|
|
Número de pieza | OPA4830 | |
Descripción | Low-Power / Single-Supply / Wideband Operational Amplifier | |
Fabricantes | Burr-Brown | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de OPA4830 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! BurrĆBrown Products
from Texas Instruments
¨
OPA4830
SBOS350 – DECEMBER 2006
Quad, Low-Power, Single-Supply, Wideband Operational Amplifier
FEATURES
• HIGH BANDWIDTH:
280MHz (G = +1)
120MHz (G = +2)
• LOW SUPPLY CURRENT:
3.9mA/ch (VS = +5V)
• FLEXIBLE SUPPLY RANGE:
±1.4V to ±5.5V Dual Supply
+2.8V to +11V Single Supply
• INPUT RANGE INCLUDES GROUND ON
SINGLE SUPPLY
• 4.91V OUTPUT SWING ON +5V SUPPLY
• HIGH SLEW RATE: 560V/µs
• LOW INPUT VOLTAGE NOISE: 9.2nV/√Hz
• AVAILABLE IN A TSSOP-14 PACKAGE
APPLICATIONS
• SINGLE-SUPPLY ANALOG-TO-DIGITAL
CONVERTER (ADC) INPUT BUFFERS
• SINGLE-SUPPLY VIDEO LINE DRIVERS
• CCD IMAGING CHANNELS
• ACTIVE FILTERS
• PLL INTEGRATORS
• PORTABLE CONSUMER ELECTRONICS
+3.3V
2.26kW
+3.3V
374W
VIN
1/4
OPA4830
100W
22pF
1/4
ADS5240
12-Bit
40MSPS
562W
750W
DESCRIPTION
The OPA4830 is a quad, low-power, single-supply,
wideband, voltage-feedback amplifier designed to
operate on a single +3V or +5V supply. Operation on
±5V or +10V supplies is also supported. The input
range extends below the negative supply and to
within 1.8V of the positive supply. Using
complementary common-emitter outputs provides an
output swing to within 220mV of either supply while
driving 150Ω. High output drive current (±80mA) and
low differential gain and phase errors also make this
amplifier an excellent choice for single-supply
consumer video products.
Low distortion operation is ensured by the high gain
bandwidth product (110MHz) and slew rate
(560V/µs), making the OPA4830 an ideal input buffer
stage to 3V and 5V CMOS analog-to-digital
converters (ADCs). Unlike other low-power,
single-supply amplifiers, distortion performance
improves as the signal swing is decreased. A low
9.2nV/√Hz input voltage noise supports wide
dynamic range operation.
The OPA4830 is available in an industry-standard
quad pinout TSSOP-14 package.
RELATED PRODUCTS
DESCRIPTION
Rail-to-Rail
Rail-to-Rail Fixed-Gain
General-Purpose
(1800V/µs slew rate)
Low-Noise,
High DC Precision
SINGLES DUALS TRIPLES
OPA830 OPA2830
—
OPA832 OPA2832 OPA3832
QUADS
—
—
OPA690 OPA2690 OPA3690
—
OPA820 OPA2822 — OPA4820
Figure 1. DC-Coupled, +3.3V ADC Driver
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated
1 page OPA4830
www.ti.com
SBOS350 – DECEMBER 2006
ELECTRICAL CHARACTERISTICS: VS = +5V
Boldface limits are tested at +25°C.
At TA = +25°C, G = +2, RF = 750Ω, and RL = 150Ω to VS/2, unless otherwise noted.
OPA4830IPW
TYP
MIN/MAX OVER TEMPERATURE
PARAMETER
CONDITIONS
+25°C
+25°C (2)
0°C to
+70°C (3)
–40°C to
+85°C (3)
AC PERFORMANCE (see Figure 72)
Small-Signal Bandwidth
Gain-Bandwidth Product
G = +1, VO ≤ 0.2VPP
230
G = +2, VO ≤ 0.2VPP 100 70 68 66
G = +5, VO ≤ 0.2VPP 21 15 14 13
G = +10, VO ≤ 0.2VPP
10
7
6
5
G ≥ +10
100 75 65 59
Peaking at a Gain of +1
VO ≤ 0.2VPP
5
Slew Rate
G = +2, 2V Step 500 270 260 250
Rise Time
0.5V Step
3.4 5.8 5.9 6.0
Fall Time
0.5V Step
3.4 5.8 5.9 6.0
Settling Time to 0.1%
G = +2, 1V Step 44 65 67 68
Harmonic Distortion
2nd-Harmonic
3rd-Harmonic
VO = 2VPP, f = 5MHz
RL = 150Ω
–56 –50 –49 –48
RL ≥ 500Ω
–62 –56 –55 –54
RL = 150Ω
–58 –50 –49 –48
RL ≥ 500Ω
–84 –65 –62 –60
Input Voltage Noise
f > 1MHz
9.2 10.3
10.8
11.3
Input Current Noise
f > 1MHz
3.5 4.6 5.1 5.6
NTSC Differential Gain
0.08
NTSC Differential Phase
0.09
All Hostile Crosstalk, Input-Referred
DC PERFORMANCE(4)
3 Channels Driven at 5MHz,
1VPP, 4th Channel Measured
RL = 150Ω
–62
Open-Loop Voltage Gain
72 66 65 64
Input Offset Voltage
±0.5 ±6
±7 ±7.5
Average Offset Voltage Drift
±24 ±24
Input Bias Current
Input Bias Current Drift
VCM = 2.5V
+5 +10 +12 +13
±44 ±46
Input Offset Current
Input Offset Current Drift
VCM = 2.5V
±0.2 ±0.9 ±1.1 ±1.3
±5 ±6
INPUT
Least Positive Input Voltage(5)
–0.5
-0.4
–0.3
-0.2
Most Positive Input Voltage(5)
3.2 3.1 3.0 2.8
Common-Mode Rejection Ratio (CMRR)
Input-Referred
80 76 74 71
Input Impedance
Differential-Mode
10 || 2.1
Common-Mode
400 || 1.2
OUTPUT
Least Positive Output Voltage
G = +5, RL = 1kΩ to 2.5V
0.09
0.11
0.12
0.13
G = +5, RL = 150Ω to 2.5V
0.21
0.24
0.25
0.26
Most Positive Output Voltage
G = +5, RL = 1kΩ to 2.5V
4.91
4.89
4.88
4.87
G = +5, RL = 150Ω to 2.5V
4.78
4.75
4.73
4.72
Current Output, Sourcing and Sinking
±75 ±58 ±53 ±50
Short-Circuit Output Current
Output Shorted to Either
Supply
±140
Closed-Loop Output Impedance
G = +2, f ≤ 100kHz
0.06
UNITS
MHz
MHz
MHz
MHz
MHz
dB
V/µs
ns
ns
ns
dBc
dBc
dBc
dBc
nV/√Hz
pA/√Hz
%
°
dB
dB
mV
µV/°C
µA
nA/°C
µA
nA/°C
V
V
dB
kΩ || pF
kΩ || pF
V
V
V
V
mA
mA
Ω
MIN/
MAX
typ
min
min
min
min
typ
min
max
max
max
max
max
max
max
max
max
typ
typ
typ
min
max
max
max
max
max
max
max
min
min
typ
typ
max
max
min
min
min
typ
typ
TEST
LEVEL (1)
C
B
B
B
B
C
B
B
B
B
B
B
B
B
B
B
C
C
C
A
A
B
A
B
A
B
A
A
A
C
C
A
A
A
A
A
C
C
(1) Test levels: (A) 100% tested at +25°C. Over temperature limits set by characterization and simulation. (B) Limits set by characterization
and simulation. (C) Typical value only for information.
(2) Junction temperature = ambient for +25°C specifications.
(3) Junction temperature = ambient at low temperature limits; junction temperature = ambient +9°C at high temperature limit for over
temperature specifications.
(4) Current considered positive out of pin.
(5) Tested < 3dB below minimum specified CMRR at ± CMIR limits.
Submit Documentation Feedback
5
5 Page OPA4830
www.ti.com
SBOS350 – DECEMBER 2006
TYPICAL CHARACTERISTICS: VS = ±5V (continued)
At TA = +25°C, G = +2V/V, RF = 750Ω, and RL = 150Ω to GND, unless otherwise noted (see Figure 74).
FREQUENCY RESPONSE vs CAPACITIVE LOAD
8
7 CL = 10pF
6 CL = 100pF
5
4 CL = 1000pF
3
2
1 VI
0
-1
-2
1/4
50W OPA4830
750W
RS
CL
VO
1kW(1)
750W
NOTE: (1) 1kW is optional.
-3
1
10 100 200
Frequency (MHz)
Figure 14.
RECOMMENDED RS vs CAPACITIVE LOAD
120
110 0.1dB Peaking Targeted
100
90
80
70
60
50
40
30
20
10
1
10 100 1k
Capacitive Load (pF)
Figure 15.
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
10
OUTPUT SWING vs LOAD RESISTANCE
G = +5V/V
VS = ±5V
100
Resistance (W)
1k
Figure 16.
OUTPUT VOLTAGE AND CURRENT LIMITATIONS
6 1W Internal Power Limit, One Channel Only
5
4
Output
Current Limit
3 RL = 500W
2
1
0
RL = 50W
RL = 100W
-1
-2
-3
Output
-4 Current Limit
-5
-6
-160 -120
-80
-40
0
1W Internal
Power Limit
40 80 120 160
IO (mA)
Figure 17.
Submit Documentation Feedback
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet OPA4830.PDF ] |
Número de pieza | Descripción | Fabricantes |
OPA4830 | Quad Low-Power Single-Supply Wideband Operational Amplifier (Rev. A) | Texas Instruments |
OPA4830 | Low-Power / Single-Supply / Wideband Operational Amplifier | Burr-Brown |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |