Datasheet.kr   

B4B-PH-K-S 데이터시트 PDF




JST에서 제조한 전자 부품 B4B-PH-K-S은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


 

PDF 형식의 B4B-PH-K-S 자료 제공

부품번호 B4B-PH-K-S 기능
기능 PH Connector
제조업체 JST
로고 JST 로고


B4B-PH-K-S 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.




전체 6 페이지수

미리보기를 사용할 수 없습니다

B4B-PH-K-S 데이터시트, 핀배열, 회로
Crimp
2.0mm
(.079") pitch
PH CONNECTOR
Disconnectable Crimp style connectors
Emboss Tape
This is a thin, low-profile 2.0mm (.079")
pitch connector 7.5mm (.295") in height
after mounting and 4.5mm (.177") in width.
It is designed to meet the demand for
high-density connection of internal wires
to printed circuit boards. It is compact,
highly reliable and low in cost.
16
Features –––––––––––––––––––––––
Reliable contact
The contact has long dimples near the center to ensure a good
connection at all times, even under conditions of vibration and
mechanical abuse, and when used with low voltage and low
current circuits.
Easy and effective crimping
Although the contact is compact, it has a long wire strip
holding length of 2.6 +/- 0.4mm (.102" +/-.016"). This long
length simplifies automatic crimping and the crimping of
shielded wires.
Fully shrouded header
The fully shrouded header has walls on all four sides to
prevent improper connection to the mating housing and to
prevent the instruction of flux and other contaminants.
High solderable square post
The square post is copper-undercoated and tin/lead-plated for
superior solderability and for whisker prevention.
Printed circuit board retention mechanism
The solder side of the header has a retention mechanism that
prevents it from floating during soldering. As a result, the
header can be positioned accurately.
Compatible with the KR insulation
displacement connector
The same shrouded header can be used for either PH crimp-
style connector or KR insulation displacement connector. This
allows both types of connector to be used interchangeably
without replacing the header.
Surface mount model (SMT)
This connector is also available in a surface mount
configuration. Its housing is made of heat resistant resin so
that it is not adversely affected during reflow soldering.
Because of its tiny size and ability to be surface mounted, this
connector meets the demand for high-density mounting of
components inside electronic products.
Specifications ––––––––––––––––––
Current rating: 2A AC, DC (AWG #24)
Voltage rating: 100V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m max.
After environmental testing/20m max.
• Insulation resistance: 1,000M min.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #32 to #24
• Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063")
* Contact JST for details
Standards –––––––––––––––––––––
0Recognized E60389
1Certified LR20812
2R75087




B4B-PH-K-S pdf, 반도체, 판매, 대치품
PH CONNECTOR
SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––
The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.
•SMT type shrouded headers are not TU¨ V approved.
SM type
Top entry type
B
1.95
(.075)
A
2.0(.079)
5.0
(.197)
1.9(.075)
3.1
(.122)
Cir-
cuits
2
4
5
7
10
11
Model No.
Dimensions mm(in.)
Top entry Side entry
type type
A
B
C
B2B-PH-SM
2.0(.079) 5.9(.232) 4.7(.185)
B4B-PH-SM
6.0(.236) 9.9(.390) 8.7(.343)
– S 5B-PH-SM 8.0(.315) 11.9(.469) 10.7(.421)
B7B-PH-SM S 7B-PH-SM 12.0(.472) 15.9(.626) 14.7(.579)
– S10B-PH-SM 18.0(.709) 21.9(.862) 20.7(.815)
– S11B-PH-SM 20.0(.787) 23.9(.941) 22.7(.894)
Q'ty /
box
1,000
500
500
500
250
250
1.0
(.039)dia.
1.35(.053)
C
Side entry type
3.2
(.126)
Material and Finish
Post: Brass, nickel-undercoated, tin/lead-plated
Wafer: PPS, UL94V-0, brown
B
1.95
(.077)
A
2.0(.079)
1.0
(.039)dia.
1.35(.053)
C
3.0 1.6
(.118) (.063)
6.0(.236) 3.4(.134)
SM3 type
Top entry type (with solder tabs)
B
2.975
(.117)
A
2.0(.079)
5.0
(.197)
[
2.0
(.079)
]
1.9(.075)
1.4
(.055)
Circuit No.1
2.2
(.087)
Side entry type
2.0
2.95 (.079)
(.116)
A
B
1.6
(.063)
6.0(.236)
[ (.21.062) ]
Cir-
cuits
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Model No.
Dimensions mm(in.)
Top entry
type
Side entry
type
A
B
B 2B-PH-SM3-TB S 2B-PH-SM3-TB 2.0( .079) 7.9( .311)
B 3B-PH-SM3-TB S 3B-PH-SM3-TB 4.0( .157) 9.9( .390)
B 4B-PH-SM3-TB S 4B-PH-SM3-TB 6.0( .236) 11.9( .469)
B 5B-PH-SM3-TB S 5B-PH-SM3-TB 8.0( .315) 13.9( .547)
B 6B-PH-SM3-TB S 6B-PH-SM3-TB 10.0( .394) 15.9( .626)
B 7B-PH-SM3-TB S 7B-PH-SM3-TB 12.0( .472) 17.9( .705)
B 8B-PH-SM3-TB S 8B-PH-SM3-TB 14.0( .551) 19.9( .783)
B 9B-PH-SM3-TB S 9B-PH-SM3-TB 16.0( .630) 21.9( .862)
B10B-PH-SM3-TB S10B-PH-SM3-TB 18.0( .709) 23.9( .941)
B11B-PH-SM3-TB 20.0( .787) 25.9(1.020)
B12B-PH-SM3-TB S12B-PH-SM3-TB 22.0( .866) 27.9(1.098)
B13B-PH-SM3-TB S13B-PH-SM3-TB 24.0( .945) 29.9(1.177)
B14B-PH-SM3-TB S14B-PH-SM3-TB 26.0(1.024) 31.9(1.256)
B15B-PH-SM3-TB S15B-PH-SM3-TB 28.0(1.102) 33.9(1.335)
B16B-PH-SM3-TB 30.0(1.181) 35.9(1.413)
Q'ty /
reel
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Material and Finish
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Nylon 46, UL94V-0, natural (white)
Solder tab: Brass, copper-undercoated, tin/lead-plated
Note:
1. The products listed above are supplied on embossed-tape.
2. Contact JST for the top entry type headers with suction cap.
19

4페이지












구       성 총 6 페이지수
다운로드[ B4B-PH-K-S.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
B4B-PH-K-S

PH Connector

JST
JST

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵