|
|
Número de pieza | Z1SMA75 | |
Descripción | Surface mount Silicon-Zener Diodes (non-planar technology) | |
Fabricantes | Diotec Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de Z1SMA75 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! Z1 SMA 1 … Z1 SMA 100 (1 W)
Surface mount Silicon-Zener Diodes
(non-planar technology)
Flächendiffundierte Si-Zener-Dioden
für die Oberflächenmontage
5 ± 0.2
1 0.15
Type
Typ
4.6 ± 0.2
Dimensions / Maße in mm
Maximum power dissipation
Maximale Verlustleistung
1W
Nominal Z-voltage – Nominale Z-Spannung
1…100 V
Plastic case
Kunststoffgehäuse
~ SMA
~ DO-214AC
Weight approx. – Gewicht ca.
0.07 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped and reeled
Standard Lieferform gegurtet auf Rolle
see page 18
siehe Seite 18
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationa-
len Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation
Verlustleistung
TA = 50/C
Ptot
1 W 1)
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Tj – 50...+150/C
TS – 50...+175/C
RthA < 70 K/W 1)
Thermal resistance junction to terminal
Wärmewiderstand Sperrschicht – Anschluß
RthT < 30 K/W
Zener voltages see table on next page – Zener-Spannungen siehe Tabelle auf der nächsten Seite
1) Mounted on P.C. board with 25 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2) Tested with pulses – Gemessen mit Impulsen
3) The Z1SMA 1 is a diode operated in forward. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated by a white band is to be connected to the negative pole.
Die Z1SMA 1 ist eine in Durchlaß betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
“F” anstatt “Z” zu setzten. Die mit weißem Balken gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
198 28.02.2002
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet Z1SMA75.PDF ] |
Número de pieza | Descripción | Fabricantes |
Z1SMA7.5 | Surface mount Silicon-Zener Diodes (non-planar technology) | Diotec Semiconductor |
Z1SMA75 | Surface mount Silicon-Zener Diodes (non-planar technology) | Diotec Semiconductor |
Z1SMA7V5 | 1.0W Surface Mount Zener Diodes | TAITRON |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |