MF-2500DS-T12-200 Datasheet PDF - Mitsubishi
| Part Number | MF-2500DS-T12-200 | |
| Description | SONET/SDH TRANSMITTER & RECIEVER | |
| Manufacturers | Mitsubishi | |
| Logo |  |
|
|
There is a preview and MF-2500DS-T12-200 download ( pdf file ) link at the bottom of this page. Total 9 Pages | ||
Preview 1 page No Preview Available !
MITSUBISHI (OPTICAL DEVICES)
MF-2500DS-T12-18x/19x/20x/21x
MF-2500DS-R13-18x
MF-2500DS-R14-19x/20x/21x
SONET/SDH TRANSMITTER & RECIEVER
DESCRIPTION
This product is designed to provide high optical
performance for SDH STM-16/SONET OC-48.
Transmitter uses uncooled laser module with drivered
by specific integrated circuit.
Receiver uses PD or APD preamp-module and
integrated circuits for reshaping, retiming and
regenerating optical signal.
FEATURES
Full SONET/SDH line up
Low cost
Compact, low power
-5.2 V,+5V power supply, DC/DC converter built in
for Rx
Case Temp. Range: Class 1; -5 to +75°C / Class
2; -40 to +85°C
Clock recovery
Multi source
APPLICATION
Short haul and long haul telecommunication systems
for SDH STM-16 / SONET OC-48.
2.5Gb/s ATM LAN and ATM switching systems.
ABSOLUTE MAXIMUM RATINGS
Stress below listed absolute maximum rating may cause permanent damage to the module.
Th is is a stress o nly and functional operation of the module at these or any other conditions in excess of those
given in the operational sections of this data sheet .
Exposure to Absolute Maximum Rating for extended periods may affect module reliability.
Tc=25°C
Parameters
Symbol
Ratings
Unit
Supply voltage
Vcc +6.0
Vee -6.0
V
V
High output current
- TBD mA
Input voltage
- TBD
V
Storage temperature
Operating case temperature
Soldering Temperature
Soldering Time
Tstg -40 to +85
Tc
class 1:-5 to +75
class 2:-40 to +85
- +260
- 10
°C
°C
°C
sec
Relative humidity(non condensation)
- 10 to 80
%
Fiber bend radius
- 32 mm
|
| |
 
MITSUBISHI (OPTICAL DEVICES)
MF-2500DS-T12-18x/19x/20x/21x
MF-2500DS-R13-18x
MF-2500DS-R14-19x/20x/21x
SONET/SDH TRANSMITTER & RECIEVER
PIN ALLOCATION
Transmitter pin allocation
No. Symbol
Description
No. Symbol
Description
1 VEE
Negative power supply ****
24 VCC
Positive power supply ****
2
BACK(+)
Monitoring for back fact current
23 GND
Ground
3 BIAS(+) Monitoring for LD current
22 Cki-
False clock input
4 SDC
Shut Down Command ***
21 GND
Ground
5 SELC
Clock mode select **
20 Cki+
True clock input *
6 GND
Ground
19 GND
Ground
7 NUC
No user connection
18 Di-
False data input
8 LDA
Laser Degrade Alarm *****
17 GND
Ground
9 NUC
No user connection
16 Di+
True data input
10 NUC
No user connection
15 GND
Ground
11 GND
Ground
14 NUC
No user connection
12 VEE
Negative power supply ****
13 VCC
Positive power supply ****
*: The falling edge of Cki clock input signal is at the Di data eye pattern crossing point.
**: When open (or low) the module is in the operating mode. When high the module operates in non
clocked mode.
***: When high the module in the shut down mode (no optical output power).
When open (or low) the module is in the operating mode.
****: Vcc-Vee; with Vcc at +5V Vee must be at 0V; with Vee at -5.5V Vcc must be at 0V
*****: When provided a digital alarm indicates that the laser is degraded.
The active level is a low level.
This pin must be teidto Vcc through a 100k ohm resistor when the digital alarm is not proved
Receiver pin allocation
No. Symbol
Description
No. Symbol
Description
1
HV / NIC
High Voltage *
24 NUC
No user connection
2 NUC
No user connection
23 OILV / NIC Optical Input Light Voltage ##
3 LPA
Loss of Power Alarm ***
22 VCC
Positive power supply
4 GND
Ground **
21 NUC
No user connection
5 Cko-
False clock output
20 GND
Ground **
6 Cko+
True clock output
19 GND
Ground **
7 GND
Ground **
18 VEE
Negative power supply
8 VCC
Positive power supply
17 GND
Ground **
9 GND
Ground
16 GND
Ground **
10 Do+
True data output
15 GND
Ground **
11 Do-
False data output
14 GND
Ground **
12 GND
Ground **
13 DTV / NIC Decision Threshold Voltage #
*: This pin is Not Internally Connected(NIC) in case of the high voltage generator is inside the module.
**: Package is at same potential as GND .
***: LPA output is a logic level that indicates the presence or absence of a sufficient optical input level.
A logical high level indicates an input optical level too low.
#: This pen is not internally connected if the amplitude decision threshold is not made adjustable.
##: This pen is not internally connected if the Optical Input Light Voltage functionality is not provided.
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for MF-2500DS-T12-200 electronic component. |
| Information | Total 9 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ MF-2500DS-T12-200.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| MF-2500DS-T12-200 | The function is SONET/SDH TRANSMITTER & RECIEVER. Mitsubishi | |
| MF-2500DS-T12-201 | The function is SONET/SDH TRANSMITTER & RECIEVER. Mitsubishi | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
MF-2
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||