Datasheet.kr   

EL2150CW-T7A 데이터시트 PDF




Intersil에서 제조한 전자 부품 EL2150CW-T7A은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 EL2150CW-T7A 자료 제공

부품번호 EL2150CW-T7A 기능
기능 125MHz Single Supply/ Clamping Op Amps
제조업체 Intersil
로고 Intersil 로고


EL2150CW-T7A 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 19 페이지수

미리보기를 사용할 수 없습니다

EL2150CW-T7A 데이터시트, 핀배열, 회로
®
Data Sheet
EL2150, EL2157
March 12, 2004
FN7050.1
125MHz Single Supply, Clamping Op
Amps
The EL2150 and EL2157 are the
electronics industry's fastest single
supply op amps available. Prior single
supply op amps have generally been limited to bandwidths
and slew rates ¼ that of the EL2150 and EL2157. The
125MHz bandwidth, 275V/µs slew rate, and 0.05%/0.05°
differential gain/differential phase makes this part ideal for
single or dual supply video speed applications. With its
voltage feedback architecture, these amplifiers can accept
reactive feedback networks, allowing them to be used in
analog filtering applications. The inputs can sense signals
below the bottom supply rail and as high as 1.2V below the
top rail. Connecting the load resistor to ground and operating
from a single supply, the outputs swing completely to ground
without saturating. The outputs can also drive to within 1.2V
of the top rail. The EL2150 and EL2157 will output ±100mA
and will operate with single supply voltages as low as 2.7V,
making them ideal for portable, low power applications.
The EL2157 has a high speed disable feature. Applying a
low logic level to this pin reduces the supply current to 0µA
within 50ns. This is useful for both multiplexing and reducing
power consumption.
The EL2157 also has an output voltage clamp feature. This
clamp is a fast recovery (<7ns) output clamp that prevents
the output voltage from going above the preset clamp
voltage. This feature is desirable for A/D applications, as A/D
converters can require long times to recover if overdriven.
For applications where board space is critical the EL2150 is
available in the tiny 5-pin SOT-23 package, which has a
footprint 28% the size of an 8-pin SO. The EL2150 and
EL2157 are both available in an 8-pin SO package. All parts
operate over the industrial temperature range of -40°C to
+85°C. For dual, triple, or quad applications, contact the
factory.
Features
• Specified for 3V, 5V, or ±5V applications
• Power-down to 0µA (EL2157)
• Output voltage clamp (EL2157)
• Large input common mode range
0V < VCM < VS - 1.2V
• Output swings to ground without saturating
• -3dB bandwidth = 125MHz
• ±0.1dB bandwidth = 30MHz
• Low supply current = 5mA
• Slew rate = 275V/µs
• Low offset voltage = 2mV max (SO package)
• Output current = ±100mA
• High open loop gain = 80dB
• Diff gain/phase = 0.05%/0.05°
Applications
• Video amplifiers
• PCMCIA applications
• A/D drivers
• Line drivers
• Portable computers
• High speed communications
• RGB applications
• Broadcast equipment
• Active filtering
Ordering Information
PART NUMBER PACKAGE TAPE & REEL PKG. DWG. #
EL2150CS
8-Pin SO
- MDP0027
EL2150CS-T7
8-Pin SO
7” MDP0027
EL2150CS-T13 8-Pin SO
13” MDP0027
EL2150CW-T7 5-Pin SOT-23 7” (3K pcs)
MDP0038
EL2150CW-T7A 5-Pin SOT-23 7” (250 pcs) MDP0038
EL2157CS
8-Pin SO
- MDP0027
EL2157CS-T7
8-Pin SO
7” MDP0027
EL2157CS-T13 8-Pin SO
13” MDP0027
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.




EL2150CW-T7A pdf, 반도체, 판매, 대치품
EL2150, EL2157
DC Electrical Specifications VS = +5V, GND = 0V, TA = 25°C, VCM = 1.5V, VOUT = 1.5V, VCLAMP = +5V, VENABLE = +5V, unless
otherwise specified. (Note 1) (Continued)
PARAMETER
DESCRIPTION
CONDITIONS
MIN TYP MAX UNIT
VON
IOUT
IOUT,OFF
VIH-EN
VIL-EN
IIH-EN
Negative Output Voltage Swing
Output Current (Note 2)
Output Current, Disabled
ENABLE pin Voltage for Power Up
VS = 12V, AV = 1, RL = 150to 0V
VS = ±5V, AV = 1, RL = 1kto 0V
VS = ±5V, AV = 1, RL = 150to 0V
VS = ±5V, AV = 1, RL = 10to 0V
VS = ±5V, AV = 1, RL = 50to 0V
VENABLE = 0.5V
Relative to GND pin
ENABLE pin Voltage for Shut Down Relative to GND pin
ENABLE pin Input Current-High
(Note 3)
VS = VCLAMP = 12V, VENABLE = 12V
5.5 8
-4.0
-3.7 -3.4
±75 ±100
±60
0 20
2.0
0.5
340 410
mV
V
V
mA
mA
µA
V
V
µA
IIL-EN
ENABLE pin Input Current-Low
(Note 3)
VS = VCLAMP = 12V, VENABLE = 0.5V
0 1 µA
VOR-CL
Voltage Clamp Operating Range
(Note 4)
Relative to GND pin
1.2
VOP
V
VACC-CL
IIH-CL
IIL-CL
CLAMP Accuracy
CLAMP pin Input Current - High
CLAMP pin Input Current - Low
VIN = 4V, RL = 1kto GND
VCLAMP = 1.5V and 3.5V
VS = VCLAMP = 12V
VS = 12V, VCLAMP = 1.2V
-250
100
250
mV
12 25 µA
-20 -15
µA
NOTES:
1. CLAMP pin and ENABLE pin specifications apply only to the EL2157.
2. Internal short circuit protection circuitry has been built into the EL2150/EL2157. See the Applications section.
3. If the disable feature is not desired, tie the ENABLE pin to the VS pin, or apply a logic high level to the ENABLE pin.
4. The maximum output voltage that can be clamped is limited to the maximum positive output Voltage, or VOP. Applying a voltage higher than
VOP inactivates the clamp. If the clamp feature is not desired, either tie the CLAMP pin to the VS pin, or simply let the CLAMP pin float.
4

4페이지










EL2150CW-T7A 전자부품, 판매, 대치품
EL2150, EL2157
Typical Performance Curves (Continued)
3dB Bandwidth vs
Supply Voltage for
Non-Inverting Gains
Frequency Response for
Various Supply Voltages,
AV = + 1
PSSR and CMRR
vs Frequency
3dB Bandwidth vs Supply
Voltage for Inverting Gains
Frequency Response for
Various Supply Voltages,
AV = + 2
PSRR and CMRR vs
Die Temperature
Open Loop Gain and
Phase vs Frequency
Open Loop Voltage Gain
vs Die Temperature
Closed Loop Output
Impedance vs Frequency
7

7페이지


구       성 총 19 페이지수
다운로드[ EL2150CW-T7A.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
EL2150CW-T7

125MHz Single Supply/ Clamping Op Amps

Intersil
Intersil
EL2150CW-T7A

125MHz Single Supply/ Clamping Op Amps

Intersil
Intersil

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵