Datasheet.kr   

IDTQS3861 데이터시트 PDF




Integrated Device에서 제조한 전자 부품 IDTQS3861은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 IDTQS3861 자료 제공

부품번호 IDTQS3861 기능
기능 The QS3861 provides a set of ten high-speed CMOS TTL-compatible bus switches.
제조업체 Integrated Device
로고 Integrated Device 로고


IDTQS3861 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 5 페이지수

미리보기를 사용할 수 없습니다

IDTQS3861 데이터시트, 핀배열, 회로
IDTQS3861
HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT
QUICKSWITCH® PRODUCTS
HIGH-SPEED CMOS 10-BIT
BUS SWITCH WITH
FLOW-THROUGH PINOUT
INDUSTRIALTEMPERATURERANGE
IDTQS3861
FEATURES:
• Enhanced N channel FET with no inherent diode to Vcc
• 5bidirectional switches connect inputs to outputs
• Zero propagation delay, zero ground bounce
• Undershoot clamp diodes on all switch and control inputs
• Available in SOIC, QSOP, and TSSOP packages
DESCRIPTION:
The QS3861 provides a set of ten high-speed CMOS TTL-compatible
bus switches. The low ON resistance (5) of the QS3861 allows inputs to
be connected without adding propagation delay and without generating
additional ground bounce noise. The Bus Enable (BE) signal turns the
switches on.
The QS3861 is characterized for operation at -40°C to +85°C.
APPLICATIONS:
• Hot-swapping, hot-docking
• Voltage translation (5V to 3.3V)
• Power Conservation
• Capacitance reduction and isloation
• Bus Isolation
• Clock Gating
FUNCTIONAL BLOCK DIAGRAM
A0
A9
BE
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
c 2000 Integrated Device Technology, Inc.
1
B0
B9
DECEMBER 2000
DSC-5767/1




IDTQS3861 pdf, 반도체, 판매, 대치품
IDTQS3861
HIGH-SPEED CMOS 10-BIT BUS SWITCH WITH FLOW-THROUGH PINOUT
INDUSTRIALTEMPERATURERANGE
POWER SUPPLY CHARACTERISTICS
Symbol
Parameter
Test Conditions(1)
ICCQ Quiescent Power Supply Current
VCC = Max., VIN = GND or VCC, f = 0
ICC Power Supply Current per Input HIGH(3)
VCC = Max., VIN = 3.4V, f = 0
ICCD Dynamic Power Supply Current per MHz(4) VCC = Max., A and B Pins Open,
BE Input Toggling @ 50% Duty Cycle
Typ.(2)
0.2
Max. Unit
3 µA
2.5 mA
0.25 mA/MHz
NOTES:
1. For conditions shown as Min. or Max., use the appropriate values specified under DC Electrical Characteristics.
2. Typical values are at VCC = 5V and TA = 25°C.
3. Per TTL-driven input (VIN = 3.4V, control inputs only). A and B pins do not contribute to Icc.
3. This current applies to the control inputs only and represents the current required to switch internal capacitance at the specified frequency. The A and B inputs generate no significant
AC or DC currents as they transition. This parameter is guaranteed but not production tested.
SWITCHING CHARACTERISTICS OVER OPERATING RANGE
TA = -40°C to +85°C, VCC = 5V ± 5%
CLOAD = 50pF, RLOAD = 500unless otherwise noted.
Symbol
tPLH
tPHL
tPZL
tPZH
tPLZ
tPHZ
Parameter
Data Propagation Delay(2)
A to B, B to A
Switch Turn-On Delay
BE to A or B
Switch Turn-Off Delay(2)
BE to A or B
Min. (1)
1.5
1.5
Typ.
Max.
0.25(3)
6.5
5.5
Unit
ns
ns
ns
NOTES:
1. Minimums are guaranteed but not production tested.
2. This parameter is guaranteed but not production tested.
3. The bus switch contributes no propagation delay other than the RC delay of the ON resistance of the switch and the load capacitance. The time constant for the switch alone
is of the order of 0.25ns at CL = 50pF. Since this time constant is much smaller than the rise and fall times of typical driving signals, it adds very little propagation delay to the
system. Propagation delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on
the driven side.
4

4페이지












구       성 총 5 페이지수
다운로드[ IDTQS3861.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
IDTQS3861

The QS3861 provides a set of ten high-speed CMOS TTL-compatible bus switches.

Integrated Device
Integrated Device
IDTQS3861PA

The QS3861 provides a set of ten high-speed CMOS TTL-compatible bus switches.

Integrated Device
Integrated Device

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵