|
|
|
부품번호 | MBR340 기능 |
|
|
기능 | SCHOTTKY BARRIER RECTIFIER 3.0 AMPERES 40 VOLTS | ||
제조업체 | ON Semiconductor | ||
로고 | |||
전체 4 페이지수
MBR340
Preferred Device
Axial Lead Rectifier
. . . employing the Schottky Barrier principle in a large area
metal–to–silicon power diode. State–of–the–art geometry features
epitaxial construction with oxide passivation and metal overlap
contact. Ideally suited for use as rectifiers in low–voltage,
high–frequency inverters, free wheeling diodes, and polarity
protection diodes.
• Extremely Low VF
• Low Power Loss/High Efficiency
• Highly Stable Oxide Passivated Junction
• Low Stored Charge, Majority Carrier Conduction
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.1 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
• Shipped in plastic bags, 500 per bag
• Available Tape and Reeled, 1500 per reel, by adding a “RL’’ suffix to
the part number
• Polarity: Cathode indicated by Polarity Band
• Marking: B340
MAXIMUM RATINGS
Rating
Symbol
Max
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
TA = 65°C (RqJA = 28°C/W,
P.C. Board Mounting)
VRRM
VRWM
VR
IO
40
3.0
Non–Repetitive Peak
Surge Current (Note 1)
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz, TL = 75°C)
Operating and Storage Junction
Temperature Range
(Reverse Voltage Applied)
IFSM
80
TJ, Tstg –65 to +150
Peak Operating Junction
Temperature
(Forward Current Applied)
TJ(pk)
150
1. Lead Temperature reference is cathode lead 1/32″ from case.
Unit
V
A
A
°C
°C
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
3.0 AMPERES
40 VOLTS
AXIAL LEAD
CASE 267–05
(DO–201AD)
STYLE 1
MARKING DIAGRAM
B340
B340 = Device Code
ORDERING INFORMATION
Device
Package
Shipping
MBR340
Axial Lead
500 Units/Bag
MBR340RL
Axial Lead 1500/Tape & Reel
Preferred devices are recommended choices for future use
and best overall value.
© Semiconductor Components Industries, LLC, 2002
January, 2002 – Rev. 3
1
Publication Order Number:
MBR340/D
MBR340
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 267–05
(DO–201AD)
ISSUE G
K
D
1
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
2
INCHES
MILLIMETERS
DIM MIN MAX MIN MAX
A 0.287 0.374 7.30 9.50
B B 0.189 0.209 4.80 5.30
K D 0.047 0.051 1.20 1.30
K 1.000 --- 25.40 ---
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: [email protected]
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
http://onsemi.com
4
MBR340/D
4페이지 | |||
구 성 | 총 4 페이지수 | ||
다운로드 | [ MBR340.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
MBR340 | Axial Lead Rectifiers | Motorola Semiconductors |
MBR340 | SCHOTTKY DIE SPECIFICATION | ETC |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |