|
|
Número de pieza | RPM7236-HX | |
Descripción | IR Receiver Module | |
Fabricantes | ROHM Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RPM7236-HX (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! Photo Link Module
IR Receiver Module
RPM7236-Hx series
RPM7236-Hx series
RPM7236-Hx series are remote control receiver module. Small-sized, light-weight, and low voltage operated (from 2.7V)
modules have been achieved by using resin mold.
zApplications
All household electric appliances such as TV, DVD, air conditioner and audio equipment
zFeatures
1) Low voltage operation. (VCC=2.7 to 3.6V)
2) Low current consumption. (ICC=0.3mA, VCC=3V)
3) Superior anti VCC noise characteristics.
4) 5 types of holders available to each set.
zRPM7236-Hx series
Sub carrier
frequency
Hight of lens
36.0kHz
RSIP-A3 (H4)
15.9mm
RPM7236-H4
TOP VIEW
RSIP-A3 (H8)
7.2mm
RPM7236-H8
RSIP-A3 (H9)
12.0mm
RPM7236-H9
SIDE VIEW
RSIP-A3 (H5)
RSIP-A3 (H13)
9.6mm
15.0mm
RPM7236-H5
RPM7236-H13
zAbsolute maximum ratings (Ta=25°C)
Parameter
Symbol
Supply voltage
VCC
Output current
IO
Storage temperature
Tstg
Limits
6.3
2.0
−30 to +100
Unit
V
mA
°C
zRecommended operating conditions (Ta=25°C)
Parameter
Symbol Min. Typ.
Supply voltage
VCC 2.7 3.0
Operating temperature
Topr −10 25
Max.
3.6
75
Unit
V
°C
Rev.A
1/6
1 page Photo Link Module
RPM7236-Hx series
(4) If transmission signal has non-continues carrier, error might be occurred. Continuous carrier is necessary.
T1 T1≠T2
T2
(5) The receiver was designed to use as in-door use only.
Therefore, please understand that the receiver cannot cover all characteristics, in case of using it out-door.
(6) Noise environment (Light noise from inverter Lamp, and other kind of Lamps, Power ripple, electromagnetic noise from
power circuit, and etc) may cause a reduced effective distance.
(7) The receiver may not work properly if the receiving signal judgment is done by single pulse due to the surrounding /
environmental noises.
To prevent such misjudgment, please make sure that the receiver is set up to work only when receiving series of
the coded signal.
(8) Emitting unit (remote control transmitter) has to be considered about its emitting device function, characteristics and
characteristics of the receiver.
(9) Attach holder on PCB pattern.
(Holder do not conduct to GND)
(10) Do not supply unnecessary stress to lead and holder.
(11) Please pay attention to the lens carefully.
It might have a chance to miss-function when the lens get dust or dirty.
Also, please do not touch the lens.
(12) In order to protect the products from ESD, human body, solder iron and etc. are required to be grounded.
Rev.A
5/6
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet RPM7236-HX.PDF ] |
Número de pieza | Descripción | Fabricantes |
RPM7236-HX | IR Receiver Module | ROHM Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |