DataSheet.es    


PDF DTA143XKA Data sheet ( Hoja de datos )

Número de pieza DTA143XKA
Descripción PNP Digital transistor
Fabricantes ROHM Semiconductor 
Logotipo ROHM Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de DTA143XKA (archivo pdf) en la parte inferior de esta página.


Total 14 Páginas

No Preview Available ! DTA143XKA Hoja de datos, Descripción, Manual

DTA143X series
PNP -100mA -50V Digital Transistor (Bias Resistor Built-in Transistor)
Datasheet
Parameter
VCC
IC(MAX.)
R1
R2
Value
-50V
-100mA
4.7kΩ
10kΩ
lFeatures
1) Built-In Biasing Resistors, R1 = 4.7kΩ, R2 = 10kΩ
2) Built-in bias resistors enable the configuration of
 an inverter circuit without connecting external
 input resistors (see inner circuit) .
3) Only the on/off conditions need to be set
 for operation, making the circuit design easy.
4) Complementary NPN Types: DTC143X series
lOutline
SOT-723
 
DTA143XM
(VMT3)
SOT-416
 
DTA143XE
(EMT3)
SOT-323
SOT-416FL
 
DTA143XEB
(EMT3F)
SOT-323FL
 
DTA143XUB
(UMT3F)
SOT-346
lApplication
INVERTER, INTERFACE, DRIVER
lInner circuit
DTA143XM/ DTA143XEB/ DTA143XUB
 
DTA143XUA
(UMT3)
 
DTA143XKA
(SMT3)
DTA143XE/ DTA143XUA/ DTA143XKA
lPackaging specifications
                      
Part No.
Package
Package
size
Taping
code
Reel size Tape width
(mm) (mm)
Basic
ordering
unit.(pcs)
Marking
DTA143XM SOT-723
1212
T2L
180
8
8000
33
DTA143XEB SOT-416FL 1616
TL
180
8
3000
33
DTA143XE SOT-416
1616
TL
180
8
3000
33
DTA143XUB SOT-323FL 2021
TL
180
8
3000
33
DTA143XUA SOT-323
2021 T106
180
8
3000
33
DTA143XKA SOT-346
2928 T146
180
8
3000
33
                                                                                        
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/10
20151001 - Rev.002

1 page




DTA143XKA pdf
DTA143X series
lDimensions
      
                Datasheet
                                                                                          
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
5/10
20151001 - Rev.002

5 Page





DTA143XKA arduino
Datasheet
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU CHINA
CLASS
CLASS
CLASS
CLASSb
CLASS
CLASS
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PGA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001

11 Page







PáginasTotal 14 Páginas
PDF Descargar[ Datasheet DTA143XKA.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DTA143XKAPNP Digital transistorROHM Semiconductor
ROHM Semiconductor
DTA143XKAPNP DIGITAL TRANSISTORJIANGSU CHANGJIANG ELECTRONICS
JIANGSU CHANGJIANG ELECTRONICS
DTA143XKAPNP Digital TransistorsSeCoS
SeCoS

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar