Datasheet.kr   

10H20EV8-4A 데이터시트 PDF




NXP Semiconductors에서 제조한 전자 부품 10H20EV8-4A은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 10H20EV8-4A 자료 제공

부품번호 10H20EV8-4A 기능
기능 ECL programmable array logic
제조업체 NXP Semiconductors
로고 NXP Semiconductors 로고


10H20EV8-4A 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 17 페이지수

미리보기를 사용할 수 없습니다

10H20EV8-4A 데이터시트, 핀배열, 회로
Philips Semiconductors Programmable Logic Devices
ECL programmable array logic
Product specification
10H20EV8/10020EV8
DESCRIPTION
The 10H20EV8/10020EV8 is an ultra
high-speed universal ECL PAL® device.
Combining versatile output macrocells with a
standard AND/OR single programmable
array, this device is ideal in implementing a
user’s custom logic. The use of Philips
Semiconductors state-of-the-art bipolar oxide
isolation process enables the
10H20EV8/10020EV8 to achieve optimum
speed in any design. The SNAP design
software package from Philips
Semiconductors simplifies design entry
based upon Boolean or state equations.
The 10H20EV8/10020EV8 is a two-level logic
element comprised of 11 fixed inputs, an
input pin that can either be used as a clock or
12th input, 90 AND gates, and 8 Output Logic
Macrocells. Each Output Macrocell can be
individually configured as a dedicated input,
dedicated output with polarity control, a
bidirectional I/O, or as a registered output
that has both output polarity control and
feedback to the AND array. This gives the
part the capability of having up to 20 inputs
and eight outputs.
The 10H20EV8/10020EV8 has a variable
number of product terms that can be OR’d
per output. Four of the outputs have 12 AND
terms available and the other four have 8
terms per output. This allows the designer the
extra flexibility to implement those functions
that he couldn’t in a standard PAL device.
Asynchronous Preset and Reset product
terms are also included for system design
ease. Each output has a separate output
enable product term. Another feature added
for the system designer is a power-up Reset
on all registered outputs.
The 10H20EV8/10020EV8 also features the
ability to Preload the registers to any desired
state during testing. The Preload is not
affected by the pattern within the device, so
can be performed at any step in the testing
sequence. This permits full logical verification
even after the device has been patterned.
FEATURES
Ultra high speed ECL device
tPD = 4.5ns (max)
tIS = 2.6ns (max)
tCKO = 2.3ns (max)
fMAX = 208MHz
Universal ECL Programmable Array Logic
8 user programmable output macrocells
Up to 20 inputs and 8 outputs
Individual user programmable output
polarity
Variable product term distribution allows
increased design capability
Asynchronous Preset and Reset capability
10KH and 100K options
Power-up Reset and Preload function to
enhance state machine design and testing
Design support provided via SNAP and
other CAD tools
Security fuse for preventing design
duplication
Available in 24-Pin 300mil-wide DIP and
28-Pin PLCC.
PIN CONFIGURATIONS
F Package
I1 1
I2 2
CLK/I12 3
F1 4
F2 5
VCO1 6
F3 7
F4 8
I3 9
I4 10
I5 11
VEE 12
F = Ceramic DIP (300mil-wide)
24 VCC
23 I11
22 I10
21 F8
20 F7
19 VCO2
18 F6
17 F5
16 I9
15 I8
14 I7
13 I6
A Package
CLK/I12 I2 I1 NC VCC I11 I10
4 3 2 1 28 27 26
F1 5
F2 6
VCO1 7
NC 8
25 F8
24 F7
23 VCO2
22 NC
F3 9
21 F6
F4 10
20 F5
I3 11
19 I9
12 13 14 15 16 17 18
I4 I5 VEE NC I6 I7 I8
A = Plastic Leaded Chip Carrier
ORDERING INFORMATION
DESCRIPTION
24-Pin Ceramic Dual In-Line (300mil-wide)
28-Pin Plastic Leaded Chip Carrier
ORDER CODE
10H20EV8–4F
10020EV8–4F
10H20EV8–4A
10020EV8–4A
DRAWING NUMBER
0586B
0401F
®PAL is a registered trademark of Monolithic Memories, Inc., a wholly owned subsidiary of Advanced Micro Devices, Inc.
October 22, 1993
113
853–1423 11164




10H20EV8-4A pdf, 반도체, 판매, 대치품
Philips Semiconductors Programmable Logic Devices
ECL programmable array logic
Product specification
10H20EV8/10020EV8
ABSOLUTE MAXIMUM RATINGS1
SYMBOL
PARAMETER
RATING
UNIT
VEE Supply voltage
–8.0 V
VIN Input voltage (VIN should never be more negative than VEE)
0 to VEE
V
IO Output source current
–50 mA
TS Operating Temperature range
–55 to +150
°C
TJ Storage Temperature range
Ceramic Package
+165
°C
Plastic Package
+150
°C
NOTE:
1. Stresses above those listed may cause malfunction or permanent damage to the device. This is a stress rating only. Functional operation at
these or any other condition above those indicated in the operational and programming specification of the device is not implied.
DC OPERATING CONDITIONS 10H20EV8
TEST
LIMITS
SYMBOL
PARAMETER
CONDITIONS
MIN NOM MAX
UNIT
VCC, VCO1, VCO2
Circuit ground
000
V
VEE Supply voltage (negative)
–5.2 V
Tamb = 0°C
–1170
–840
mV
VIH High level input voltage
Tamb = +25°C
–1130
–810
mV
Tamb = +75°C
–1070
–735
mV
Tamb = 0°C
–1950
–1480
mV
VIL Low level input voltage
Tamb = +25°C
–1950
–1480
mV
Tamb = +75°C
–1980
–1450
mV
Tamb
Operating ambient temperature range
0 +25 +75
°C
NOTE:
When operating at other than the specified VEE voltage (–5.2V), the DC and AC Electrical Characteristics will vary slightly from specified values.
DC OPERATING CONDITIONS 10020EV8
TEST
LIMITS
SYMBOL
PARAMETER
CONDITIONS
MIN NOM MAX
UNIT
VCC, VCO1, VCO2
VEE
VEE
Circuit ground
Supply voltage
Supply voltage when opetating with the 10K
or 10KH ECL family
000
–4.8 –4.5 –4.2
–5.7
V
V
V
VEE = –4.2V
–1150
VIH High level input voltage
VEE = –4.5V
–1165
–880
mV
VEE = –4.8V
–1165
VEE = –4.2V
–1475
mV
VIL Low level input voltage
VEE = –4.5V
–1810
–1475
mV
VEE = –4.8V
–1490
mV
Tamb
Operating ambient temperature range
0 +25 +85
°C
NOTE:
When operating at other than the specified VEE voltages (–4.2V, –4.5V, –4.8V), the DC and AC Electrical Characteristics will vary slightly from
their specified values.
October 22, 1993
116

4페이지










10H20EV8-4A 전자부품, 판매, 대치품
Philips Semiconductors Programmable Logic Devices
ECL programmable array logic
Product specification
10H20EV8/10020EV8
AC ELECTRICAL CHARACTERISTICS (for Ceramic Dual In-Line Package)
10H20EV8: 0°C Tamb +75°C, VEE = –5.2V ± 5%, VCC = VCO1 = VCO2 = GND
10020EV8: 0°C Tamb +85°C, –4.8V VEE –4.2V, VCC = VCO1 = VCO2 = GND
LIMITS1
SYMBOL PARAMETER
FROM
TO
0°C
+25°C
MIN2
TYP3
MAX
2
MIN2
TYP3
MAX
2
+75°C/+85°C
MIN2
TYP3
MAX
2
UNIT
Pulse Width
tCKH
Clock High
tCKL
Clock Low
tCKP
Clock Period
tPRH
Preset/Reset Pulse
Setup and Hold Time
CLK +
CLK –
CLK +
(I, I/O) ±
CLK –
CLK +
CLK +
(I, I/O) ±
2.0
2.0
4.0
4.5
0.6
0.9
2.0 0.6
2.0 0.9
4.0
4.5 —
2.0 0.6
2.0 0.9
4.0
4.5 —
ns
ns
ns
ns
tIS
tIH
tPRS
Input
Input
Clock Resume after
Preset/Reset
(I, I/O) ±
CLK +
(I, I/O) ±
CLK +
(I, I/O) ±
CLK +
2.6
0.1
4.6
1.0
<0
1.0
2.6 1.1
0.1 < 0
4.6 0.9
2.7 1.4
0.1 < 0
4.6 0.8
ns
ns
ns
Propagation Delay
tPD Input
(I, I/O) ± I/O ±
2.85 4.7
2.95 4.7
3.35 4.7 ns
tCKO
Clock
CLK +
I/O ±
1.65 2.4
1.7 2.4
2.0 2.5 ns
tOE Output Enable
(I, I/O) ±
I/O
2.0 4.2
2.1 4.2
2.2 4.2 ns
tOD Output Disable
(I, I/O) ±
I/O
2.0 4.2
2.1 4.2
2.2 4.2 ns
tPRO
Preset/Reset
(I, I/O) ± I/O ±
2.8 4.7
3.0 4.7
3.5 4.7 ns
tPPR
Power-on Reset
VEE I/O
— 10
— 10
— 10 ns
fMAX
212 377
212 357
204 294
MHz
NOTES:
1. Refer to AC Test Circuit and Voltage Wafeforms diagrams.
2. Maximum loading conditions: 89 fuses intact per row.
3. Typical loading conditions: 15 fuses intact per row. (All “inactive” fuses, except those necessary for correct functionality, are removed.)
October 22, 1993
119

7페이지


구       성 총 17 페이지수
다운로드[ 10H20EV8-4A.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
10H20EV8-4A

ECL programmable array logic

NXP Semiconductors
NXP Semiconductors
10H20EV8-4F

ECL programmable array logic

NXP Semiconductors
NXP Semiconductors

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵