|
|
PDF PC900V0NSZX Data sheet ( Hoja de datos )
| Número de pieza | PC900V0NSZX | |
| Descripción | DEVICE SPECIFICATION FOR PHOTOCOUPLER | |
| Fabricantes | Sharp Electrionic Components | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PC900V0NSZX (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
PREPARED BY:
DATE:
SHAR
ELECTRONIC COMPONENTS
GROUP SHARP CORPORATION
SPECIFICATION
I OPTO-ELECTRONIC
-+D=E%VAIn
f DEVICE SPECIFICATION FOR
PHOTOCOUPLER
I MODEL No.
PCSOOV
(Businessdealingname:
PC9OOVONSZXl
1. These specification sheets include materfals protected under copyright of Sharp Corporation (“Sharp”).
Please do not reproduce or cause anyone to reproduce them without Sharp’s consent.
-
2. When using this product, please observe the absolute maximum ratings and the instructions for use outlIned
in these specification sheets, as well as the precautions mentioned below. Sharp assumes no responsibility
for any damage resulting from use of the product which does not comply with the absolute maximum ratings
and the instructions included in these specification sheets, and the precautions menttoned below.
(Precautions)
(1) This product is designed for use in the following application areas ;
l OA equipment * Audio visual equipment
- Telecommunication equipment (Terminal)
i * Tooling machines - Computers
* Home appliances
* Measuring equipment
1
If the use of the product in the above application areas is for equipment listed in paragraphs
(2) or (3). please be sure to observe the precautions gtven in those respective paragraphs.
(2) Appropriate measures, such as fail-safe design and redundant design considering
the safety design of the overall system and equipment, should be taken to ensure reliability
and safety when this product is used for equipment which demands high reliability and
safety in function and precision, such as ;
* Transportation control and safety equipment (aircraft, train. automobile
- Traffic sigmk
* Gas leakage sensor breakers * Rescue and security
[ * Other safety equipment
etc.)
equipment
I
[3) Please do not use this product for equipment which require extremely high reliability
and safety in function and precision, such as :
* Space equipment * Telecommunication equipment (for trunk lines)
[ l Nuclear power control equipment
* Medical equipment
1
(4) Please contact and consult with a Sharp sales representative if there are any questions
regarding interpretation of the above three paragraphs.
3. Please contact and consult with a Sharp sales representative for any questions about this product.
CUSTOMER’S APPROVAL
DATE
BY
DATE
PRESENTED
BY
F J-p.
J
/G&‘&&h
IJ, ,+a-3
K. Hachimura,
Department General Manager
Engineering Dept. .I1
Opto-Electronic
Devices Div.
ELECOM Group
SHARP CORPORATION
of
1 page  
SHARP CORPORflTION
Ratings and characteristics
3.1 Absolute maximum ratings
*l The derating factors of absolute maximum ratings due to ambient temperature
are shown in Fig. 1, 2. 3.
*2 Pulse widths 100 ps, Dutyratio : 0.001
*3 AC for 1 min, 40 to 6O%RH
*4 ForlOs
5 Page 
SHflRP CORPORATION
Precautions for Photocouplers
1 For cleaning
(1) Solvent cleaning : Solvent temperature 45% or less
Immersion for 3 min or less
(2) Ultrasonic
cleaning
: The effect to device by ultrasonic cleaning differs
by cleaning bath size, ultrasonic power
output, cleaning time, PCB size or device mounting
condition etc. Please test it in actual using condition
and con&n that doesn’t occur any defect before starting
the ultrasonic cleaning.
(3) Applicable solvent : Ethyl alcohol, Methyl alcohol, Isopropyl alcohol
In case when the other solvent is used. there are cases that
the packaging resin is eroded. Please use the other solvent
after thorough coniirmation is performed in actual using condition.
2. Please use the same as normal integration circuit about static
electricity in order that this device is OPIC photocoupler.
3. In order to stabilize power supply line. we recommend to connect
a by-pass capacitor of 0.0 1p F or more between Vcc and GND near the device.
4. The detector which is used in this device, has parasitic diode between each pins and GND.
There are cases that miss operation or destruction possibly may be occurred if electric
potential of any pin becomes below GND level even for instant.
Therefore it shall be recommended to design the circuit that electric potential of
any pin does not become below GND level.
5. The LED used in the Photocoupler generally decreases the light emission power
by operation. In case of long operation time, please design the circuit with considering
the decreases of the light emission power of the LED. (500/6/5years)
Please decide the input current which become 2 times of MAX. I,,,
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet PC900V0NSZX.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PC900V0NSZX | DEVICE SPECIFICATION FOR PHOTOCOUPLER | Sharp Electrionic Components |
| PC900V0NSZXF | Photocoupler |  Sharp |
| PC900V0NSZXF | Photocoupler | Sharp |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |