Datasheet.kr   

LC01-6TD 데이터시트 PDF




Semtech에서 제조한 전자 부품 LC01-6TD은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 LC01-6TD 자료 제공

부품번호 LC01-6TD 기능
기능 Low Capacitance TVS for High-Speed Telecommunication Systems
제조업체 Semtech
로고 Semtech 로고


LC01-6TD 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 7 페이지수

미리보기를 사용할 수 없습니다

LC01-6TD 데이터시트, 핀배열, 회로
LC01-6
Low Capacitance TVS for High-Speed
Telecommunication Systems
PROTECTION PRODUCTS
Description
The LC01-6 transient voltage suppressor is designed to
protect components which are connected to high
speed telecommunication lines from voltage surges
caused by lightning, electrostatic discharge (ESD), and
electrical fast transients (EFT).
TVS diodes are ideal for use as board level protection
of sensitive semiconductor components. The LC01-6
is designed for metallic mode, secondary line side
protection in digital line card applications. It features
solid-state silicon-avalanche technology for unmatched
transient protection without device degradation. The
LC01-6 combines TVS diodes with low capacitance
compensation diodes to provide an integrated, low
capacitance protection solution. Additional features
include sub-nanosecond response time, a low operat-
ing voltage of 6 volts, and low clamping voltage.
The LC01-6 is suitable for use on T1/E1 and xDSL
interfaces in equipment such as base stations, routers,
and channel service units. The LC01-6 meets the long-
haul (outer-building) transient immunity requirements
of Bellcore 1089, FCC Part 68 (Type A and B surges),
and IEC 61000-4-5.
Features
u 1500 watts peak pulse power (tp = 10/1000µs)
u Transient protection for high speed data lines to
IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact)
IEC 61000-4-5 (Lightning) 95A (8/20µs)
Bellcore 1089 (Outer-Building),
100A (10/1000µs), 500A (2/10µs)
FCC Part 68 200A (10/160µs)
ITU K.20 200A (5/310µs)
u Differential protection for one Tip & Ring line pair
u Low capacitance for high speed interfaces
u Low operating & clamping voltage
u Integrated structure saves board space and
increases reliability
u Solid-state silicon-avalanche technology
Mechanical Characteristics
u JEDEC SO-16W package
u UL 497B listed
u Molding compound flammability rating: UL 94V-0
u Marking : Part number, date code, logo
u Packaging : Tube or Tape and Reel per EIA 481
Applications
u T1/E1 Line Cards
u Base Stations
u WAN Interfaces
u xDSL Interfaces
u CSU/DSU Equipment
Circuit Diagram
Schematic & PIN Configuration
Revision 9/2000
SO-16W (Top View)
1 www.semtech.com




LC01-6TD pdf, 반도체, 판매, 대치품
LC01-6
PROTECTION PRODUCTS
Applications Information
Device Connection Options for Protection of High-
Speed Data Lines
The LC01-6 is designed to protect high-speed data
lines from transient over-voltages which result from
lightning and ESD. The device is designed to protect
one line pair in differential (Line-to-Line) mode. Pins 1-
8 are connected to line 1 and pins 9-16 are connected
to line 2 as shown. All pins should be connected for
best results.
T1/E1 Linecard Protection
A typical long-haul T1/E1 linecard protection circuit is
shown below. The LC01-6 is connected between Tip &
Ring on the transmit and receive line pairs. It provides
protection to metallic (line-to-line) lightning surges per
Bellcore 1089 and FCC Part 68. Depending on the
application, a high voltage crowbar device (not shown)
such as a gas discharge tube (GDT) or TVS Thyristor
may be used to suppress common mode (line-to-
ground) surges. To complete the protection circuit, the
SRDA05-4 (or SRDA3.3-4 for 3.3V supplies) is em-
ployed as the secondary IC side protection element.
This device helps prevent the transceiver from latching
up by providing fine clamping of transients that are
coupled through the transformer. Positive temperature
coefficient (PTC) resistors or fuses are also required for
AC power cross protection. For further information,
reference Semtech application note AN97-10.
Figure 1 - Schematic and Pin Configuration
Figure 2 - Connection for Differential Protection
(Line-to-Line)
ã 2000 Semtech Corp.
4
www.semtech.com

4페이지










LC01-6TD 전자부품, 판매, 대치품
PROTECTION PRODUCTS
Ordering Information
Part
Number
Working
Voltage
Qty per
Reel
LC01-6.TD
6V
1000
Note:
(1) No suffix indicates tube pack.
Reel Size
13 Inch
LC01-6
Contact Information
ã 2000 Semtech Corp.
Semtech Corporation
Protection Products Division
652 Mitchell Rd., Newbury Park, CA 91320
Phone: (805)498-2111 FAX (805)498-3804
7
www.semtech.com

7페이지


구       성 총 7 페이지수
다운로드[ LC01-6TD.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
LC01-6TD

Low Capacitance TVS for High-Speed Telecommunication Systems

Semtech
Semtech

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵