|
|
PDF TND017MP Data sheet ( Hoja de datos )
| Número de pieza | TND017MP | |
| Descripción | Lowside Power Switch Lamp/ Solenoid/ and Motor-Driving Applications | |
| Fabricantes | Sanyo Semicon Device | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TND017MP (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number:ENN6481A
ExPD (Excellent Power Device)
TND017MP, TND017SW
Lowside Power Switch
Lamp, Solenoid, and Motor-Driving Applications
Features
· N-channel MOSFET built in.
· Overheat protection.
· Overcurrent protection.
(Self recovery type current
limiting function)
· Overvoltage protection.
· TND017SW incorporates two
sets of circuit.
Package Dimensions
Unit:mm
2145
[TND017MP]
6.0
5.0 4.7
0.5
0.6
0.5
123
1.45 1.45
0.5
1 : GND
2 : OUT
3 : IN
SANYO : MP
Package Dimensions
Unit:mm
2181
[TND017SW]
85
1
5.0
4
0.595 1.27 0.43
0.2
1 : GND1
2 : IN1
3 : GND2
4 : IN2
5 : OUT2
6 : OUT2
7 : OUT1
8 : OUT1
SANYO : SOP8
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Drain-to-Source Voltage
Output Current
Input Voltage
Allowable Power Dissipation
Operating Supply Voltage
Operating Temperature
Junction Temperature
Storage Temperature
Symbol
VDS
IO(DC)
VIN
PD
VDS(opr)
Topr
Tj
Tstg
Conditions
TND017MP
TND017SW
Mounted on a ceramic board (1200mm2×0.8mm) 1unit
TND017SW
Mounted on a ceramic board (1200mm2×0.8mm)
Ratings
60
1.5
–0.3 to +10
1.0
Unit
V
A
V
W
1.7 W
2.0
40
–40 to +85
Internally Limited
–55 to +150
W
V
˚C
˚C
˚C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
12501TS TA-3183/42000TS (KOTO) TA-2832 No.6481–1/5
1 page  
TND017MP, 017SW
Operation Description
· The output power MOSFET will be turned on when the input voltage exceeds the input threshold voltage (4 to 6V
is recommended), and then the lamp will be turned on by the current flowing to the lamp. Conversely, the output
power MOSFET will be turned off when the input voltage goes below the input threshold voltage, and then the
lamp will be turned off.
· The inrush current that occurs during normal lamp operation is limited to a preset value by the built-in overcurrent
protecting circuit, which makes the lamp life longer.
· The internal overcurrent protection function limits the current of output power MOSFET when output current of at
least the overcurrent detecting current value flows at load short. Besides, if the device temperature exceeds the
allowable power dissipation, overheat protection function protects the power switch from being broken down by
shutting down the MOSFET when Tj comes to 150˚C (typical).
· Shutdown state will be kept after overheat protection operation and the system will be reset when the input voltage
goes to or below the reset voltage (1V).
· As an example of application circuit, DC voltage can also be controlled as a solenoid drive.
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of January, 2001. Specifications and information herein are subject
to change without notice.
PS No.6481–5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet TND017MP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TND017MP | Lowside Power Switch Lamp/ Solenoid/ and Motor-Driving Applications | Sanyo Semicon Device |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |