Datasheet.kr   

UPA1727 데이터시트 PDF




NEC에서 제조한 전자 부품 UPA1727은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 UPA1727 자료 제공

부품번호 UPA1727 기능
기능 SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE
제조업체 NEC
로고 NEC 로고


UPA1727 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 4 페이지수

미리보기를 사용할 수 없습니다

UPA1727 데이터시트, 핀배열, 회로
DATA SHEET
MOS FIELD EFFECT TRANSISTOR
µPA1727
SWITCHING
N-CHANNEL POWER MOS FET
INDUSTRIAL USE
DESCRIPTION
The µPA1727 is N-Channel MOS Field Effect Transistor
designed for high current switching applications.
FEATURES
Single chip type
Low On-state Resistance
5 RDS(on)1 = 14 m(TYP.) (VGS = 10 V, ID = 5.0 A)
5 RDS(on)2 = 17 m(TYP.) (VGS = 4.5 V, ID = 5.0 A)
5 RDS(on)3 = 19 m(TYP.) (VGS = 4.0 V, ID = 5.0 A)
5 Low Ciss : Ciss = 2400 pF (TYP.)
Built-in G-S protection diode
Small and surface mount package (Power SOP8)
ORDERING INFORMATION
PART NUMBER
PACKAGE
µPA1727
Power SOP8
PACKAGE DRAWING (Unit : mm)
85
1, 2, 3 ; Source
4 ; Gate
5, 6, 7, 8 ; Drain
14
5.37 Max.
6.0 ±0.3
4.4
1.27 0.78 Max.
0.40
+0.10
–0.05
0.12 M
0.5 ±0.2
0.8
0.10
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, All terminals are connected.)
Drain to Source Voltage (VGS = 0 V)
VDSS 60 V
Gate to Source Voltage (VDS = 0 V)
VGSS ±20 V
Drain Current (DC)
ID(DC)
±10
A
Drain Current (Pulse) Note1
ID(pulse)
±40
A
Total Power Dissipation (TA = 25 °C) Note2
PT
2.0 W
Channel Temperature
Tch 150 °C
Storage Temperature
Single Avalanche Current Note3
5 Single Avalanche Energy Note3
Tstg –55 to + 150 °C
IAS 10 A
EAS 200 mJ
EQUIVALENT CIRCUIT
Drain
Gate
Body
Diode
Gate
Protection
Diode
Source
Notes 1. PW 10 µs, Duty cycle 1 %
5 2. Mounted on ceramic substrate of 1200 mm2 x 2.2 mm
3. Starting Tch = 25 °C, RG = 25 Ω, VGS = 20 V 0 V
Remark
The diode connected between the gate and source of the transistor serves as a protector against ESD.
When this device actually used, an additional protection circuit is externally required if a voltage
Exceeding the rated voltage may be applied to this device.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. G14330EJ1V0DS00 (1st edition)
Date Published January 2000 NS CP(K)
Printed in Japan
The mark 5 shows major revised points.
©
1999,2000




UPA1727 pdf, 반도체, 판매, 대치품
µPA1727
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property
rights of third parties by or arising from use of a device described herein or any other liability arising from use
of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of NEC Corporation or others.
Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a
customer designated "quality assurance program" for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
M7 98. 8

4페이지












구       성 총 4 페이지수
다운로드[ UPA1727.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
UPA1720

SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE

NEC
NEC
UPA1721

SWITCHING N-CHANNEL POWER MOS FET INDUSTRIAL USE

NEC
NEC

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵