Datasheet.kr   

DTD113ZK PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 DTD113ZK
기능 Digital transistors (built-in resistors)
제조업체 Rohm
로고 Rohm 로고 



전체 7 페이지

		

No Preview Available !

DTD113ZK 데이터시트, 핀배열, 회로
DTD113Z series
NPN 500mA 50V Digital Transistors (Bias Resistor Built-in Transistors)
Datasheet
Parameter
VCC
IC(MAX.)
R1
R2
Value
50V
500mA
1kW
10kW
lFeatures
1) Built-In Biasing Resistors
2) Built-in bias resistors enable the configuration of
an inverter circuit without connecting external
input resistors (see innner circuit).
3) The bias resistors consist of thin-film resistors
with complete isolation to allow negative biasing
of the input. They also have the advantage of
completely eliminating parasitic effects.
4) Only the on/off conditions need to be set for
operation, making the circuit design easy.
5) Complementary PNP Types :DTB113ZK
6) Lead Free/RoHS Compliant.
lApplication
Switching circuit, Inverter circuit, Interface circuit,
Driver circuit
lOutline
UMT3
OUT
IN
GND
DTD113ZU
SOT-323 (SC-70)
SMT3
OUT
IN
GND
DTD113ZK
SOT-346 (SC-59)
lInner circuit
lPackaging specifications
Part No.
Package
DTD113ZU
DTD113ZK
UMT3
SMT3
Package
size
(mm)
2021
2928
Taping
code
T106
T146
Reel size
(mm)
Tape width
(mm)
Basic
ordering
unit (pcs)
180 8 3,000
180 8 3,000
Marking
G21
G21
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
1/6
2012.07 - Rev.D




DTD113ZK pdf, 반도체, 판매, 대치품
DTD113Z series
lElectrical characteristic curves(Ta = 25°C)
Fig.5 Output voltage vs. output current
Data Sheet
OUTPUT CURRENT : IO [mA]
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
4/6
2012.07 - Rev.D

4페이지










DTD113ZK 전자부품, 판매, 대치품
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
R1120A

7페이지



구       성총 7 페이지
다운로드[ DTD113ZK.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
DTD113Z

Digital transistors (built-in resistors)

Rohm
Rohm
DTD113Z

NPN DIGITAL TRANSISTOR

UTC
UTC

DataSheet.kr    |   2019   |  연락처   |  링크모음   |   검색  |   사이트맵