|
|
PDF EM91210C Data sheet ( Hoja de datos )
| Número de pieza | EM91210C | |
| Descripción | TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE | |
| Fabricantes | ELAN Microelectronics Corp | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EM91210C (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
|
No Preview Available !
EM9E1M2911021S0ESRERIEIESS
TONE/PULTSOENSEW/PUITLSCEHSAWBITLCEHDAIBALLE EDRIAWLEIRTWHILTHCDLCIDNITNETRERFFAACCEE
GENERAL DESCRIPTION
The EM91210 is a series of tone/pulse switchable dialers that is composed of T/P dialer and T/P dialer with
10 set memories. The EM91210 series provides necessary functions of telephone set for application in any
environment, such as Pulse dialing, Tone (DTMF) dialing, Handfree dialing, keying tone , mute and pulse mute
functions. Beside this, SDO (Serial Data Output) functions is provided in advance version that is designed to
drive LCD driver and voice synthesizer. In this application, the dialing numbers can be displayed on LCD screen
with EM32100 ( or EM32116 ).
FEATURES
• Tone/Pulse switchable.
• Wide operating voltage from 2.0 V to 5.5 V.
• Low operating current, 0.15 mA (Pulse) and 0.3 mA (Tone) typically.
• Adding resistor on keyboard scan pin that can select many telephone specifications, such as : Pulse rate,
M/B ratio, Flash time, Pause time, P-T wait time and keyboard type.
• SDO function supports LCD driver and voice synthesizer to indicate dialing numbers.
• Handfree function provides on-hook dialing and speakerphone application.
• 10-set two touch repertory memory, each one can store data up to 16 digits.
• A 32-digit LNB (last number) redial memory.
• A 32-digit SAVE redial memory.
• Keytone function provides rapidly keying recognition.
• Pulse mute function supports pulse dialing application.
• Using 3.579545 MHz crystal or ceramic resonator.
• Package forms: PDIP, skinny.
ORDERING INFORMATION
Versions list
VERSION
EM91210A
EM91210B
EM91210C
LNB KT SAVE
√√
√
√√
√
√√
√
HF SDO(LCD) PMUTE
√
√√
√√
√
* This specification are subject to be changed without notice.
10.1.1997 1
1 page  
EM91210 SERIES
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
Storing : EM91210 series support two operating methods to store numbers into SAVE redial memory.
Method 1
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function), push d1, d2, .. , dn. The numbers d1, d2, .. , dn will be dialed out in Pulse
or Tone mode as selection.
• After dn had been dialed out and push [ST], Save key. If the keying numbers are more than 32 digits that
content of SAVE memory can not be updated. Otherwise, these numbers will be stored into SAVE memory.
In the [] key allows to be omitted.
Method 2
Off-hook (or turn on HF function), push ST, d1, d2, .. , dn, [ST], Save. If the keying numbers are not over 32
digits, the numbers d1, d2, .. , dn will be stored in SAVE redial memory automatically.
Dialing :
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function), push Save key. The numbers stored in SAVE memory will be dialed out
in Pulse or Tone mode as selection.
Repertory memory
The EM91210 series incorporated several sets repertory memory and each one can store number up to 16 digits.
In memory storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored into
specific memory. Otherwise, these numbers can be stored entirely. After memory dialed out, the content of
LNB is keeping to current data.
Storing of 10 sets memory types
Indirect (two-touch) operation
Off-hook (or turn on HF function), push ST, d1, d2, .. , dn, ST, n. The numbers d1, d2, .. , dn will be stored
into memory location “n”. The “n” expressed digital key from 0 to 9.
Dialing (after memory dialed out, the content of LNB is keeping to current data)
Indirect (two-touch) of 10 sets memory
• To select Pulse or Tone mode.
• Off-hook (or Turn on HF function), push A, n key. The numbers that are stored in indirect memory location
“n” will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital key from 0 to 9.
Pause (P) key operation
The Pause (P) key is designed to support pause operation in dialing duration. “P” key can be stored in memory
and it will occupy one digital position.
* This specification are subject to be changed without notice.
10.1.1997 5
5 Page 
EM91210 SERIES
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
LNB=2,3
HKS
KEY IN
KT
XMUTE
PM
SDO
PO
DTMF
OSC.
RD
Tdb
Tkt
Tm
Tidp
T T TT
b m bm
Tidp
Figure 3. Pulse mode LNB redial timing
LNB=2,3
HKS
KEY IN
KT
RD
Tdb
XMUTE
PM
SDO
PO
DTMF
Tsdo
Td
Titp
OSC.
Td
Titp
Figure 4. DTMF mode LNB redial timing
* This specification are subject to be changed without notice.
Hi-impedance
Hi-impedance
10.1.1997 11
11 Page | ||
| Páginas | Total 19 Páginas | |
| PDF Descargar | [ Datasheet EM91210C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EM91210 | TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE | ELAN Microelectronics Corp |
| EM91210A | TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE | ELAN Microelectronics Corp |
| EM91210AP | TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE | ELAN Microelectronics Corp |
| EM91210B | TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE | ELAN Microelectronics Corp |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |