|
|
|
부품번호 | ZMY68 기능 |
|
|
기능 | Surface mount Silicon-Zener Diodes (non-planar technology) | ||
제조업체 | Diotec Semiconductor | ||
로고 | |||
전체 2 페이지수
ZMY 1…ZMY 200 (1.3 W)
Surface mount Silicon-Zener Diodes
(non-planar technology)
Flächendiffundierte Si-Zener-Dioden
für die Oberflächenmontage
Version 2004-05-13
Maximum power dissipation
Maximale Verlustleistung
1.3 W
Nominal Z-voltage – Nominale Z-Spannung
1…200 V
Plastic case MELF
Kunststoffgehäuse MELF
Weight approx. – Gewicht ca.
DO-213AB
0.12 g
Dimensions / Maße in mm
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped and reeled
Standard Lieferform gegurtet auf Rolle
see page 18
siehe Seite 18
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der internationalen
Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf Anfrage.
Advantages of non-planar Zener-Diodes:
Improved clamping capability
Increased max. zener current IZmax
Chips produced with Plasma-EPOS technology
Molded plastic over passivated junction
Vorteile der flächendiffundierten Zener-Dioden:
Hohe Impulsfestigkeit
Hoher max. Arbeitsstrom IZmax
Chips hergestellt in Plasma-EPOS-Technologie
Passivierte Chips im Plastik-Gehäuse
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation – Verlustleistung
TA = 50°C
Non repetitive peak power dissipation, t < 10 ms
Einmalige Impuls-Verlustleistung, t < 10 ms
TA = 25°C
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Thermal resistance junction to terminal
Wärmewiderstand Sperrschicht – Kontaktfläche
Ptot
PZSM
1.3 W 1)
40 W
Tj – 50...+150°C
TS – 50...+175°C
RthA < 45 K/W 1)
RthT < 10 K/W
1) Mounted on P.C. board with 50 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 50 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2) Tested with pulses – Gemessen mit Impulsen
3) The ZMY 1 is a diode operated in forward. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated by a white ring is to be connected to the negative pole.
Die ZMY 1 ist eine in Durchlaß betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
“F” anstatt “Z” zu setzten. Die durch den weißen Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
210
| |||
구 성 | 총 2 페이지수 | ||
다운로드 | [ ZMY68.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
ZMY6.2 | Zener Diode ( Rectifier ) | General Semiconductor |
ZMY6.2 | SILICON PLANAR POWER ZENER DIODES | Semtech Corporation |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |