Datasheet.kr   

MTV212M64I 데이터시트 PDF




ETC에서 제조한 전자 부품 MTV212M64I은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 MTV212M64I 자료 제공

부품번호 MTV212M64I 기능
기능 8051 Embedded Monitor Controller Flash Type with ISP
제조업체 ETC
로고 ETC 로고


MTV212M64I 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 26 페이지수

미리보기를 사용할 수 없습니다

MTV212M64I 데이터시트, 핀배열, 회로
MYSON
TECHNOLOGY
MTV212M64i
(Rev 0.9)
8051 Embedded Monitor Controller
Flash Type with ISP
FEATURES
8051 core, 12MHz operating frequency.
1024-byte RAM; 64K-byte program Flash-ROM support In System Programming(ISP).
Maximum 14 channels of 5V open-drain PWM DAC.
Maximum 32 bi-directional I/O pins.
SYNC processor for composite separation/insertion, H/V polarity/frequency check, polarity adjustment
and programmable clamp pulse output.
Built-in self-test pattern generator with four free-running timings.
Built-in low power reset circuit.
Compliant with VESA DDC1/2B/2Bi/2B+ standard.
Dual slave IIC addresses.
Single master IIC interface for internal device communication.
4-channel 6-bit ADC.
Watchdog timer with programmable intervals.
40-pin DIP, 42-pin SDIP or 44-pin PLCC package.
GENERAL DESCRIPTIONS
The MTV212M64i micro-controller is an 8051 CPU core embedded device especially tailored to Monitor
applications. It includes an 8051 CPU core, 1024-byte SRAM, SYNC processor, 14 built-in PWM DACs,
VESA DDC interface, 4-channel A/D converter and a 64K-byte internal program Flash-ROM.
BLOCK DIAGRAM
P1.0-7
P2.0-2,P2.4-7
P3.2-0
P3.4-5
P0.0-
7
RD
WR
ALE
INT1
RST 8051
X1
X2
P0.0-
7
RD
WR
ALE
INT1
XFR
AD0-2 ADC
H/VSYNC
CONTROL
STOUT
HBLANK
VBLANK
HSYNC
VSYNC
HCLAMP
HALFV
HALFH
14 CHANNEL
PWM DAC
DDC & IIC
INTERFACE
ISCL
ISDA
HSCL
HSDA
This datasheet contains new product information. Myson Technology reserves the rights to modify the product specification without
notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product.
Revision 0.9
-1-
2000/11/16




MTV212M64I pdf, 반도체, 판매, 대치품
MYSON
TECHNOLOGY
MTV212M64i
(Rev 0.9)
PIN CONFIGURATION
A “CMOS output pin” means it can sink and drive at least 4mA current. It’s not recommended to use such pin
as input function.
A “5V open drain pin” means it can sink at least 4mA current but only drive 10~20uA to VDD. It can be used
as input or output function and needs an external pull up resistor.
A “8051 standard pin” is a pseudo open drain pin. It can sink at least 4mA current when output is at low level,
and drive at least 4mA current for 160nS when output transits from low to high, then keeps driving at 100uA
to maintain the pin at high level. It can be used as input or output function. It needs an external pull up
resistor when driving heavy load devices.
Output
Data
2 OSC
period
delay
Output
Data
4mA
10uA
4mA
Input
Data
120uA
Pin
8051 Standard Pin
4mA
CMOS Output Pin
Pin
4mA
Input
Data
Output
Data
No Current
5V Open Drain Pin
Pin
4mA
Revision 0.9
- 4 - 2000/11/17

4페이지










MTV212M64I 전자부품, 판매, 대치품
MYSON
TECHNOLOGY
MTV212M64i
(Rev 0.9)
=0
HLFHE = 1
=0
HCLPE = 1
=0
P42E = 1
=0
P41E = 1
=0
P40E = 1
=0
COP17 = 1
=0
COP16 = 1
=0
COP15 = 1
=0
COP14 = 1
=0
COP13 = 1
=0
COP12 = 1
=0
COP11 = 1
=0
COP10 = 1
=0
COP27 = 1
=0
COP26 = 1
=0
COP25 = 1
=0
COP24 = 1
=0
COP23 = 1
=0
COP22 = 1
=0
COP21 = 1
=0
COP20 = 1
=0
COP56 = 1
=0
COP55 = 1
=0
COP54 = 1
=0
COP53 = 1
=0
Pin “DA9/HALFV” is DA9.
Pin “DA8/HALFH” is HSYNC half frequency output.
Pin “DA8/HALFH” is DA8.
Pin “DA7/HCLAMP” is HSYNC clamp pulse output.
Pin “DA7/HCLAMP” is DA7.
Pin “STOUT/P4.2” is P4.2.
Pin “STOUT/P4.2” is STOUT.
Pin “HBLANK/P4.1” is P4.1.
Pin “HBLANK/P4.1” is HBLANK.
Pin “VBLANK/P4.0” is P4.0.
Pin “VBLANK/P4.0” is VBLANK.
Pin “P1.7” is CMOS Output.
Pin “P1.7” is 8051 standard I/O.
Pin “P1.6” is CMOS Output.
Pin “P1.6” is 8051 standard I/O.
Pin “P1.5” is CMOS Output.
Pin “P1.5” is 8051 standard I/O.
Pin “P1.4” is CMOS Output.
Pin “P1.4” is 8051 standard I/O.
Pin “P1.3” is CMOS Output.
Pin “P1.3” is 8051 standard I/O.
Pin “P1.2” is CMOS Output.
Pin “P1.2” is 8051 standard I/O.
Pin “P1.1” is CMOS Output.
Pin “P1.1” is 8051 standard I/O.
Pin “P1.0” is CMOS Output.
Pin “P1.0” is 8051 standard I/O.
Pin “P2.7/DA13” is CMOS data Output.
Pin “P2.7/DA13” is 8051 standard I/O or CMOS PWM DAC Output.
Pin “P2.6/DA12” is CMOS data Output.
Pin “P2.6/DA12” is 8051 standard I/O or CMOS PWM DAC Output.
Pin “P2.5/DA11” is CMOS data Output.
Pin “P2.5/DA11” is 8051 standard I/O or CMOS PWM DAC Output.
Pin “P2.4/DA10” is CMOS data Output.
Pin “P2.4/DA10” is 8051 standard I/O or CMOS PWM DAC Output.
Pin “P2.3/AD3” is CMOS data Output.
Pin “P2.3/AD3” is 8051 standard I/O or ADC Input.
Pin “P2.2/AD2” is CMOS data Output.
Pin “P2.2/AD2” is 8051 standard I/O or ADC Input.
Pin “P2.1/AD1” is CMOS data Output.
Pin “P2.1/AD1” is 8051 standard I/O or ADC Input.
Pin “P2.0/AD0” is CMOS data Output.
Pin “P2.0/AD0” is 8051 standard I/O or ADC Input.
Pin “DA6/P5.6” is CMOS data Output.
Pin “DA6/P5.6” is open drain I/O or CMOS PWM DAC.
Pin “DA5/P5.5” is CMOS data Output.
Pin “DA5/P5.5” is open drain I/O or CMOS PWM DAC.
Pin “DA4/P5.4” is CMOS data Output.
Pin “DA4/P5.4” is open drain I/O or CMOS PWM DAC.
Pin “DA3/P5.3” is CMOS data Output.
Pin “DA3/P5.3” is open drain I/O or CMOS PWM DAC.
Revision 0.9
- 7 - 2000/11/17

7페이지


구       성 총 26 페이지수
다운로드[ MTV212M64I.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
MTV212M64

8051 Embedded Monitor Controller MTP Type

Myson
Myson
MTV212M64I

8051 Embedded Monitor Controller Flash Type with ISP

ETC
ETC

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵