|
|
PDF AQY221N3VY Data sheet ( Hoja de datos )
| Número de pieza | AQY221N3VY | |
| Descripción | PhotoMOS RELAYS | |
| Fabricantes | Matsushita Electric Works(Nais) | |
| Logotipo | .gif "Matsushita Electric Works(Nais)"){kind=logo} |
|
Hay una vista previa y un enlace de descarga de AQY221N3VY (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
RF (Radio Frequency)
C ✕ R 5 SSOP Type
(by)
UL CSA
pending pending
PhotoMOS
RELAYS
FEATURES
TYPICAL APPLICATIONS
4.45
.175
1.80
.071
2.65
.104
1. Reduced package size
Lower surface has been reduced 60%
and mounting space 40% compared to
conventional 4-pin SOP type.
Measuring and testing equipment
1. Test equipment
IC tester, Liquid crystal driver tester,
semiconductor performance tester
mm inch
2. Lower output capacitance and on-
2. Board tester
resistance
Bear board tester, In-circuit tester,
Output capacitance(C): 1.0pF (typ.)
function tester
1
4 ON resistance(R): 5.5Ω (typ.)
3. Medical equipment
3. Mounting space has been reduced
Ultrasonic wave diagnostic machine
2
3
and output signals have been
4. Multi-point recorder
improved by using new flat lead
Warping, thermo couple
terminals.
Conventional
SOP type
SSOP
Flat lead
4. High speed switching
Turn on time: 0.02ms
Turn off time: 0.02ms
TYPES
Circuit
arrangement
Type
Output rating*
Tape and reel packing style
Load voltage Load current Picked from the 1/4-pin side Picked from the 2/3-pin side
Packing quantity
in tape and reel
1 Form A AC/DC type
25 V
150 mA
AQY221N3VY
AQY221N3VW
3,500 pcs.
* Indicate the peak AC and DC values.
Notes: (1)Tape package is the standard packing style.
(2)For space reasons, the initial letters of the product number “AQY and V”, the package type indicator “Y” and “W” are omitted from the seal.
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
Symbol
AQY221N3V
LED forward current
IF 50mA
Input
LED reverse voltage
Peak forward current
VR
IFP
5V
1A
Power dissipation
Pin 75mW
Load voltage (peak AC)
VL
25V
Output
Continuous load current (peak AC)
Peak load current
IL
Ipeak
0.15A
0.4A
Power dissipation
Pout 250mW
Total power dissipation
PT 300mW
I/O isolation voltage
Viso 1,500V AC
Temperature Operating
limits
Storage
Topr –40°C to +85°C –40°F to +185°F
Tstg –40°C to +100°C –40°F to +212°F
Remarks
f=100 Hz, Duty factor=0.1%
Peak AC,DC
100 ms (1 shot), VL= DC
Non-condensing at low temperatures
PhotoMOS Relays RF C✕R5 SSOP
ASCT1B268E ’03.3
http://www.naisrelay.com/
New
1
1 page  
CAUTIONS FOR USE
1. Short across terminals
Do not short circuit between terminals
when relay is energized. There is
possibility of breaking the internal IC.
2. Surge voltages at the input
If reverse surge voltages are present at
the input terminals, connect a diode in
reverse parallel across the input terminals
and keep the reverse voltages below the
reverse breakdown voltage.
14
23
5. Output spike voltages
1) If an inductive load generates spike
voltages which exceed the absolute
maximum rating, the spike voltage must
be limited.
Typical circuits are shown below.
14
Load
23
Add a clamp diode
to the load
14
3. Recommended LED forward current
(IF)
It is recommended that the LED forward
current (IF) be kept at 5mA.
4. Ripple in the input power supply
If ripple is present in the input power
supply, observe the following:
1) For LED operate current at Emin, main-
tain the value mentioned in the table of "3.
Recommended LED forward current (IF)."
2) Keep the LED operate current at 50
mA or less at Emax.
Load
23
Add a CR snubber
circuit to the load
2) If spike voltages generated at the load
are limited with a clamp diode and the
circuit wires are long, spike voltages will
occur by inductance.
Keep wires as short as possible to
minimize inductance.
AQY221N3V
6. Cleaning solvents compatibility
Dip cleaning with an organic solvent is
recommended for removal of solder flux,
dust, etc. Select a cleaning solvent from
the following table. If ultrasonic cleaning is
used, the severity of factors such as
frequency, output power and cleaning
solvent selected may cause loose wires
and other defects. Make sure these
conditions are correct before use. For
details, please consult us.
Cleaning solvent
Compatibility
(❍: Yes ✕: No)
Chlorine • Trichlene
base
• Chloroethlene
❍
• Indusco
Adueous • Hollis
• Lonco Terg
❍
Alcohol • IPA
base
• Ethanol
❍
Others
• Thinner
• Gasoline
✕
Emin.
Emax.
7. Soldering
When soldering this terminals, the following conditions are recommended.
(1) IR (Infrared reflow) soldering method (2) Vapor phase soldering method
T3
T2
T2
T1
T1
(3) Double wave soldering method
T2
T1
t1 t2
T1 = 155 to 165°C 311 to 329°F
T2 = 180°C 200°C 356 to 392°F
T3 = 245°C 473°F or less
t1 = 120 s or less
t2 = 30 s or less
(4) Soldering iron method
Tip temperature: 280 to 300°C
536 to 572°F
Wattage: 30 to 60 W
Soldering time: within 5 s
t1 t2
T1 = 180 to 200°C 366 to 392°F
T2 = 215°C 419°F or less
t1 = 40 s
t2 = 40 s or less
t1 t2 t3
T1 = 155 to 165°C 311 to 329°F
T2 = 260°C 500°F or less
t1 = 60 s or less
t2+t3 = 5 s or less
(5) Others
Check mounting conditions before using
other soldering methods (hot-air, hot
plate, pulse heater, etc.)
• The temperature profile indicates the
temperature of the soldered terminal on
the surface of the PC board. The ambient
temperature may increase excessively.
Check the temperature under mounting
conditions.
• The conditions for the infrared reflow
soldering apply when preheating using
the VPS method.
5
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet AQY221N3VY.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AQY221N3V | PhotoMOS RELAYS | Matsushita Electric Works(Nais) |
| AQY221N3V | PhotoMOS Relays |  Panasonic |
| AQY221N3VW | PhotoMOS RELAYS | Matsushita Electric Works(Nais) |
| AQY221N3VW | PhotoMOS Relays | Panasonic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |