|
|
PDF 53262 Data sheet ( Hoja de datos )
| Número de pieza | 53262 | |
| Descripción | SOLID STATE RELAY/ 400VDC- 0.5A OPTICALLY ISOLATED/ SHORT CIRCUIT PROTECTED | |
| Fabricantes | Micropac Industries | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 53262 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
53262
SOLID STATE RELAY, 400VDC- 0.5A
OPTICALLY ISOLATED, SHORT CIRCUIT PROTECTED
Mii
MICROCIRCUITS DIVISION
Features:
• SPST, Normally Open
• 1000VDC Optical Isolated Control Input
• Power MOSFET, Low On-state Resistance
• Built-in Short Circuit Protection
• Wide Operating Temperature Range
• Non-hermetic Package
Applications:
• COTS Military Applications
• Gun Turret Controls
• Motor or Solenoid Driver
• Displays/Lamps/Controls
• Industrial Automation
DESCRIPTION
The 53262 Solid State Relay (SSR) is designed for applications in environment where hermeticity is not required. Its solid
state “contact” is resistant to damage from shock and vibration. It is also immune to contact related problems
(contamination, arcing, bouncing, etc.) associated with the electromechanical relays. Functionally, the device operates as
a single-pole single-throw (SPST), normally open (1 Form A) unidirectional high-side or low-side switch. Using a 500VDC
rated N-channel MOSFET as the switching device, the 53262 SSR offers low on-state resistance for lowering the power
dissipation, which allows operation over the temperature range of –40°C to +85°C with minimal heat sinking. A built-in
current sense circuit offers short circuit protection by turning off the MOSFET switch and allowing no current flow into the
load. After the 53262 SSR tripped due to a short circuit load, the output latches in the off-state until its control input
recycles. The control input is isolated from the load circuit using an optocoupler. This isolation barrier will eliminate the
system ground loop noise of the application. The optocoupler employs a dual high efficiency LED input allowing
TTL/CMOS logic to drive the solid state relay. The SSR is actuated by applying an input forward current of 5 to 10 mA to
the LED’s. The 53262 SSR has no moving parts and is enclosed in a non-hermetic package.
ABSOLUTE MAXIMUM RATINGS (@ TC = 25°C unless otherwise specified)
Output Voltage
Continuous Output Current @ TC = 85°C
Continuous Control Input Current
Storage Temperature Range
Operating Temperature Range
Junction Temperature
Lead Solder Temperature
400 VDC
1A
20 mA
-65°C to +150°C
-40°C to +85°C
150°C
300°C for 10 s
RECOMMENDED OPERATING CONDITIONS
Parameter
Output Voltage
Continuous Output Current
Control Input Current
Operating Case Temperature
Symbol
VO (OFF)
IO (ON)
IF
TC
Min.
5
-40
Max.
400
0.5
10
85
Units
VDC
A
mA
°C
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: [email protected]
05/16/2002
Pg. 1 of 4
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet 53262.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 53262 | SOLID STATE RELAY/ 400VDC- 0.5A OPTICALLY ISOLATED/ SHORT CIRCUIT PROTECTED | Micropac Industries |
| 53266 | 50VDC - 6A HIGH TEMPERATURE SOLID STATE RELAY | Micropac Industries |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |