|
|
Datasheet IC1HA-68RD-1.27SFA Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | IC1HA-68RD-1.27SFA | PC Card Socket Connector Complies with PC card Standard PC Card Socket Connector Complies with PC card Standard
IC1 Series sFeatures
1. Compliant with PC Card Standards
Polarized entry prevents wrong insertion into a corresponding connector. And sequential contact engagement prevents electorostatic discharge,avoiding possible damage to sensitive board ci |  Hirose | connector |
IC1 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | IC1000 | Data/Clock Extraction IC RF Monolithics data | | |
| 2 | IC1003 | RF Uart • • • • •
IC1003
Provides RF Uart Functions, 12 Bit Symbols to Serial TX And Serial RX to 12 bit Symbols with Start Symbol Detection Supports data rates from 100Kbps to 1Mbps Allows unsquelched receiver operation for improved sensitiviy Compatible with RFM’s TR-Series ASH transceivers
 RF Monolithics Inc data | | |
| 3 | IC1003 | RF Uart • • • • •
IC1003
Provides RF Uart Functions, 12 Bit Symbols to Serial TX And Serial RX to 12 bit Symbols with Start Symbol Detection Supports data rates from 100Kbps to 1Mbps Allows unsquelched receiver operation for improved sensitiviy Compatible with RFM’s TR-Series ASH transceivers
RF Monolithics data | | |
| 4 | IC11S-BD-EJL | Single Slot SMT Connectors For Card-Bus Based PC Cards Single Slot SMT Connectors For Card-Bus Based PC Cards
IC11S Series PC Card Standard Compliant
Reduced height : 5.6mm high
sFeatures
1. PC Card Standard compliant:
• Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a g Hirose connector | | |
| 5 | IC11S-BD-EJR | Single Slot SMT Connectors For Card-Bus Based PC Cards Single Slot SMT Connectors For Card-Bus Based PC Cards
IC11S Series PC Card Standard Compliant
Reduced height : 5.6mm high
sFeatures
1. PC Card Standard compliant:
• Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a g Hirose connector | | |
| 6 | IC11S-BD-FEJL | Single Slot SMT Connectors For Card-Bus Based PC Cards Single Slot SMT Connectors For Card-Bus Based PC Cards
IC11S Series PC Card Standard Compliant
Reduced height : 5.6mm high
sFeatures
1. PC Card Standard compliant:
• Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a g Hirose connector | | |
| 7 | IC11S-BD-FEJR | Single Slot SMT Connectors For Card-Bus Based PC Cards Single Slot SMT Connectors For Card-Bus Based PC Cards
IC11S Series PC Card Standard Compliant
Reduced height : 5.6mm high
sFeatures
1. PC Card Standard compliant:
• Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a g Hirose connector | |
| Esta página es del resultado de búsqueda del IC1HA-68RD-1.27SFA. Si pulsa el resultado de búsqueda de IC1HA-68RD-1.27SFA se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |