RCV1551-FP Datasheet PDF - Agilent(Hewlett-Packard)
| Part Number | RCV1551-FP | |
| Description | Fiber Optic Light to Logic Receiver | |
| Manufacturers | Agilent(Hewlett-Packard) | |
| Logo | .gif "Agilent(Hewlett-Packard)"){kind=logo} |
|
|
There is a preview and RCV1551-FP download ( pdf file ) link at the bottom of this page. Total 6 Pages | ||
Preview 1 page No Preview Available !
Fiber Optic “Light to Logic”
Receiver
Preliminary Technical Data
RCV1551
Features
• Light to Logic 20-pin DIP
Receiver Offers ECL
Compatibility
• Long Reach, High
Performance
• Sensitivity -35 dBm
• Single +5 V Supply
• SONET/SDH Compliant
• Multisourced
Applications
• Telecommunication
Networks
• SONET OC3 and SDH STM1
Compatible
• Local and Metropolitan Area
Networks
• ATM Single Mode Public
Network
• Military Communications
and Control Systems
Performance
• Digital Cable TV Networks
Description
The RCV1551 receiver provides
optical signal conversion and
processing. It contains an InGaAs
PIN photodiode and high
sensitivity, wide dynamic range,
transimpedance amplifier,
capacitively coupled to limiting
amplifier stages with PECL
output drivers. Also provided is a
loss of signal alarm.
The planar PIN photodiode
operates throughout the 1200 nm
to 1600 nm wavelength band. A
CMOS wide dynamic range
transimpedance amplifier
optimized for 155 MBd operation
provides low noise front end gain
for the RCV1551.
A low pass filter maximizes the
signal to noise ratio while
minimizing intersymbol
interference. The interface
amplifier provides signal
conversion and buffering for the
PECL complementary data
outputs. A complementary PECL
alarm output is also provided.
The receiver operates from +5 V
and -5.2 V or +5 V and Ground
power supplies. A 50/125 micron
multimode fiber pigtail is
included, assuring compatibility
with multimode and single mode
fiber optic systems.
Preliminary Product Disclaimer
This preliminary data sheet is provided to assist you in the evaluation of engineering samples of the product which is under development
and targeted for release during 1997. Until Hewlett-Packard releases this product for general sales, HP reserves the right to alter prices,
specifications, features, capabilities, function, manufacturing release dates, and even general availability of the product at any time.
418 (5/97)
|
| |
 
Optical Parameters (-40°C to +85°C)
Parameter
Wavelength
Receiver Sensitivity
Maximum Input Power
Alarm ON
Hysteresis
Alarm Response Time
Reliability Target
Minimum
1200
-
0
-45
0.5
-
-
Maximum
1600
-35
-
-36
7.0
600
1000
Units
nm
dBm
dBm
dBm
dB
µS
FIT
Note:
1. At a BER of 1 x 10-10, 223-1 PRBS pattern NRZ data at the line rate with 10:1 extinction ratio. EOL.
Note
-
1
-
-
-
-
-
Fiber Pigtail
Core Diameter
Cladding Diameter
Secondary Coating Diameter
Typical
50
125
900
Units
microns
microns
microns
Drawing Dimensions
L
20 11
C
1
BA
10
J
K
422
H
DIM.
MIN.
NOM.
A 32.9 –
B 9.9 –
C 16.0 –
D––
E 2.26 –
F – 2.54
∅G – 0.46
H 2.7 –
J 5.2 –
K – 10.16
L 400 –
ALL DIMENSIONS IN MILLIMETERS
MAX.
33.1
10.1
16.3
9.27
2.62
–
–
3.2
5.6
–
1220
∅G
F
D
E
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for RCV1551-FP electronic component. |
| Information | Total 6 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ RCV1551-FP.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| RCV1551-FP | The function is Fiber Optic Light to Logic Receiver. Agilent(Hewlett-Packard) | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
RCV1
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||