Datasheet.kr   

TDA1023T 데이터시트 PDF




NXP Semiconductors에서 제조한 전자 부품 TDA1023T은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 TDA1023T 자료 제공

부품번호 TDA1023T 기능
기능 Proportional-control triac triggering circuit
제조업체 NXP Semiconductors
로고 NXP Semiconductors 로고


TDA1023T 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 19 페이지수

미리보기를 사용할 수 없습니다

TDA1023T 데이터시트, 핀배열, 회로
INTEGRATED CIRCUITS
DATA SHEET
TDA1023/T
Proportional-control triac triggering
circuit
Product specification
Supersedes data of August 1982
File under Integrated Circuits, IC02
May 1991




TDA1023T pdf, 반도체, 판매, 대치품
Philips Semiconductors
Proportional-control triac triggering circuit
Product specification
TDA1023/T
FUNCTIONAL DESCRIPTION
The TDA1023 generates pulses to trigger a triac. These
pulses coincide with the zero excursions of the mains
voltage, thus minimizing RF interference and mains supply
transients. In order to gate the load on and off, the trigger
pulses occur in bursts thus further reducing mains supply
pollution. The average power in the load is varied by
modifying the duration of the trigger pulse burst in
accordance with the voltage difference between the
control input CI and the reference input, either UR or BR.
Power supply: VCC, RX and Vz (pins 14, 16 and 11)
The TDA1023 is supplied from the AC mains via a resistor
RD to the RX connection (pin 16); the VEE connection (pin
13) is linked to the neutral line (see Fig.4a). A smoothing
capacitor CS should be coupled between the VCC and VEE
connections.
A rectifier diode is included between the RX and VCC
connections whilst the DC supply voltage is limited by a
chain of stabilizer diodes between the RX and VEE
connections (see Fig.3).
A stabilized reference voltage (VZ) is available at pin 11 to
power an external temperature sensing bridge.
Supply operation
During the positive mains half-cycles the current through
the external voltage dropping resistor RD charges the
external smoothing capacitor CS until RX attains the
stabilizing potential of the internal stabilizing diodes. RD
should be selected to be capable of supplying the current
ICC for the TDA1023, the average output current I3(AV),
recharge the smoothing capacitor CS and provide the
supply for an external temperature bridge. (see Figs 9 to
12). Any excess current is by-passed by the internal
stabilizer diodes. The maximum rated supply current,
however, must not be exceeded.
During the negative mains half-cycles external smoothing
capacitor CS supplies the sum of the current demand
described above. Its capacitance must be sufficiently high
to maintain the supply voltage above the specified
minimum.
Dissipation in resistor RD is halved by connecting a diode
in series (see Fig.4b and 9 to 12). A further reduction in
dissipation is possible by using a high quality dropping
capacitor CD in series with a resistor RSD (see Figs 4c and
14). Protection of the TDA1023 and the triac against
mains-borne transients can be provided by connecting a
suitable VDR across the mains input.
Control and reference inputs CI, BR and UR
(pins 6, 9 and 7)
For the control of room temperature (5 °C to 30 °C)
optimum performance is obtained by using the translation
circuit. The buffered reference input BR (pin 9) is used as
a reference input whilst the output reference buffer QR (pin
8) is connected to the unbuffered reference input UR
(pin 7). This ensures that the range of room temperature is
encompassed in most of the rotation of the potentiometer
to give a linear temperature scale with accurate setting.
Should the translation circuit not be required, the
unbuffered reference input UR (pin 7) is used as a
reference input. The buffered reference input BR (pin 9)
must then be connected to the reference supply output VZ
(pin 11).
For proportional power control the unbuffered reference
input UR (pin 7) must be connected to the firing burst
repetition time control input TB (pin 12).The buffered
reference input BR (pin 9), which is in this instance
inactive, must then be connected to the reference supply
output VZ (pin 11).
Proportional range control input PR (pin 5)
The output duty factor changes from 0% to 100% by a
variation of 80 mV at the control input CI (pin 6) with the
proportional range control input PR open. For temperature
control this corresponds to a temperature difference of 1 K.
By connecting the proportional range control input PR
(pin 5) to ground the range may be increased to 400 mV,
i.e. 5 K. Intermediate values may be obtained by
connecting the PR input to ground via a resistor R5
(see Table 1).
Hysteresis control input HYS (pin 4)
With the hysteresis control input HYS (pin 4) open, the
device has a built-in hysteresis of 20 mV. For temperature
control this corresponds with 0.25 K.
Hysteresis is increased to 320 mV, corresponding to 4 K,
by grounding HYS (pin 4). Intermediate values are
obtained by connecting pin 4 via resistor R4 to ground.
Table 1 provides a set of values for R4 and R5 giving a
fixed ratio between hysteresis and proportional range.
May 1991
4

4페이지










TDA1023T 전자부품, 판매, 대치품
Philips Semiconductors
Proportional-control triac triggering circuit
Product specification
TDA1023/T
Table 1 Adjustment of proportional range and hysteresis. Combinations of resistor values giving
hysteresis > 14 proportional range.
Proportional range
Proportional range resistor
Minimum hysteresis
Maximum hysteresis resistor
R5 R4
mV
kmV
k
80
open
20
open
160
3.3 40
9.1
240
1.1 60
4.3
320
0.43 80
2.7
400 0 100 1.8
Table 2 Timing capacitor values CT
Effective DC value
Marked AC specification
Catalogue number(1)
µF µF V
68 47 25
47 33 40
33 22 25
22 15 40
15 10 25
10 6.8 40
Note
1. Special electrolytic capacitors recommended for use with the TDA1023.
2222 016 90129
- - 90131
- 015 90102
- - 90101
- - 90099
- - 90098
handbook, halfpage
RX
16
14 VCC
STABILIZER 11 VZ
13
VEE
MBA483
Fig.3 Internal supply connections.
May 1991
7

7페이지


구       성 총 19 페이지수
다운로드[ TDA1023T.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
TDA1023

Proportional-control triac triggering circuit

Philips
Philips
TDA1023

Proportional-control triac triggering circuit

NXP Semiconductors
NXP Semiconductors

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵