|
|
|
부품번호 | RGR2622-DN 기능 |
|
|
기능 | Fiber Optic Light to Logic Receiver with Clock Recovery | ||
제조업체 | Agilent(Hewlett-Packard) | ||
로고 | |||
Fiber Optic “Light to Logic”
Receiver with Clock Recovery
Preliminary Technical Data
RGR2622
Features
• Light to Logic 20-Pin DIP
Receiver Offers ECL
Compatibility
• Sensitivity:
–31 dBm
• Phase-Locked Loop (PLL)
Timing Recovery Circuit
• Meets All SONET Jitter
Requirements
(CCITT G.958)
• Single +5 V Supply,
Typically <1.00 W
• SONET/SDH Compliant
Applications
• Telecommunication
Networks
• SONET OC12 and SDH
STM4 Compatible
• Local and Metropolitan Area
Networks
• ATM Single Mode Public
Network
• Military Communications
and Control Systems
• Digital Cable TV Networks
Description
The RGR2622 receiver provides
optical signal conversion and
processing. It converts 1200 nm
to 1600 nm wavelength lightwave
information into an electrical
signal at data rates of 622 Mb/s.
Each receiver contains an InGaAs
PIN photodiode, a high sensitiv-
ity, wide dynamic range transim-
pedance amplifier, capacitively
coupled to a PLL based clock
recovery circuit. The clock and
data outputs are retimed
complementary PECL.
A complementary CMOS
compatible low light alarm is also
provided.
Preliminary Product Disclaimer
This preliminary data sheet is provided to assist you in the evaluation of engineering samples of the product which is under development.
Until Hewlett-Packard releases this product for general sales, HP reserves the right to alter prices, specifications, features, capabilities,
function, manufacturing release dates, and even general availability of the product at any time.
406 (5/97)
Performance Specifications
Absolute Maximum Ratings
Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided that
each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that
limiting values of more than one parameter can be applied to the product at the same time.
Parameter
Supply Voltage
Supply Voltage
Symbol
VCC
VNEG
Minimum
–0.5
–10
Maximum
+5.5
+0.5
Units
V
V
Note
1
1
Environmental Parameters
Parameter
Operating Temperature
Storage Temperature
Humidity
Symbol
-
-
-
Minimum
–40
–40
-
Maximum
+85
+85
85
Units
°C
°C
%RH
Note
-
-
-
Electrical Parameters (–40°C to +85°C)
Parameter
Supply Voltage
VCC Supply Current
DATA Output Level (high)
DATA Output Level (low)
ALARM Output Level (high)
ALARM Output Level (low)
Symbol
VCC
-
-
-
V off
V on
Minimum
4.75
-
3.8
3.1
4.5
0
Maximum
5.25
250
4.15
3.5
5.0
0.5
Notes:
1. On an RGR2622 VCC of –0.5 V and VNEG of +0.5 V may not be applied simultaneously.
2. Output terminated to (VCC -2) with 50 Ω load or equivalent.
3. Output voltages are for VCC = 5.0 V.
4. Outputs not loaded.
Units
V
mA
V
V
V
V
Note
-
4
2, 3
2, 3
3
3
409
4페이지 | |||
구 성 | 총 6 페이지수 | ||
다운로드 | [ RGR2622-DN.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
RGR2622-DN | Fiber Optic Light to Logic Receiver with Clock Recovery | Agilent(Hewlett-Packard) |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |