DataSheet.es    


PDF EL2186 Data sheet ( Hoja de datos )

Número de pieza EL2186
Descripción 250MHz/3mA Current Mode Feedback Amp w/Disable
Fabricantes Intersil Corporation 
Logotipo Intersil Corporation Logotipo



Hay una vista previa y un enlace de descarga de EL2186 (archivo pdf) en la parte inferior de esta página.


Total 14 Páginas

No Preview Available ! EL2186 Hoja de datos, Descripción, Manual

®
Data Sheet
EL2186, EL2286
September 26, 2001
FN7056
250MHz/3mA Current Mode Feedback
Amp w/Disable
The EL2186/EL2286 are single/dual
current-feedback operational
amplifiers which achieve a -3dB
bandwidth of 250MHz at a gain of +1 while consuming only
3mA of supply current per amplifier. They will operate with
dual supplies ranging from ±1.5V to ±6V, or from single
supplies ranging from +3V to +12V. The EL2186/EL2286
also include a disable/power-down feature which reduces
current consumption to 0mA while placing the amplifier
output in a high impedance state. In spite of its low supply
current, the EL2286 can output 55mA while swinging to ±4V
on ±5V supplies. The EL2186 can output 100mA with similar
output swings. These attributes make the EL2186/EL2286
excellent choices for low power and/or low voltage cable-
driver, HDSL, or RGB applications.
For Single, Dual and Quad applications without disable,
consider the EL2180 (8-Pin Single), EL2280 (8-Pin Dual) or
EL2480 (14-Pin Quad). For lower power applications where
speed is still a concern, consider the EL2170/EL2176 family
which also comes in similar Single, Dual and Quad
configurations. The EL2170/EL2176 family provides a -3dB
bandwidth of 70MHz while consuming 1mA of supply current
per amplifier.
Ordering Information
PART NUMBER
EL2186CN
EL2186CS
EL2286CN
EL2286CS
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PACKAGE
8-Pin PDIP
8-Pin SOIC
14-Pin PDIP
14-Pin SOIC
PKG. NO.
MDP0031
MDP0027
MDP0031
MDP0027
Pinouts
EL2186*
(8-PIN SO, PDIP)
TOP VIEW
Features
• Single (EL2186) and dual (EL2286) topologies
• 3mA supply current (per amplifier)
• 250MHz -3dB bandwidth
• Low cost
• Fast disable
• Powers down to 0mA
• Single- and dual-supply operation down to ±1.5V
• 0.05%/0.05° diff. gain/diff. phase into 150
• 1200V/µs slew rate
• Large output drive current:
-100mA (EL2186)
-55mA (EL2286)
• Also available without disable in single (EL2180), dual
(EL2280) and quad (EL2480)
• Lower power EL2170/EL2176 family also available
(1mA/70MHz) in single, dual and quad
Applications
• Low power/battery applications
• HDSL amplifiers
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment amplifiers
• Current to voltage converters
EL2286*
(14-PIN SO, PDIP)
TOP VIEW
*Manufactured under U.S. Patent No. 5,418,495
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.

1 page




EL2186 pdf
Typical Performance Curves
Non-Inverting Frequency
Response (Gain)
EL2186, EL2286
Non-Inverting Frequency
Response (Phase)
Frequency Response
for Various RF and RG
Inverting Frequency
Response (Gain)
Inverting Frequency
Response (Phase)
Frequency Response
for Various RL and CL
Transimpedance (ROL)
vs Frequency
PSRR and CMRR
vs Frequency
Frequency Response for
Various CIN-
5

5 Page





EL2186 arduino
EL2186, EL2286
TJMAX = TMAX + (θJA * n * PDMAX) [1]
where:
TMAX=Maximum Ambient Temperature
θJA=Thermal Resistance of the Package
n=Number of Amplifiers in the Package
PDMAX=Maximum Power Dissipation of Each Amplifier in
the Package.
Typical Application Circuits
PDMAX for each amplifier can be calculated as follows:
PDMAX = (2 * VS * ISMAX) + (VS - VOUTMAX) *
(VOUTMAX/RL) [2]
where:
VS=Supply Voltage
ISMAX=Maximum Supply Current of 1 Amplifier
VOUTMAX=Max. Output Voltage of the Application
RL=Load Resistance
LOW POWER MULTIPLEXER WITH SINGLE-ENDED TTL INPUT
11

11 Page







PáginasTotal 14 Páginas
PDF Descargar[ Datasheet EL2186.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
EL2180250MHz/3mA Current Mode Feedback AmplifiersIntersil Corporation
Intersil Corporation
EL2180C250MHz / 3mA Current Mode Feedback AmplifiersElantec Semiconductor
Elantec Semiconductor
EL2180CN250MHz/3mA Current Mode Feedback AmplifiersIntersil Corporation
Intersil Corporation
EL2180CN250MHz / 3mA Current Mode Feedback AmplifiersElantec Semiconductor
Elantec Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar