|
|
PDF MAX4610CPD Data sheet ( Hoja de datos )
| Número de pieza | MAX4610CPD | |
| Descripción | Low-Voltage / Quad / SPST CMOS Analog Switches | |
| Fabricantes | Maxim Integrated | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAX4610CPD (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
19-4793; Rev 0; 1/99
Low-Voltage, Quad, SPST
CMOS Analog Switches
General Description
The MAX4610/MAX4611/MAX4612 quad, low-voltage,
single-pole/single-throw (SPST) analog switches are
pin-compatible with the industry-standard 74HC4066
analog switch. On-resistance (100Ω max) is matched
between switches to 4Ω max and is flat (4Ω max) over
the specified signal range. Each switch handles V+ to
GND analog signal levels. Maximum off-leakage current
is only 1nA at TA = +25°C and 2nA at TA = +85°C.
The MAX4610 has four normally open (NO) switches,
and the MAX4611 has four normally closed (NC)
switches. The MAX4612 has two NO switches and two
NC switches. These CMOS switches operate from a
single +2V to +12V supply. All digital inputs have +0.8V
and +2.4V logic thresholds, ensuring TTL/CMOS-logic
compatibility when using a single +5V supply.
________________________Applications
Battery-Operated Equipment
Audio/Video Signal Routing
Low-Voltage Data-Acquisition Systems
Sample-and-Hold Circuits
Communication Circuits
____________________________Features
o Pin-Compatible with Industry-Standard 74HC4066
o Guaranteed On-Resistance
100Ω max (5V Supply)
46Ω max (12V Supply)
o Guaranteed Match Between Channels (4Ω max)
o Guaranteed Flatness Over Signal Range (18Ω max)
o Off-Leakage Current Over Temperature
<2nA at TA = +85°C
o >2kV ESD Protection per Method 3015.7
o Rail-to-Rail® Signal Handling
o TTL/CMOS-Logic Compatible
Ordering Information
PART
TEMP. RANGE PIN-PACKAGE
MAX4610CUD
0°C to +70°C
14 TSSOP**
MAX4610CSD
0°C to +70°C
14 Narrow SO
MAX4610CPD
0°C to +70°C
14 Plastic DIP
MAX4610C/D
0°C to +70°C
Dice*
MAX4610EUD -40°C to +85°C
14 TSSOP**
MAX4610ESD
-40°C to +85°C
14 Narrow SO
MAX4610EPD
-40°C to +85°C
14 Plastic DIP
Ordering Information continued at end of data sheet.
* Contact factory for dice specifications.
**Contact factory for availability.
Pin Configurations/Truth Tables
TOP VIEW
NO1 1
COM1 2
NO2 3
COM2 4
IN2 5
IN3 6
GND 7
MAX4610
14 V+
13 IN1
12 IN4
11 NO4
10 COM4
9 COM3
8 NO3
INPUT
LOW
HIGH
SWITCH STATE
OFF
ON
TSSOP/SO/DIP
MAX4611/MAX4612 Pin Configurations/Truth Tables appear at end of data sheet.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.
1 page  
Low-Voltage, Quad, SPST
CMOS Analog Switches
ELECTRICAL CHARACTERISTICS—Single +12V Supply
(V+ = +12V, VIN_H = 4V, VIN_L = 0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
ANALOG SWITCH
Analog Signal Range
(Note 3)
On-Resistance
LOGIC INPUTS
Input High Voltage
Input Low Voltage
SUPPLY
Positive Supply Current
VCOM_,
VNO_,
VNC_,
RON
V+ = 12V,
ICOM = 2mA,
VNO_ = VNC_ = 10V
TA = +25°C
TA = TMIN to TMAX
VIN_H
VIN_L
I+ VIN_ = 0 or V+, all switches on or off
MIN
TYP
(Note 2)
MAX
UNITS
0 V+
30 45
60
4.0 2.8
2.5 0.8
-1 0.001
1
V
Ω
V
V
µA
Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 3: Guaranteed by design.
Note 4: ∆RON = RON (max) - RON (min).
Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Note 6: Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25°C.
Note 7: Off-Isolation = 20log10 (VCOM_ / VNO_), VCOM_ = output, VNO_ = input to off switch.
Note 8: Between any two switches.
_______________________________________________________________________________________ 5
5 Page 
Low-Voltage, Quad, SPST
CMOS Analog Switches
___________________________________________________________Chip Topographies
MAX4610/MAX4611
V+ IN1
IN4
MAX4612
V+ IN1
IN4
NO1 (NC1)
COM1
NO2 (NC2)
COM2
NO1
NO4
(NC4)
COM1
COM4
NO2
0.049" COM2
(1.24mm)
COM3
NC4
COM4
0.049"
(1.24mm)
COM3
IN2 IN3 GND NO3 (NC3)
0.054"
(1.37mm)
( ) ARE FOR MAX4611
IN2 IN3 GND NC3
0.054"
(1.37mm)
TRANSISTOR COUNT: 132
SUBSTRATE CONNECTED TO V+
________________________________________________________Package Information
______________________________________________________________________________________ 11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet MAX4610CPD.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAX4610CPD | Low-Voltage / Quad / SPST CMOS Analog Switches | Maxim Integrated |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |