|
|
|
부품번호 | BA7042 기능 |
|
|
기능 | VCO with sensitivity adjustment function | ||
제조업체 | ROHM Semiconductor | ||
로고 | |||
전체 5 페이지수
Optical disc ICs
VCO with sensitivity adjustment
function
BA7042
The BA7042 is a monolithic IC comprising a VCO (voltage controlled oscillator) with sensitivity adjusting capabilities.
The oscillation frequency can be set with an external constant, and is controlled according to the control voltage. The
BA7042 can be used to produce high-modulation-factor FM signals by superimposing its control voltage with AC signals,
and to configure a PLL circuit just by attaching a frequency divider and a phase comparator.
FApplications
FM intercom
FM wireless microphone
FSK modem
FFeatures
1) The number of external components is minimized.
2) Internal control amplifier for the VCO.
3) Oscillation frequency can be set with an external
constant.
4) Maximum oscillation frequency of 18MHz.
5) DIP 8-pin package.
FBlock diagram
108
Optical disc ICs
BA7042
FCircuit operation
(1) Circuit configuration
The control voltage, input through pin 1, is amplified by
the control amplifier, then output to pin 7 and input to the
VCO control circuit. The oscillation frequency of the VCO
is determined by the attached capacitor and controlled
according to the control voltage. Highly modulated FM
signals can be produced by superimposing the control
voltage with AC signals.
(2) Block description
(1) Control amplifier (pin 1, pin 7, pin 8)
The differential amplifier’s positive input is pin 1, its nega-
tive input pin 8, and its output pin 7. Set the input bias volt-
age so that the pin 7 voltage is VCC / 2. The amplification
degree is determined by the external constant.
(2) VCO (pin 2, pin 3, pin 5)
The oscillator’s center frequency is set with an external
capacitor. Use the following equation to calculate oscilla-
tion frequency :
f1
C (pF)
(1.3 V7)0.15) 102 [MHz]
where C = C2)C3, V7 = pin 7 voltage
The oscillation frequency set by the capacitor is the cen-
ter frequency in the VCO’s frequency variation range.
The VCO can be given a roughly linear oscillation fre-
quency by changing its control voltage.
FOperation notes
(1) Temperature drift of the oscillator circuit can be re-
duced by configuring with a capacitor having a tempera-
ture coefficient. Temperature drift with a capacitor having
a temperature coefficient of zero is *30kHz / _C when
C = 25pF, fO = 14.3MHz, VCTL = 2.5V.
(2) The control amplifier’s frequency characteristics
depend on NF. When used as a reversing amplifier, cutoff
frequency is roughly 100kHz with a gain of 20dB. When
configuring PLL circuits, remember that loop stability is
affected by the amplifier’s frequency characteristics.
111
4페이지 | |||
구 성 | 총 5 페이지수 | ||
다운로드 | [ BA7042.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
BA7042 | VCO with sensitivity adjustment function | ROHM Semiconductor |
BA7045 | NTSC TO PAL FORMAT CONVERTER | ROHM Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |