|
|
|
부품번호 | MC7915CT 기능 |
|
|
기능 | THREE-TERMINAL NEGATIVE FIXED VOLTAGE REGULATORS | ||
제조업체 | Motorola Semiconductors | ||
로고 | |||
전체 12 페이지수
Three-Terminal Negative
Voltage Regulators
The MC7900 series of fixed output negative voltage regulators are
intended as complements to the popular MC7800 series devices. These
negative regulators are available in the same seven–voltage options as the
MC7800 devices. In addition, one extra voltage option commonly employed
in MECL systems is also available in the negative MC7900 series.
Available in fixed output voltage options from – 5.0 V to – 24 V, these
regulators employ current limiting, thermal shutdown, and safe–area
compensation – making them remarkably rugged under most operating
conditions. With adequate heatsinking they can deliver output currents in
excess of 1.0 A.
• No External Components Required
• Internal Thermal Overload Protection
• Internal Short Circuit Current Limiting
• Output Transistor Safe–Area Compensation
• Available in 2% Voltage Tolerance (See Ordering Information)
Representative Schematic Diagram
2.0 k 8.0 k
Gnd
3.6 k 1.0 k 4.0 k R1
1.2 k 1.6 k
R2
Order this document by MC7900/D
MC7900
Series
THREE–TERMINAL
NEGATIVE FIXED
VOLTAGE REGULATORS
T SUFFIX
PLASTIC PACKAGE
CASE 221A
Heatsink surface
connected to Pin 2.
1
2
3
Pin 1. Ground
2. Input
3. Output
D2T SUFFIX
PLASTIC PACKAGE
CASE 936
(D2PAK)
12
3
Heatsink surface (shown as terminal 4 in
case outline drawing) is connected to Pin 2.
10 k
20 pF
10 pF 10 k
2.0 k 20 k 20 k
1.1 k
240
750
This device contains 26 active transistors.
VO
0.3
VI
ORDERING INFORMATION
Device
Output Voltage
Operating
Tolerance
Temperature Range
MC79XXACD2T
2%
MC79XXCD2T
MC79XXACT
4%
2%
TJ = 0° to +125°C
MC79XXCT
4%
MC79XXBD2T
MC79XXBT
4% TJ = – 40° to +125°C
XX indicates nominal voltage.
Package
Surface Mount
Insertion Mount
Surface Mount
Insertion Mount
STANDARD APPLICATION
Input
Cin*
0.33 µF
MC79XX
Output
CO**
1.0 µF
A common ground is required between the input
and the output voltages. The input voltage must
remain typically 2.0 V above more negative even
during the high point of the input ripple voltage.
XX, These two digits of the type number
indicate nominal voltage.
** Cin is required if regulator is located an
appreciable distance from power supply filter.
** CO improve stability and transient response.
DEVICE TYPE/NOMINAL OUTPUT VOLTAGE
MC7905
MC7905.2
MC7906
MC7908
5.0 V
5.2 V
6.0 V
8.0 V
MC7912
MC7915
MC7918
MC7924
12 V
15 V
28 V
24 V
MOTOROLA ANALOG IC DEVICE DATA
© Motorola, Inc. 1996
Rev 6
1
MC7900
MC7906C
ELECTRICAL CHARACTERISTICS (VI = –11 V, IO = 500 mA, 0°C < TJ < +125°C, unless otherwise noted.)
Characteristics
Symbol Min Typ
Output Voltage (TJ = +25°C)
VO – 5.75 – 6.0
Line Regulation (Note 1)
(TJ = +25°C, IO = 100 mA)
– 8.0 Vdc ≥ VI ≥ – 25 Vdc
–9.0 Vdc ≥ VI ≥ –13 Vdc
(TJ = +25°C, IO = 500 mA)
– 8.0 Vdc ≥ VI ≥ – 25 Vdc
– 9.0 Vdc ≥ VI ≥ –13 Vdc
Regline
–
–
–
–
9.0
3.0
43
10
Load Regulation, TJ = +25°C (Note 1)
5.0 mA ≤ IO ≤ 1.5 A
250 mA ≤ IO ≤ 750 mA
Regload
–
–
13
5.0
Output Voltage
– 8.0 Vdc ≥ VI ≥ – 21 Vdc, 5.0 mA ≤ IO ≤ 1.0 A, P ≤ 15 W
VO
– 5.7
–
Input Bias Current (TJ = +25°C)
IIB – 4.3
Input Bias Current Change
– 8.0 Vdc ≥ VI ≥ – 25 Vdc
5.0 mA ≤ IO ≤ 1.5 A
∆IIB
––
––
Output Noise Voltage (TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)
Vn – 45
Ripple Rejection (IO = 20 mA, f = 120 Hz)
RR – 65
Dropout Voltage
IO = 1.0 A, TJ = +25°C
VI–VO
– 2.0
Average Temperature Coefficient of Output Voltage
IO = 5.0 A, 0°C ≤ TJ ≤ +125°C
∆VO/∆T
– –1.0
Max
– 6.25
Unit
Vdc
mV
60
30
120
60
120
60
– 6.3
8.0
1.3
0.5
–
–
–
–
mV
Vdc
mA
mA
µV
dB
Vdc
mV/°C
MC7908C
ELECTRICAL CHARACTERISTICS (VI = –14 V, IO = 500 mA, 0°C < TJ < +125°C, unless otherwise noted.)
Characteristics
Symbol Min Typ Max Unit
Output Voltage (TJ = +25°C)
VO –7.7 – 8.0 – 8.3 Vdc
Line Regulation (Note 1)
(TJ = +25°C, IO = 100 mA)
–10.5 Vdc ≥ VI ≥ –25 Vdc
–11 Vdc ≥ VI ≥ –17 Vdc
(TJ = +25°C, IO = 500 mA)
–10.5 Vdc ≥ VI ≥ –25 Vdc
–11 Vdc ≥ VI ≥ –17 Vdc
Load Regulation, TJ = +25°C (Note 1)
5.0 mA ≤ IO ≤ 1.5 A
250 mA ≤ IO ≤ 750 mA
Regline
Regload
–
–
–
–
–
–
mV
12 80
5.0 40
50 160
22 80
mV
26 160
9.0 80
Output Voltage
–10.5 Vdc ≥ VI ≥ – 23 Vdc, 5.0 mA ≤ IO ≤ 1.0 A, P ≤ 15 W
VO Vdc
–7.6 – – 8.4
Input Bias Current (TJ = +25°C)
Input Bias Current Change
–10.5 Vdc ≥ VI ≥ – 25 Vdc
5.0 mA ≤ IO ≤ 1.5 A
IIB – 4.3 8.0 mA
∆IIB mA
– – 1.0
– – 0.5
Output Noise Voltage (TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)
Ripple Rejection (IO = 20 mA, f = 120 Hz)
Dropout Voltage
IO = 1.0 A, TJ = +25°C
Vn – 52 – µV
RR – 62 – dB
VI–VO
Vdc
– 2.0 –
Average Temperature Coefficient of Output Voltage
IO = 5.0 mA, 0°C ≤ TJ ≤ +125°C
∆VO/∆T
mV/°C
– –1.0 –
NOTE: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately.
NOTE: 1. Pulse testing with low duty cycle is used.
4 MOTOROLA ANALOG IC DEVICE DATA
4페이지 MC7900
MC7918C
ELECTRICAL CHARACTERISTICS (VI = – 27 V, IO = 500 mA, 0°C < TJ < +125°C, unless otherwise noted.)
Characteristics
Symbol Min Typ
Output Voltage (TJ = +25°C)
VO –17.3 –18
Line Regulation (Note 1)
(TJ = +25°C, IO = 100 mA)
–21 Vdc ≥ VI ≥ – 33 Vdc
–24 Vdc ≥ VI ≥ – 30 Vdc
(TJ = +25°C, IO = 500 mA)
–21 Vdc ≥ VI ≥ – 33 Vdc
–24 Vdc ≥ VI ≥ – 30 Vdc
Regline
–
–
–
–
25
10
90
50
Load Regulation, TJ = +25°C (Note 1)
5.0 mA ≤ IO ≤ 1.5 A
250 mA ≤ IO ≤ 750 mA
Regload
–
–
110
55
Output Voltage
– 21 Vdc ≥ VI ≥ – 33 Vdc, 5.0 mA ≤ IO ≤ 1.0 A, P ≤ 15 W
VO
–17.1
–
Input Bias Current (TJ = +25°C)
IIB – 4.5
Input Bias Current Change
–21 Vdc ≥ VI ≥ – 33 Vdc
5.0 mA ≤ IO ≤ 1.5 A
∆IIB
––
––
Output Noise Voltage (TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)
Vn – 110
Ripple Rejection (IO = 20 mA, f = 120 Hz)
RR – 59
Dropout Voltage
IO = 1.0 A, TJ = +25°C
VI–VO
– 2.0
Average Temperature Coefficient of Output Voltage
IO = 5.0 mA, 0°C ≤ TJ ≤ +125°C
∆VO/∆T
– –1.0
Max
–18.7
Unit
Vdc
mV
180
90
360
180
360
180
–18.9
8.0
1.0
0.5
–
–
–
–
mV
Vdc
mA
mA
µV
dB
Vdc
mV/°C
MC7924C
ELECTRICAL CHARACTERISTICS (VI = – 33 V, IO = 500 mA, 0°C < TJ < +125°C, unless otherwise noted.)
Characteristics
Symbol Min Typ Max Unit
Output Voltage (TJ = +25°C)
VO – 23 – 24 – 25 Vdc
Line Regulation (Note 1)
(TJ = +25°C, IO = 100 mA)
– 27 Vdc ≥ VI ≥ – 38 Vdc
– 30 Vdc ≥ VI ≥ – 36 Vdc
(TJ = +25°C, IO = 500 mA)
– 27 Vdc ≥ VI ≥ – 38 Vdc
– 30 Vdc ≥ VI ≥ – 36 Vdc
Load Regulation, TJ = +25°C (Note 1)
5.0 mA ≤ IO ≤ 1.5 A
250 mA ≤ IO ≤ 750 mA
Regline
Regload
–
–
–
–
–
–
mV
31 240
14 120
118 470
70 240
mV
150 480
85 240
Output Voltage
– 27 Vdc ≥ VI ≥ – 38 Vdc, 5.0 mA ≤ IO ≤ 1.0 A, P ≤ 15 W
VO Vdc
– 22.8 – – 25.2
Input Bias Current (TJ = +25°C)
Input Bias Current Change
– 27 Vdc ≥ VI ≥ – 38 Vdc
5.0 mA ≤ IO ≤ 1.5 A
IIB – 4.6 8.0 mA
∆IIB mA
– – 1.0
– – 0.5
Output Noise Voltage (TA = +25°C, 10 Hz ≤ f ≤ 100 kHz)
Ripple Rejection (IO = 20 mA, f = 120 Hz)
Dropout Voltage
IO = 1.0 A, TJ = +25°C
Vn – 170 – µV
RR – 56 – dB
VI–VO
Vdc
– 2.0 –
Average Temperature Coefficient of Output Voltage
IO = 5.0 mA, 0°C ≤ TJ ≤ +125°C
∆VO/∆T
mV/°C
– –1.0 –
NOTE: 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately.
NOTE: 1. Pulse testing with low duty cycle is used.
MOTOROLA ANALOG IC DEVICE DATA
7
7페이지 | |||
구 성 | 총 12 페이지수 | ||
다운로드 | [ MC7915CT.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
MC7915C | 1.0A Negative Voltage Regulators | ON Semiconductor |
MC7915CT | THREE-TERMINAL NEGATIVE FIXED VOLTAGE REGULATORS | Motorola Semiconductors |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |