermal shutdown circuit
When the thermal shutdown circuit is activated, the out-
puts are left OPEN. The circuit is activated when the IC
junction temperature rises above 170_C. The tempera-
ture difference between the activation and deactivation
settings is about 30_C.
(6) The quality of these products have been carefully
checked; however, use of the products with applied volt-
ages, operating temperatures, or other parameters that
exceed the absolute maximum rating given may result in
the damage of the IC and the product it is used in. If the
IC is damaged, the short mode and open modes cannot
be specified, so if the IC is to be used in applications
where parameters may exceed the absolute maximum
retings, then be sure to incorporate fuses, or other physi-
cal safety measures.
(7) Back-rush voltage
Depending on the ambient conditions, environment, or
motor characteristics, the back-rush voltage may fluctu-
ate. Be sure to confirm that the back-rush voltage will not
adversely affect the operation of the IC.
(8) Large current line
Large currents are carried by the motor power supply and
motor ground for these ICs. Therefore, the layout of the
pattern of the PC board and the constants of certain pa-
rameters for external components, such as the capacitor
between the power supply and ground, may cause this
large output current to flow back to the input pins, result-
ing in output oscillation or other malfunctions. To prevent
this, make sure that the PC board layout and external cir-
cuit constants cause no problems with the characteris-
tics of these ICs.
(9) Power dissipation
The power dissipation will fluctuate depending on the
mounting conditions of the IC and the ambient environ-
ment. Make sure to carefully check the thermal design of
the application where these ICs will be used.
(10) Power consumption
The power consumption by the IC varies widely with the
power supply voltage and the putput current. Give full
consideration to the power dissipation rating and the
thermal resistance data and transient thermal resistance
data, to provide a thermal design so that none of the rat-
ings for the IC are exceeded.
(11) ASO
Make sure that the output current and supply voltage do
not exceed the ASO values.
(12) In-rush current
There are no circuits built into these ICs that prevent in-
rush currents. Therefore, it is recommended to place a
current limiting resistor or other physical countermeasure.
(13) Factors regarding the thermal, power supply, and
motor conditions
If the potential of the output pin sways greatly and goes
below the potential of ground, the operation of the IC may
malfunction or be adversely affected. In such a case,
place a diode between the output and ground, or other
measure, to prevent this.
501

4페이지












구       성 총 6 페이지수
다운로드[ BA6247FP-Y.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
BA6247FP-Y

Reversible motor driver

ROHM Semiconductor
ROHM Semiconductor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵