|
|
|
부품번호 | 74LCX162374MTD 기능 |
|
|
기능 | Low Voltage 16-Bit D-Type Flip-Flop with 5V Tolerant Inputs and Outputs and 26 Series Resistors | ||
제조업체 | Fairchild Semiconductor | ||
로고 | |||
전체 10 페이지수
February 2001
Revised August 2001
74LCX162374
Low Voltage 16-Bit D-Type Flip-Flop
with 5V Tolerant Inputs and Outputs
and 26Ω Series Resistors
General Description
The LCX162374 contains sixteen non-inverting D-type
flip-flops with 3-STATE outputs and is intended for bus ori-
ented applications. The device is byte controlled. A buff-
ered clock (CP) and Output Enable (OE) are common to
each byte and can be shorted together for full 16-bit opera-
tion.
The LCX162374 is designed for low voltage (2.5V or 3.3V)
VCC applications with capability of interfacing to a 5V signal
environment. The 26Ω series resistor in the output helps
reduce output overshoot and undershoot.
The LCX162374 is fabricated with an advanced CMOS
technology to achieve high speed operation while maintain-
ing CMOS low power dissipation.
Features
I 5V tolerant inputs and outputs
I 2.3V–3.6V VCC specifications provided
I Equivalent 26Ω series resistor on outputs
I 7.0 ns tPD max (VCC = 3.3V), 20 µA ICC max
I Power down high impedance inputs and outputs
I Supports live insertion/withdrawal (Note 1)
I ±12 mA output drive (VCC = 3.0V)
I Implements patented noise/EMI reduction circuitry
I Latch-up performance exceeds 500 mA
I ESD performance:
Human body model > 2000V
Machine model > 200V
I Also packaged in plastic Fine-Pitch Ball Grid Array
(FBGA) (Preliminary)
Note 1: To ensure the high-impedance state during power up or down, OE
should be tied to VCC through a pull-up resistor: the minimum value or the
resistor is determined by the current-sourcing capability of the driver.
Ordering Code:
Order Number Package Number
Package Description
74LCX162374GX
(Note 2)
BGA54A
54-Ball Fine-Pitch Ball Grid Array (FBGA), JEDEC MO-205, 5.5mm Wide
(Preliminary) [TAPE and REEL]
74LCX162374MEA
(Note 3)
MS48A
48-Lead Small Shrink Outline Package (SSOP), JEDEC MO-118, 0.300" Wide
74LCX162374MTD
(Note 3)
MTD48
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Note 2: BGA package available in Tape and Reel only.
Note 3: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbol
© 2001 Fairchild Semiconductor Corporation DS500442
www.fairchildsemi.com
Absolute Maximum Ratings(Note 4)
Symbol
Parameter
VCC Supply Voltage
VI DC Input Voltage
VO DC Output Voltage
IIK DC Input Diode Current
IOK DC Output Diode Current
IO
ICC
IGND
TSTG
DC Output Source/Sink Current
DC Supply Current per Supply Pin
DC Ground Current per Ground Pin
Storage Temperature
Value
−0.5 to +7.0
−0.5 to +7.0
−0.5 to +7.0
−0.5 to VCC + 0.5
−50
−50
+50
±50
±100
±100
−65 to +150
Conditions
3-STATE
Output in HIGH or LOW State (Note 5)
VI < GND
VO < GND
VO > VCC
Units
V
V
V
mA
mA
mA
mA
mA
°C
Recommended Operating Conditions (Note 6)
Symbol
Parameter
Min Max Units
VCC Supply Voltage
Operating
Data Retention
2.0
1.5
3.6
3.6
V
VI Input Voltage
VO Output Voltage
HIGH or LOW State
3-STATE
0
0
0
5.5
VCC
5.5
V
V
IOH/IOL Output Current
VCC = 3.0V − 3.6V
±12
VCC = 2.7V − 3.0V
±8 mA
VCC = 2.3V − 2.7V
±4
TA Free-Air Operating Temperature
−40 85
°C
∆t/∆V
Input Edge Rate, VIN = 0.8V–2.0V, VCC = 3.0V
0 10 ns/V
Note 4: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated
at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recom-
mended Operating Conditions” table will define the conditions for actual device operation.
Note 5: IO Absolute Maximum Rating must be observed.
Note 6: Floating or unused control inputs must be HIGH or LOW.
DC Electrical Characteristics
Symbol
Parameter
VIH HIGH Level Input Voltage
VIL LOW Level Input Voltage
VOH HIGH Level Output Voltage
VOL LOW Level Output Voltage
II Input Leakage Current
IOZ 3-STATE Output Leakage
Conditions
IOH = −100 µA
IOH = −4 mA
IOH = −4 mA
IOH = −6 mA
IOH = −8 mA
IOH = −12 mA
IOL = 100 µA
IOL = 4 mA
IOL = 4 mA
IOL = 6 mA
IOL = 8 mA
IOL = 12 mA
0 ≤ VI ≤ 5.5V
0 ≤ VO ≤ 5.5V
VI = VIH or VIL
VCC
(V)
2.3 − 2.7
2.7 − 3.6
2.3 − 2.7
2.7 − 3.6
2.3 − 3.6
2.3
2.7
3.0
2.7
3.0
2.3 − 3.6
2.3
2.7
3.0
2.7
3.0
2.3 − 3.6
TA = −40°C to +85°C
Min Max
1.7
2.0
0.7
0.8
VCC − 0.2
1.8
2.2
2.4
2.0
2.0
0.2
0.6
0.4
0.55
0.6
0.8
±5.0
2.3 − 3.6
±5.0
Units
V
V
V
V
µA
µA
www.fairchildsemi.com
4
4페이지 Schematic Diagram Generic for LCX Family
7 www.fairchildsemi.com
7페이지 | |||
구 성 | 총 10 페이지수 | ||
다운로드 | [ 74LCX162374MTD.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
74LCX162374MTD | Low Voltage 16-Bit D-Type Flip-Flop with 5V Tolerant Inputs and Outputs and 26 Series Resistors | Fairchild Semiconductor |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |