|
|
|
부품번호 | N74F132D 기능 |
|
|
기능 | Quad 2-input NAND Schmitt trigger | ||
제조업체 | Philips | ||
로고 | |||
전체 8 페이지수
INTEGRATED CIRCUITS
74F132
Quad 2-input NAND Schmitt trigger
Product specification
IC15 Data Handbook
1991 Jun 26
Philips
Semiconductors
Philips Semiconductors
Quad 2-input NAND Schmitt trigger
Product specification
74F132
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL
PARAMETER
TEST CONDITIONS1
LIMITS
MIN TYP2 MAX
UNIT
VT+ Positive-going threshold
VCC = 5.0V
1.5 1.7 2.0
V
VT– Negative-going threshold–
VCC = 5.0V
0.7 0.9 1.1
V
nVT
Hysteresis (VT+ – VT–)
VCC = 5.0V
0.4 0.8
V
VOH High-level output voltage
VCC = MIN,
VI=VT–MAX, IOH = MAX
±10%VCC
±5%VCC
2.5
2.7
3.4
V
VOL Low-level output voltage
VCC = MIN,
VI=VT+MAX, IOL = MAX
±10%VCC
±5%VCC
0.30 0.50
0.30 0.50
V
VIK Input clamp voltage
VCC = MIN, II = IIK
–0.73 –1.2
V
IT+ Input current at positive-going threshold VCC = 5.0V, VI=VT+
0 µA
IT– Input current at negative-going threshold VCC = 5.0V, VI=VT–
–350
µA
II
Input current at maximum input voltage
VCC = MAX, VI = 7.0V
100 µA
IIH High-level input current
VCC = MAX, VI = 2.7V
20 µA
IIL Low-level input current
IOS Short-circuit output current3
VCC = MAX, VI = 0.5V
VCC = MAX
–0.6 mA
–60
–150
mA
ICC Supply current (total)
ICCH VCC = MAX
ICCL
VI N= GND
VIN = 4.5V
8.5 12.0
13.0 19.5
mA
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at VCC = 5V, Tamb = 25°C.
3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold
techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting
of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any
sequence of parameter tests, IOS tests should be performed last.
1991 Jun 26
4
4페이지 Philips Semiconductors
Quad 2-input NAND Schmitt trigger
SO14: plastic small outline package; 14 leads; body width 3.9 mm
Product specification
74F132
SOT108-1
1991 Jun 26
7
7페이지 | |||
구 성 | 총 8 페이지수 | ||
다운로드 | [ N74F132D.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
N74F132D | Quad 2-input NAND Schmitt trigger | Philips |
N74F132N | Quad 2-input NAND Schmitt trigger | Philips |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |