|
|
PDF 74LVC1G06 Data sheet ( Hoja de datos )
| Número de pieza | 74LVC1G06 | |
| Descripción | Inverter with open-drain output | |
| Fabricantes | Philips | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74LVC1G06 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
DATA SHEET
74LVC1G06
Inverter with open-drain output
Product specification
Supersedes data of 2000 Nov 21
File under Integrated Circuits, IC24
2001 Apr 05
1 page  
Philips Semiconductors
Inverter with open-drain output
Product specification
74LVC1G06
DC CHARACTERISTICS
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
TEST CONDITIONS
Tamb (°C)
SYMBOL
PARAMETER
OTHER
VCC (V)
−40 to +85
MIN. TYP.(1) MAX.
UNIT
VIH HIGH-level input voltage
1.65 to 1.95 VCC − −
2.3 to 2.7 1.7
−−
2.7 to 3.6 2.0
−−
V
V
V
VIL LOW-level input voltage
4.5 to 5.5 0.7 × VCC
1.65 to 1.95 −
2.3 to 2.7 −
−
−
−
−
GND
0.7
V
V
V
2.7 to 3.6 −
− 0.8 V
4.5 to 5.5 −
VOL LOW-level output
voltage
VI = VIH or VIL;
IO = 100 µA
1.65 to 5.5 −
VI = VIH or VIL;
IO = 4 mA
1.65 −
VI = VIH or VIL;
IO = 8 mA
2.3 −
VI = VIH or VIL;
IO = 12 mA
2.7 −
VI = VIH or VIL;
IO = 24 mA
3.0 −
VI = VIH or VIL;
IO = 32 mA
4.5 −
IIL
input leakage current VI = 5.5 V or GND
3.6
−
IOZ 3-state output OFF-state VI = VIH or VIL;
3.6
current
VO = 5.5 V or GND
−
Ioff
power OFF leakage
VI or VO = 5.5 V
current
0
−
− 0.3 × VCC V
− 0.2 V
− 0.45 V
− 0.3 V
− 0.4 V
− 0.55 V
− 0.55 V
±0.1 ±5
±0.1 ±10
µA
µA
±0.1 ±10
µA
ICC quiescent supply current VI = VCC or GND; IO = 0 5.5
−
0.1 10
µA
Note
1. All typical values are measured at VCC = 3.3 V and Tamb = 25 °C.
2001 Apr 05
5
5 Page 
Philips Semiconductors
Inverter with open-drain output
Product specification
74LVC1G06
DATA SHEET STATUS
DATA SHEET STATUS(1)
PRODUCT
STATUS(2)
Objective data
Development
Preliminary data
Qualification
Product data
Production
DEFINITIONS
This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Changes will be
communicated according to the Customer Product/Process Change
Notification (CPCN) procedure SNW-SQ-650A.
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
the use of any of these products, conveys no licence or title
under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
2001 Apr 05
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet 74LVC1G06.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74LVC1G00 | Single 2-input NAND gate | Philips |
| 74LVC1G00 | SINGLE 2 INPUT POSITIVE NAND GATE |  Diodes |
| 74LVC1G02 | Single 2-input NOR gate | Philips |
| 74LVC1G02 | SINGLE 2 INPUT POSITIVE NOR GATE | Diodes |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |