Datasheet.kr   

IL388DAA 데이터시트 PDF




Vishay Siliconix에서 제조한 전자 부품 IL388DAA은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 IL388DAA 자료 제공

부품번호 IL388DAA 기능
기능 Linear Optocoupler/ PCMCIA package
제조업체 Vishay Siliconix
로고 Vishay Siliconix 로고


IL388DAA 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

IL388DAA 데이터시트, 핀배열, 회로
VISHAY
Linear Optocoupler, PCMCIA package
IL388DAA
Vishay Semiconductors
Features
• 2.3 mm High SMD package
• High sensitivity (K1) at low operating LED current
• Couples AC and DC signals
• Low input-output capacitance
• Isolation test voltage, 2500 VRMS
• Low distortion, below - 80 db (typical)
• 0.4 mm internal insulation thickness
K 1 K2 8 C2
A 2 7 B2
B1 3
C1 4
K1
6 N.C
5 N.C
Agency Approvals
• CSA 93751
Applications
Optical DAA for V.90 FAX/Modem
PCMCIA cards
Digital telephone line isolation
Description
The IL388DAA Linear Optocoupler consist of an
IRLED optically coupled to two photodiodes. The
emitter is located such that both photodiodes receive
approximately an equal amount of infrared light. The
diodes produce a proportional amount of photocur-
rent. The ratio of the photocurrent stays constant with
high accuracy when either the LED current or the
ambient temperature changes. Thus one can control
the output diode current optically by controlling the
input photodiode current.
i179085
The IL388DAA is designed to be part of the DAA2000
kit which consists of one DL207DAA, one
DM207DAA, and two IL388DAAs.
The DL207DAA and DM207DAA ICs provide the driv-
ers and receivers for the IL388DAA as well as all
other telephone termination functions.
Order Information
Part Remarks
IL388DAA
Couples AC and DC signals, SMD-8
For additional information on the available options refer to
Option Information.
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is
not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
Maximum Rating for extended periods of the time can adversely affect reliability.
Input
Parameter
Reverse voltage
Forward current
Surge current pulse width < 10 µs
Power dissipation
Derate linearly from 25 °C
Junction temperature
Test condition
Symbol
VR
IF
IPK
Pdiss
Tj
Value
3.0
30
150
150
2.0
100
Unit
V
mA
mA
mW
mW/°C
°C
Document Number 83723
Rev. 1.3, 26-Apr-04
www.vishay.com
1




IL388DAA pdf, 반도체, 판매, 대치품
IL388DAA
Vishay Semiconductors
VISHAY
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the
use of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
www.vishay.com
4
Document Number 83723
Rev. 1.3, 26-Apr-04

4페이지












구       성 총 4 페이지수
다운로드[ IL388DAA.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
IL388DAA

Linear Optocoupler/ PCMCIA package

Vishay Siliconix
Vishay Siliconix

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵