|
|
PDF ILX718 Data sheet ( Hoja de datos )
| Número de pieza | ILX718 | |
| Descripción | 5363-pixel X 3 line CCD Linear Sensor (Color) | |
| Fabricantes | Sony Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ILX718 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
ILX718K
5363-pixel × 3 line CCD Linear Sensor (Color)
Description
The ILX718K is a reduction type CCD linear sensor
developed for color image scanner, and has shutter
function per each color. This sensor reads A4-size
documents at a density of 600 DPI.
22 pin DIP (Plastic)
Features
• Number of effective pixels: 16089 pixels
(5363 pixels × 3)
• Pixel size:
8µm × 8µm (8µm pitch)
• Distance between line: 64µm (8 Lines)
• Single-sided readout
• Shutter function
• Ultra low lag / High sensitivity
• Single 12V power supply
• Input clock pulse:
CMOS 5V drive
• Number of output
3 (R, G, B)
• Package:
22 pin Plastic-DIP (400 mil)
Block Diagram
Absolute Maximum Ratings
• Supply voltage
VDD 15
• Operating temperature
–10 to +55
• Storage temperature
–30 to +80
V
°C
°C
Pin Configuration (Top View)
VOUT-R 1
GND 2
φRS 3
φLH 4
GND 5
φ1 6
φSHUT-R 7
φ1 8
φSHUT-G 9
φROG-R 10
GND 11
22 VOUT-G
21 VOUT-B
20 VDD
19 NC
18 NC
17 φ2
16 VDD
15 φ2
14 φSHUT-B
13 φROG-B
12 φROG-G
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E96541B9X-PS
1 page  
Clock Timing Chart 2
t4
t5
ILX718K
φROG
φ1
φ2
t6
t1
t2
t7
t3
Clock Timing Chart 3
φ1
φLH
t7
φ2
t9
φRS
VOUT
t12
t6
t10 t11
t8
t13
–5–
5 Page 
ILX718K
3) Soldering
a) Make sure the package temperature does not exceed 80°C.
b) Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a grounded
30W soldering iron and solder each pin in less then 2 seconds. For repairs and remount, cool sufficiently.
c) To dismount an imaging device, do not use a solder suction equipment. When using an electric desoldering
tool, ground the controller. For the control system, use a zero cross type.
4) Dust and dirt protection
a) Operate in clean environments.
b) Do not either touch glass plates by hand or have any object come in contact with glass surfaces. Should
dirt stick to a glass surface, blow it off with an air blower. (For dirt stuck through static electricity ionized
air is recommended.)
c) Clean with a cotton bud and ethyl alcohol if the glass surface is grease stained. Be careful not to scratch
the glass.
d) Keep in a case to protect from dust and dirt. To prevent dew condensation, preheat or precool when
moving to a room with great temperature differences.
5) Exposure to high temperatures or humidity will affect the characteristics. Accordingly avoid storage or
usage in such conditions.
6) CCD image sensors are precise optical equipment that should not be subject to mechanical shocks.
– 11 –
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet ILX718.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ILX716K | 3648 X 3pixel CCD Linear Sensor (Color) | Sony Corporation |
| ILX718 | 5363-pixel X 3 line CCD Linear Sensor (Color) | Sony Corporation |
| ILX718K | 5363-pixel X 3 line CCD Linear Sensor (Color) | Sony Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |