|
|
Número de pieza | LMC6572 | |
Descripción | Low Voltage (2.7V and 3V) Operational Amplifier | |
Fabricantes | National Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LMC6572 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
No Preview Available ! December 1996
LMC6572 Dual/LMC6574 Quad
Low Voltage (2.7V and 3V) Operational Amplifier
General Description
Low voltage operation and low power dissipation make the
LMC6574/2 ideal for battery-powered systems.
3V amplifier performance is backed by 2.7V guarantees to
ensure operation throughout battery lifetime. These guaran-
tees also enable analog circuits to operate from the same
3.3V supply used for digital logic.
Battery life is maximized because each amplifier dissipates
only micro-watts of power.
The LMC6574/2 does not sacrifice functionality for low volt-
age operation. The LMC6574/2 generates 120 dB of
open-loop gain just like a conventional amplifier, but the
LMC6574/2 can do this from a 2.7V supply.
These amplifiers are designed with features that optimize
low voltage operation. The output voltage swings rail-to-rail
to maximize signal-to-noise ratio and dynamic signal range.
The common-mode input voltage range extends from
800 mV below the positive supply to 100 mV below ground.
This device is built with National’s advanced Double-Poly
Silicon-Gate CMOS process.
LMC6572 is also available in MSOP package which is al-
most half the size of a SO-8 device.
Features
(Typical unless otherwise noted)
n Guaranteed 2.7V and 3V Performance
n Rail-to-Rail Output Swing (within 5 mV of supply rail,
100 kΩ load)
n Ultra-Low Supply Current: 40 µA/Amplifier
n Low Cost
n Ultra-Low Input Current: 20 fA
n High Voltage Gain @ VS=2.7V, RL=100 kΩ: 120 dB
n Specified for 100 kΩ and 5 kΩ loads
n Available in MSOP Package
Applications
n Transducer Amplifier
n Portable or Remote Equipment
n Battery-Operated Instruments
n Data Acquisition Systems
n Medical Instrumentation
n Improved Replacement for TLV2322 and TLV2324
Connection Diagrams
8-Pin DIP/SO/MSOP
14-Pin DIP/SO
DS011934-1
Order Number LMC6572AIN, LMC6572BIN,
LMC6572AIM, LMC6572BIM or LMC6572BIMM
See NS Package Number N08E, M08A or MUA08A
DS011934-2
Order Number LMC6574AIN, LMC6574BIN,
LMC6574AIM or LMC6574BIM
See NS Package Number N14A or M14A
© 1999 National Semiconductor Corporation DS011934
www.national.com
1 page 2.7V AC Electrical Characteristics (Continued)
Unless otherwise specified, all limits guaranteed for TJ = 25˚C, V+ = 2.7V, V− = 0V, VCM = VO = V+/2 and RL > 1 MΩ. Bold-
face limits apply at the temperature extremes.
Symbol
Parameter
Conditions
Typ LMC6574AI LMC6574BI
(Note 5) LMC6572AI LMC6572BI
Units
Limit
Limit
(Note 6)
(Note 6)
Current Noise
T.H.D. Total Harmonic Distortion
F = 10 kHz, AV = −2
RL = 10 kΩ, VO = 1.0 VPP
0.05
%
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in-
tended to be functional, but specific performance is not guaranteed. For guaranteed specifications and test conditions, see the Electrical Characteristics.
Note 2: Human body model, 1.5 kΩ in series with 100 pF.
Note 3: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the
maximum allowed junction temperature of 150˚C.
Note 4: The maximum power dissipation is a function of TJ(Max), θJA, and TA. The maximum allowable power dissipation at any ambient temperature is
PD = (TJ(Max) − TA)/θJA. All numbers apply for packages soldered directly into a PC board.
Note 5: Typical values represent the most likely parametric norm.
Note 6: All limits are guaranteed by testing or statistical analysis.
Note 7: V+ = 3V, VCM = 1.5V and RL connected to 1.5V. For Sourcing tests, 1.5V ≤ VO ≤ 2.5V. For Sinking tests, 0.5V ≤ VO ≤ 1.5V.
Note 8: Connected as Voltage Follower with 1.0V step input. Number specified is the slower of the positive and negative slew rates.
Note 9: Input referred, V+ = 3V and RL = 100 kΩ connected to 1.5V. Each amp excited in turn with 1 KHz to produce VO = 2 VPP.
Typical Performance Characteristics VS = +3V, TA = 25˚C, Unless otherwise specified
Supply Current vs
Supply Voltage (Dual Package)
Input Current vs
Temperature
Sourcing Current vs
Output Voltage
Sinking Current vs
Output Voltage
DS011934-18
DS011934-19
Output Voltage Swing vs
Supply Voltage
DS011934-20
Input Voltage Noise vs
Frequency
DS011934-21
DS011934-22
5
DS011934-23
www.national.com
5 Page Physical Dimensions inches (millimeters) unless otherwise noted
8-Pin Small Outline Package
Order Package Number LMC6572AIM or LMC6572BIM
NS Package Number M08A
14-Pin Small Outline Package
Order Package Number LMC6574AIM or LMC6574BIM
NS Package Number M14A
11
www.national.com
11 Page |
Páginas | Total 13 Páginas | |
PDF Descargar | [ Datasheet LMC6572.PDF ] |
Número de pieza | Descripción | Fabricantes |
LMC6572 | LMC6572/LMC6574 Dual and Quad Low Voltage (2.7V and 3V) Operational Amplifier (Rev. D) | Texas Instruments |
LMC6572 | Low Voltage (2.7V and 3V) Operational Amplifier | National Semiconductor |
LMC6574 | LMC6572/LMC6574 Dual and Quad Low Voltage (2.7V and 3V) Operational Amplifier (Rev. D) | Texas Instruments |
LMC6574 | Low Voltage (2.7V and 3V) Operational Amplifier | National Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |