|
|
Número de pieza | ZMY91G | |
Descripción | Surface mount Silicon-Zener Diodes (planar technology) | |
Fabricantes | Diotec Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de ZMY91G (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! ZMY 1 G … ZMY 100 G (1.0 W)
Surface mount Silicon-Zener Diodes
(planar technology)
Planare Si-Zener-Dioden
für die Oberflächenmontage
Version 2004-05-13
Maximum power dissipation
Maximale Verlustleistung
1.0 W
Nominal Z-voltage – Nominale Z-Spannung
1…100 V
Glass case MELF
Glasgehäuse MELF
Weight approx. – Gewicht ca.
DO-213AB
0.12 g
Dimensions / Maße in mm
Standard packaging taped and reeled
Standard Lieferform gegurtet auf Rolle
see page 18
siehe Seite 18
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Zener-Spannung ist in der Standard-Ausführung gestuft nach der
internationalen Reihe E 24 (~5%). Andere Toleranzen oder höhere Arbeitsspannungen auf
Anfrage.
Advantages of planar Zener-Diodes:
Low junction capacity
Low leakage current IR
Vorteile der planaren Zener-Dioden:
Niedrige Sperrschichtkapazität
Niedriger Sperrstrom IR
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation – Verlustleistung
TA = 25°C
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
Ptot 1.0 W 1)
Tj – 50...+175°C
TS – 50...+175°C
RthA < 150 K/W 1)
1) Mounted on P.C. board with 50 mm2 copper pads at each terminal
Montage auf Leiterplatte mit 50 mm2 Kupferbelag (Lötpad) an jedem Anschluß
2) Tested with pulses – Gemessen mit Impulsen
3) The ZMY 1 G is a diode operated in forward. Hence, the index of all parameters should be “F” instead of “Z”.
The cathode, indicated by a white ring is to be connected to the negative pole.
Die ZMY 1 G ist eine in Durchlaß betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index
“F” anstatt “Z” zu setzten. Die durch den weißen Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
1
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet ZMY91G.PDF ] |
Número de pieza | Descripción | Fabricantes |
ZMY91 | Zener Diode ( Rectifier ) | General Semiconductor |
ZMY91 | SILICON PLANAR POWER ZENER DIODES | GOOD-ARK Electronics |
ZMY91 | SILICON PLANAR POWER ZENER DIODES | Semtech Corporation |
ZMY91 | Surface mount Silicon-Zener Diodes (non-planar technology) | Diotec Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |