Datasheet.kr   

BA6486FS 데이터시트 PDF




ROHM Semiconductor에서 제조한 전자 부품 BA6486FS은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 BA6486FS 자료 제공

부품번호 BA6486FS 기능
기능 FDD spindle motor driver
제조업체 ROHM Semiconductor
로고 ROHM Semiconductor 로고


BA6486FS 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 11 페이지수

미리보기를 사용할 수 없습니다

BA6486FS 데이터시트, 핀배열, 회로
Motor driver ICs
FDD spindle motor driver
BA6486FS
The BA6486FS is a one-chip IC designed for driving 12V FDD spindle motors. This high-performance IC employs a
3-phase, full-wave soft switching drive system, and contains a digital servo, an index amplifier, and a power save circuit.
The compactly packaged IC reduces the number of external components required.
FApplications
Floppy disk drivers
FFeatures
1) 12V supply voltage.
2) 3-phase, full-wave soft switching drive system.
3) Digital servo circuit.
4) Power save circuit.
5) Hall power supply switch.
6) Motor speed changeable.
7) Index amplifier.
FAbsolute maximum ratings (Ta = 25_C)
FRecommended operating conditions (Ta = 25_C)
544




BA6486FS pdf, 반도체, 판매, 대치품
Motor driver ICs
BA6486FS
FCircuit operation
(1) Motor drive circuit
The motor driver is based on a 3-phase, full-wave soft
switching, current drive system in which the position of
rotor is sensed by Hall elements. The total drive current
of motor is sensed by a small resistor (RNF) and regulated
through a voltage comparison. The IC consists of Hall
amplifiers, an amplitude control circuit, a driver, an error
amplifier, and current feedback ampifier (Fig. 1).
The waveforms of different steps along the signal path
from the Hall elements to the motor driver output are
shown in Fig. 2. The Hall amplifiers receive the Hall ele-
ments voltage signals as differential signals. Next, by de-
ducting the voltage signal of Hall elements 2 from the
voltage signal of Hall elements 1, current signal H1,
which has a phase 30 degrees ahead of Hall element 1,
is created. Current signals H2 and H3 are created like-
wise. The amplitude control circuit then amplifies the H1,
H2, and H3 signal according to the current feedback am-
plifier signal. Then, drive current signals are produced at
A1, A2, and A3 by applying a constant magnification fac-
tor. Because a soft switching system is employed, the
drive current has low noise and a low total current ripple.
The total drive current is controlled by the error amplifier
input voltage. The error amplifier has a voltage gain of
about –11dB (a factor of 0.28). The current feedback am
plifier regulates the total drive current, so that the error
amplifier output voltage (V1) is equal to the VRNF voltage,
which has been voltage-converted from the total drive
current through the RNF pin. If V1 exceeds the current lim-
iter voltage (Vcl), the constant voltage Vcl takes prece-
dence, and a current limit is applied at the level of Vcl / RNF.
The current feedback amplifier tends to oscillate be-
cause it receives all the feedback with a gain of 0dB. To
prevent this oscillation, connect an external capacitor to
the CNF pin for phase compensation and for reducing the
high frequency gain.
(2) Speed control circuit
The speed control circuit is a non-adjustable digital servo
system that uses a frequency locked loop (FLL). The cir-
cuit consists of an 1 / 2 frequency divider, an FG amplifier,
and a speed discriminator (Fig. 14).
An internal reference is generated from an external clock
signal input. The 1 / 2 frequency divider reduces the fre-
quency of the OSC signal. The FG amplifier amplifies the
minute voltage generated by the motor FG pattern and
produces a rectangular-shaped speed signal. The FG
amplifier gain (GFG = 42dB, typical) is determined by the
internal resistance ratio.
547

4페이지










BA6486FS 전자부품, 판매, 대치품
Motor driver ICs
BA6486FS
550

7페이지


구       성 총 11 페이지수
다운로드[ BA6486FS.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
BA6486FS

FDD spindle motor driver

ROHM Semiconductor
ROHM Semiconductor

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵