Datasheet.kr   

67023-002 데이터시트 PDF




Micropac Industries에서 제조한 전자 부품 67023-002은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 67023-002 자료 제공

부품번호 67023-002 기능
기능 HERMETIC / NUMERIC AND HEXADECIMAL DISPLAYS
제조업체 Micropac Industries
로고 Micropac Industries 로고


67023-002 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 7 페이지수

미리보기를 사용할 수 없습니다

67023-002 데이터시트, 핀배열, 회로
4N51, 4N52
67023 4N53, 4N54
HERMETIC , NUMERIC AND HEXADECIMAL
DISPLAYS
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
Conforms to MIL-PRF-87157
Three character options
Numeric, Hexidecimal or Over range
4 X 7 dot matrix character
Memory latch/decoder/driver is TTL compatible
Available in Red or Green
Categorized for luminous intensity
Applications:
High reliability systems
Instrumentation panels
Communication equipment
Medical equipment
Harsh environments
IR blocking filter available
DESCRIPTION
The 4N51-4N54 series are solid state numeric and hexidecimal displays for use in high reliability applications. The displays feature
an on-board decoder/driver and memory (except 4N53). These displays are hermetically sealed and conform to MIL-PRF-87157, the
general specification for light emitting diode displays. The character height is 7.4mm (.29”). The green LED version conforms to
MIL-D-87157 with exception of color.
The 4N51 is a numeric display which decodes positive BCD logic into the numbers “0-9”, a “-” sign, a right-hand decimal point, and a
test pattern (all LED’s on).
The 4N52 is the same as the 4N51, but the decimal point is located on the left side of the device.
The 4N53 is an over range device which displays “+1” and a right-hand decimal point. This display is typically driven using external
switching transistors.
The 4N54 is a hexidecimal display which decodes positive BCD logic into 16 characters “0-9, A-F”. An input is provided to blank the
display (all LED’s off) without losing the contents of the memory.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature..........................................................................................................................................-65°C to +125°C
Operating Free-Air Temperature Range. ...........................................................................................................-55°C to +100°C
Lead Solder Temperature (1/16” [1.6mm] below seating plane for 10s) ........................................................................... 260°C
Supply Voltage, VCC (4N51, 4N52, 4N54) ................................................................................................................. .-0.5V to 7V
Voltage Applied to Input Logic, DP and Enable Pins ............................................................................................... . -0.5V to 7V
Voltage Applied to Blanking Input (4N54 only)........................................................................................................... -0.5V to 7V
Forward Current, Each LED (4N53 only) ............................................................................................................................10mA
Reverse Voltage, Each LED (4N53 only)................................................................................................................................. 4V
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 487-6918
www.micropac.com E-MAIL: [email protected]
2-4




67023-002 pdf, 반도체, 판매, 대치품
4N51, 4N52,
67023 4N53, 4N54
HERMETIC, NUMERIC AND HEXIDECIMAL DISPLAYS
*RECOMMENDED OPERATING CONDITIONS:
PARAMETER
SYMBOL
MIN
Supply Voltage
4N51
4.5
4N52
4N53
VCC
4.5
NA
4N54
4.5
Operating Temperature
Enable Pulse Width
ALL
4N51
tA
-55
4N52
4N54
tW
100
Time data must be held before positive 4N51
transition of enable line
4N52
4N54
tSETUP
50
Time data must be held after positive 4N51
transition of enable line
4N52
4N54
tHOLD
50
Enable pulse rise time
4N51
4N52
4N54
tTLH
Forward Current
4N53
IF
5
MAX
5.5
5.5
NA
5.5
100
200
10
UNITS
V
V
NA
V
°C
ns
ns
ns
ns
m
SELECTION GUIDE
67023-001
4N51 Commercial (0° to 70°C)
67023-101
4N51 Screened to TXV level (-55° to +100°C) with 100% screening.
67023-101C 4N51 marked with DSCC P/N JM87157/00101AXX (-55° to +100°C) with 100% screening.
67023-002
4N52 Commercial (0° to 70°C)
67023-102
4N52 Screened to TXV level (-55° to +100°C) with 100% screening.
67023-102C 4N52 marked with DSCC P/N JM87157/00102AXX (-55° to +100°C) with 100% screening.
67023-003
4N53 Commercial (0° to 70°C)
67023-103
4N53 Screened to TXV level (-55° to +100°C) with 100% screening.
67023-103C 4N53 marked with DSCC P/N JM87157/00103AXX (-55° to +100°C) with 100% screening.
67023-004
4N54 Commercial (0° to 70°C)
67023-104
4N54 Screened to TXV level (-55° to +100°C) with 100% screening.
67023-104C 4N54 marked with DSCC P/N JM87157/00104AXX (-55° to +100°C) with 100% screening.
67023-034
4N54, green commercial (0° to 70°C)
67023-315
4N54, green Mil-Temp (-55° to +100°C) with 100% screening.
NOTES:
1. When ordering DSCC part numbers, you may order by the MII part number or the DSCC part number.
2. The first X at the end of M87157/0010XA[X]X designates lead finish. In place of the X use A for hot solder dip
or C for gold finish.
3. Second X at the end of the M87157/0010XAX[X] designates luminous intensity code. In place of the X use C
thru K to indicate desired intensity level.
*JEDEC Registered Data
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 487-6918
www.micropac.com E-MAIL: [email protected]
2-7

4페이지










67023-002 전자부품, 판매, 대치품
4N51, 4N52,
67023 4N53, 4N54
HERMETIC, NUMERIC AND HEXIDECIMAL DISPLAYS
TABLE III
GROUP B, CLASS A AND B OF MIL-PRF-87157
Test
MIL-PRF-750 Conditions
Sample Size
Method
Subgroup 1
Resistance to Solvents
Internal Visual and Mechanical (10)
Subgroup 2(1,2)
1022
2075
4 Devices / 0 Failures
1 Device / 0 Failures
Solderability
Subgroup 3
2026
TA = 245°C for 5 seconds
LTPD = 15
Thermal Shock (Temp. Cycle)
Moisture Resistance(3)
1051
1021
Condition B1, 15 Min. Dwell
LTPD = 15
Fine Leak
1071
Condition H
Gross Leak
Electrical / Optical Endpoints(4)
Subgroup 4
Operating Life Test (340 hrs.)(5)
1071
------
1027
Condition C
IV, ICC, IBL, IBH, IEL, IEH, IIL, IIH and
visual function. TA = 25°C
TA = 100°C, at VCC = 5.0V and
cycling through logic at 1 character
LTPD = 10
Electrical / Optical Endpoints(4)
------
per second.
Same as Subgroup 3
Subgroup 5
Non-operating (Storage) Life
Test (340 hrs.)
Electrical / Optical Endpoints(4)
1032
------
TA = 125°C
Same as Subgroup 3
LTPD = 10
TABLE IV
GROUP C, CLASS A AND B OF MIL-PRF-87157
Test
MIL-PRF-750 Conditions
Sample Size
Method
Subgroup 1
Physical Dimensions
Subgroup 2(2, 10)
2066
2 Devices / 0 Failures
LTPD = 15
Lead Integrity
2004
Condition B2
Fine Leak
1071
Condition H
Gross Leak
1071
Condition C
Subgroup 3
Shock
2016
1500G, Time = 0.5 ms, 5 blows in
LTPD = 15
Vibration, Variable Frequency
2056
each orientation X1, Y1, Z1
Constant Acceleration
External Visual(7)
Electrical / Optical Endpoints(4)
Subgroup 4(1,6)
2006
1010 or 1011
------
10,000G at Y1 orientation
IV, ICC, IBL, IBH, IEL, IEH, IIL, IIH and
visual function. TA = 25°C
Salt Atmosphere
External Visual(7)
1041
1010 or 1011
LTPD = 15
Subgroup 5
Bond Strength(8)
2037
Condition A
LTPD = 20 (c = 0)
Subgroup 6
Operating Life Test(9)
Electrical / Optical Endpoints(4)
1026
------
TA = +100°C 1000 HRS
Same as Subgroup 3
LTPD = 10
NOTES: 1. Whenever electrical/optical tests are not required as endpoints, electrical rejects may be used.
2. The LTPD applies to the number of leads inspected, except in no case shall less than 3 displays be used to provide the number of leads required.
3. Initial conditioning should be a 15” bend inward one cycle.
4. Limits and conditions are per the electrical/optical characteristics.
5. Burn-in for the over range shall use Condition B at a nominal IF = 8 mA with “+1” illuminated for t=340 hours.
6. Solderability samples shall not be used.
7. Visual requirements shall be as specified in MIL-PRF-883, Methods 1010 or 1011.
8. Displays may be selected prior to seal.
9. If a given inspection lot, undergoing Group B inspection, has been selected to satisfy the Group C inspection requirements, the 340 hour life tests may
be continued on test to 1000 hours in order to satisfy the Group C Life Test requirements. In such cases, either the 340 hour endpoint measurements
shall be made a basis for Group B lot acceptance or the 1000 hour endpoint measurement shall be used as the basis for both Group B and Group C
acceptance.
10. MIL-PRF-883 test method applies.
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E. Walnut St., Garland, TX 75040 (972) 272-3571 Fax (972) 487-6918
www.micropac.com E-MAIL: [email protected]
2 - 10

7페이지


구       성 총 7 페이지수
다운로드[ 67023-002.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
67023-001

HERMETIC / NUMERIC AND HEXADECIMAL DISPLAYS

Micropac Industries
Micropac Industries
67023-002

HERMETIC / NUMERIC AND HEXADECIMAL DISPLAYS

Micropac Industries
Micropac Industries

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵