Datasheet.kr   

VCA7010VEA7506 데이터시트 PDF




ETC에서 제조한 전자 부품 VCA7010VEA7506은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 VCA7010VEA7506 자료 제공

부품번호 VCA7010VEA7506 기능
기능 Video Equalizing Amplifier with Clipping and Clamping
제조업체 ETC
로고 ETC 로고


VCA7010VEA7506 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 1 페이지수

미리보기를 사용할 수 없습니다

VCA7010VEA7506 데이터시트, 핀배열, 회로
Video Clipping and Clamping DAsAnalog Video GearRossGear Ross Video
85
VCA-7010Leitch Compatible
VEA-7506GVG Compatible
Video Equalizing Amplifier with Clipping and Clamping
For use where clamping and white clipping is required in addition
to precision cable equalization.
The basic amplifier equalizes Belden 8281 cable but several versions for other cable types
are available at no extra charge.
The back porch clamping speed is adjustable. Fast mode offers excellent hum rejection
(>45 dB) while Normal mode provides good hum rejection (>33 dB) with superior immunity
to noise.
An adjustable white clipper is included to limit peak white signal excursions and protect the
following equipment from overload. Two clipping modes are available. Flat mode causes all
frequencies to be clipped equally. Luminance Only mode avoids clipping chroma. The clipper
is of an advanced design which maintains excellent signal linearity to within 1.5% of the
clipping point.
A differential input provides excellent rejection of input ground loop interference.
Temperature drift effects are almost non-existent due to the use of the latest in analog
ASICs combined with meticulous product engineering.
INPUT
GAIN
+/- 3 dB
0-500 FT
500-1000 FT
BACK
PORCH
CLAMP
EQUALIZER
EQ
FLAT
LUM ONLY
WHITE
CLIP
CLIP
OUTPUTS
1
2
3
4
5
6
6
8
7
8
• Precision equalization of up to
305m (1,000 ft.) of coax cable
• 8 outputs (6 output mode
selectable on the VEA-7506)
• Versions available for many
popular cable types
• White Clipper with hard and
soft modes
• Back porch clamping with
2 speeds
• Delay adjustable +/- 2 degrees
• Delay matched for precise
interchangeability
• Differential input with excellent
common-mode rejection
• Excellent isolation between
outputs
• Power to each card is
individually fused
• Superb technical specifications
• 5-year transferable warranty
• VCA-7010 is an alternative to
the Leitch VDP-683-CLP
• VCA-7010 fits Ross 7000 series
and Leitch 680 series frames
• VEA-7506 is an alternative
to the GVG 8506
• VEA-7506 fits Ross 7500 series
and GVG 8500/8800/8900 series
frames
2004 / 2005 RossGear and GearLite Terminal Equipment Catalog
Ross is a trademark of Ross Video Limited. Leitch is a trademark of Leitch Technology Corporation. GVG is a trademark of Thomson Multimedia.





구       성 총 1 페이지수
다운로드[ VCA7010VEA7506.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
VCA7010VEA7506

Video Equalizing Amplifier with Clipping and Clamping

ETC
ETC

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵