Datasheet.kr   

N-TMP-3-2 PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 N-TMP-3-2
기능 Non-reflective Terminations (N / TNC / SSMA / POB / FL / and PO6)
제조업체 Hirose Electric
로고 Hirose Electric 로고 


전체 3 페이지

		

No Preview Available !

N-TMP-3-2 데이터시트, 핀배열, 회로
Non-reflective Terminations (N, TNC, SSMA, POB, FL, and PO6)
N, TNC, POB, FL, PO6, and HRMM-TM Series
sFeatures
1.High Performance
POB-TMP-025 TNC-TMP-1 N-TMP-1-1 N-TMP-3-2
N-TMP-5
FL-TMP-025-1 PO6-TMP-025-1 PO6-TMLP-025 HRMM-601A HRMM-602A
sProduct Specifications
These super wide bandwidth/ultra high matching non-
reflective termination use Hirose Electric original high
frequency matching technology.
2.Full Compliment of Connector Forms
are Available
A wide variety of types are available in addition to the
BNC and SMA (Hirose Electric HRM Series) types.
These include the world standard N, TNC, and SSMA
(Hirose Electric HRMM Series) types, our miniaturized
FL Series, and the PO6 Series with apertures.
Ratings
Frequency range (Note)
Characteristic impedance
Maximum usable power (Note)
DC to 18.0 GHz
50 ohms
0.25 to 5 W
Operating temperature range
Operating relative humidity
Note: The frequency range and the maximum input power will differ depending on the products.
-10ç to +65ç
95% Max.
Item
Standard
Conditions
1.Vibration
2.Shock
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
3.Temperature cycle
No electrical discontinuity of 1 µs or more
qThe test method conforms to MIL-STD-202.
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
N Type
Part
Connector Body
Insulator
Male contacts
External contacts
Coupling
Radiator
Resistor
Material
Brass
PTFE
Brass
Phosphor bronze
Brass
Aluminum
Metal film
Finish
Nickel plating
----------
Gold plating
Silver plating
Nickel plating
Black alumite
----------
TNC, POB, FL, and PO6 Types
Part
Material
Finish
Connector Body
Brass
Nickel plating
Insulator
PTFE
----------
Male contacts
Brass
Gold plating
Resistor
Metal film
----------
HRMM Type
Part
Connector Body
Insulator
Male contacts
Female contacts
Outer conductor
Coupling
Resistor
Material
Stainless steel
PTFE
Brass
Beryllium copper
Brass
Stainless steel
Metal film
Finish
Nickel plating
----------
Gold plating
Gold plating
Nickel plating
Passivated
----------
sOrdering Information
N, TNC, POB, FL, and PO6 Types
P06 - TM P - 025 - 1
1 23 4 5
1 Series name
4 Power
2 TM:Indicates a non-reflective termination
3 Connector type
(Example) 025: 0.25 W
1:1W
P: Plug type
J: Jack type
5 Suffix
HRMM Type
HRMM - 601 A
1 23
1 Series Name: HRMM Series
2 600 to 699: Indicates a non-reflective termination
3 Coupling Finish
A: Passivated (without cap)
64






구       성총 3 페이지
다운로드[ N-TMP-3-2.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
N-TMP-3-2

Non-reflective Terminations (N / TNC / SSMA / POB / FL / and PO6)

Hirose Electric
Hirose Electric

추천 데이터시트

부품번호상세설명 및 기능제조사
CQ1565RT

FSCQ1565RT, Green Mode Fairchild Power Switch. In general, a Quasi-Resonant Converter (QRC) shows lower EMI and higher power conversion efficiency compared to conventional hard-switched converter with a fixed switching frequency.

Fairchild
Fairchild
KF16N25D

MOSFET의 기능은 N Channel MOS Field effect transistor입니다. This planar stripe MOSFET has better characteristics, such as fast switching time, low on resistance, low gate charge and excellent avalanche characteristics. It is mainly suitable for DC/DC Converters and switching mode power supplies.( Vdss=250V, Id=13A )

KEC
KEC

DataSheet.kr    |   2018   |  연락처   |  링크모음   |   검색  |   사이트맵